SmartAX MA5612 and MA5616 - huaweigpon.cz

1 HUAWEI TECHNOLOGIES CO., MA5612 and MA5616 Huawei SmartAX MA5612 and MA5616 are leading remote Multi-Dwelling Unit (MDU) products, which provide various types of ports on the Passive Optical Network (PON) and meet multiple service requirements. These products mainly apply to Fiber To The Curb (FTTC) and Fiber To The Building (FTTB) scenarios. In addition, they can satisfy some private line access requirements. Huawei MA5612 and MA5616 feature wide temperature range, low power consumption, silent design, high-density access, reliable performance, and energy savings, and can be installed in multiple scenarios, such as the desk, corridor, and AppearanceMA5612MA5616 High-density access: An MA5616 supports a maximum of 256 POTS users, 128 ADSL2+ users, 192 VDSL2 users, or 64 FE users.

2 Flexible service configuration: Service boards can be inserted in any slot. Various types of ports can be flexibly configured for multiple application scenarios. In addition, combo boards are supported, which effectively improve access density, save equipment room space, and simplify cabling. Support for multiple clock synchronization technologies, such as synchronous Ethernet, E1 line clocks and GPON line broadband service scenario: In the upstream direction, the MA5612 connects to the optical line terminal (OLT) through the gigabit passive optical network (GPON).

3 In the downstream direction, the MA5612 connects to a PC by using the category-5 cable to provide high-bandwidth broadband, voice, and video services and connects to a telephone by using twisted pairs to provide plain old telephone service (POTS) services. Enterprise leased line scenario: For a traditional private branch exchange (PBX) and router, the MA5612 provides a TDM E1 port to transmit leased line services to the OLT by using the native TDM technology. The MA5612 also provides a primary rate interface (PRI) that converts E1 frames transmitted by the PBX to Session Initiation Protocol (SIP) or packets and transmits them to the OLT.

4 For an IP PBX and router, the MA5612 provides an FE or GE port to transmit leased line services to the OLT by using the virtual local area network (VLAN) transparent transmission MA5616 provides two GPON or GE uplink ports and provides multiple services by supporting flexible board configurations. The MA5616 provides broadband, voice, and video services through ADSL2+/ VDSL2/FE boards, voices service through POTS boards, leased line services through SHDSL or P2P ScenariosOLTGPONMA5612E1 FEFE/GEPOTSP2P/FEADSL2+/VDSL2MA5616iMana ger U2000 NGN / IMSPBXIP PBXIP RouterphoneEnterpriseHomeIP/MPLS Perfect voice features, supporting basic services (voice service, fax service, and modem service)

5 And supplementary services (three-way calling, call waiting, call transfer, calling line identification presentation, and calling number restriction) Efficient Operation, Administration, and Management (OAM): The MA5612 and MA5616 support remote configuration delivery and, therefore, do not require on-site commissioning. In addition, they support plug and play, remote monitoring, and maintenance functions. Plug-and-play (PnP) service provisioning: The MA5612 allows remote issuing of configuration. A management channel and service channel are created after the MA5612 is powered on and registers successfully.

6 Manual onsite configuration is not required. High reliability: The MA5612 and MA5616 supports the working temperature from -40 C to 65 C, 6 kV lightning protection, and corrosion-proof design of boards. Energy saving: Huawei reduces system power consumption via efficient power supplies, reduces power consumption of idle boards by supporting intelligent fan speed adjustment, reduces chip power consumption using high-performance chips, and reduces port power consumption by supporting POTS short-loop T-CONTs1000 GEM portsBroadband4K VLANs, supporting QinQ and stacking VLANs4K MAC addresses, supporting VMACVLAN switchingConversion from PPPoA to PPPoE and from IPoA to , supporting PQ and WRR flow control.

7 And ACLV oiceSIP and BRA portPOTS short-loop designADSL2+Compliance with ITU-T to , and MADSL2+ bonding (2-wire, 4-wire, 6-wire, or 8-wire) , 8b, 8c, 8d, 12a, 12b, 17a, and 30a profiles2-wire VDSL2 , supporting ATM and PTMEFM bonding (2-wire, 4-wire, 6-wire, or 8-wire)MulticastIGMPv2 and IGMPv3 IGMP proxy and IGMP snoopingA maximum of 1024 configurable multicast programs in the systemA maximum of 256 multicast usersA maximum of 16 concurrent multicast programs for each userSecurityPPPoE+ and DHCP option82 Static and dynamic MAC address bindingAnti-MAC and anti-IP spoofing.

8 Source MAC address and IP address filteringAnti-DoS attack and firewallMaintenance and managementSNMPv1, SNMPv2, and SNMPv3 Telnet and SSHv2 Remote and batch pre-deploymentRemote upgrade and monitoringKey FeaturesCopyright Huawei Technologies Co., Ltd. 2014. All rights DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF TECHNOLOGIES CO., Industrial BaseBantian LonggangShenzhen 518129, ChinaTel: +86-755-28780808 Version No.: AppearanceMA5612 MA5616 Dimensions (Width x Depth x Height)442mm x 245mm x x 245mm x PortAvailable configuration modes: 2 x GPON 2 x GE (optical) 1 x GE (optical) + 1 x GPONC ontrol boards: CCUB: GPON/GE, 1*GE (either optical or electrical)CCUC/CCUE: GPON/GE, 1*GE (either optical or electrical)User-Side PortThe MA5612 is a device in which service boards are mountable.

9 Specifically, the MA5612 supports fixed configurations and two additional slots for board insertion. Two types of fixed configurations are supported: 2 x GE (electrical) + 6 x FE (electrical)2 x GE (electrical) + 6 x FE (electrical) + 16 x POTSThe two slots can house the following boards: 8 x FE (electrical) board16 x POTS board8 x E1 boardMA5616 has 4 service boards, There are 13 kinds of card type: ASRB: 328 POTS; ASPB: 64*POTSDSLD: 8*ISDNADLE: 32*ADSL2+; ADPE: 64*ADSL2+CALE: 32*ADSL2+ +32*POTSCVLC/CVLE: 32 VDSL2+32 POTSCCME: 48 VDSL2+48 POTSEIUA: 16*FE.

10 EIUD: 4GE (optical/electrical) +4FE (optical)VCLE: 32*VDSL2, VectoringVCPE: 64*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17aVDGE: 16*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30aVDSH: 24*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17aVDTH: 24*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDSE: 24*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDLE: 32*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDLF: 32*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aSHLH: 16*SHDSL, ATM SHDHL, EFM SHDHLEDTB: +8E1 Working Temperature-40 C to 65 C; -25 C in case of equipment starting-40 C to 65 C; -25 C in case of equipment starting-40 C to 65 C; -25 C in case of equipment startingAmbient Humidity5% Relative Humidity (RH) to 95% RH, non-condensing5% RH to 95% RH, non-condensing5% RH to 95% RH, non-condensingLightning Protection CapabilityGE/FE: 6 kV; POTS: 4 kVGE/FE: 6 kV; POTS: 4 kVGE/FE: 6 kV; POTS: 4 kVPower SupplyAC: 220 V/110 VDC: -48 VAC: 220 V/110 VDC: -48 VAC: 220 V/110 VDC: -48 VBackup PowerSupports 12 V backup 48 V backup power.