Solenoid/pneumatic valves, ISO 15407-1 - Festo USA

1 Solenoid/pneumatic valves , iso 15407 -1q/wFesto core product rangeCovers 80% of your automation tasksWorldwide:Always in stockSuperb: Festo quality at an attractive priceEasy:Reduces procurement and storing complexityqGenerally ready for shipping ex works in 24 hoursHeld in stock in 13 service centres worldwideMore than 2200 productwGenerally ready for shipping ex works in 5 daysAssembled for you in 4 service centres worldwideUp to 6 x 1012 variants per product seriesLook for the star!Subject to change 2018/082 Internet: valves , ISO 15407-1 Key featuresInnovativeVersatileReliableEasy to install High-performance valves in a sturdymetal housing Individual electrical connection viasquare round plug sockets Valve replacement under pressurepossible using vertical pressureshut-off plate Reverse operation Vacuum operation Modular system offering a range ofconfiguration options Easy to convert or extend at a laterdate Integration of innovative functionmodules possible Regulator plate Flow control plate Vertical pressure shut-off plate Vertical supply plate Vertical supply plates permit aflexible air supply and variablepressure zones Wide range of valve functions Extensive operating voltage rangefrom 12 V DC to 230 V AC Sturdy and durable metalcomponents valves Horizontally linked sub-bases Vertically stacked sub-bases Fast troubleshooting thanks to LEDs in the plug socket or in the illuminating seal or in the valve Convenient servicing thanks tovalves that can be replaced quicklyand

2 Easily Manual override Durable thanks to tried-and-testedpiston spool valves Secure mounting on wall or H-rail Combi manifolds of width 18 mmand 26 mm Plug-in pressure gauges on theregulator plate2018/08 Subject to change3 Internet: valves , ISO 15407-1 Key featuresSingle valve manifold VTIAS ignal status display via LEDV arious valve functionsFittings with external hexOne valve series for different flow ratesSignal status display via illuminating sealManual overrideBlanking plate for vacant/expansion positionPilot valve with port pattern toISO 15218 Various voltagesEquipment options5/2-way valve2x 3/2-way valve, single solenoid5/3-way valve Single solenoid , pneumatic orspring return Double solenoid valve Double solenoid valve withdominance at 14 Normally open Normally open, reversible (on request) Normally closed Normally closed, reversible (on request) 1x normally open, 1x normallyclosed 1x normally open, 1x normallyclosed, reversible (on request) Mid-position valve Normally open Normally closed Normally exhausted2x 2/2-way valve, single solenoid Normally closedSpecial featuresOperation with external pilot airsupply For vacuum applications For operating pressure of less than3 bar For significant pressure fluctu ations in the power section.

3 Powersection and pneumatic controlsection are isolated For heavily lubricated air in thepower section For manifolds if the pressure zonesare created via ducts 3 and 5 (notpossible with 2x 3/2) For manifolds or pressure zonesthat are equipped with reversible2x 3/2-way valves ( valves onrequest)Operation with internal pilot airsupply For small pressure fluctuations inthe power section For using pressure regulator platesin a vertical stacking construction,also in reverse operation As a low-cost solutionReverse operation with compressedair supply via ducts 3 and 5 Pressure zone separation via ducts3 and 5 Example: duct 3 vacuum, duct 5ejector pulse Example: duct 3 high pressurefor advancing the piston rod of adouble-acting cylinder. Duct 5low pressure for retracting thepiston rod with low energyconsumption 2x 3/2-way valves used as 5/4-wayvalve with controllable lap andpressure zone separation with thereversible variantReverse operation with a pressureregulator plate, compressed airsupply via duct 1 Reversible pressure regulator com bined with a reversible 2x 3/2-wayvalve regulates outputs 2 and 4 AB regulator for each of outputs2 and 4 A regulator for output 4 B regulator for output 2 Reversible pressure regulators arein the control position immediatelyafter the power supply is switchedon Adjustment possible at all times Dynamic response characteristics Reduced regulator load becausethe supply pressure is main tained when the valve is switched Not exhausted via the regulatorSubject to change 2018/084 Internet.

4 valves , ISO 15407-1 Key featuresValve manifold VTIA with combination of sizes and vertical stackingPressure regulator for settingthe force of the actuated driveWidths of 18 mm and 26 mmcan be combinedPressure shut-off plate forreplacing valves during operationFlow control plate in the valvemanifold for adjusting the speedof the driveSupply plate for compressed airsupply of a control chain as aseparate pressure zoneIntermediate plate as interfacebetween width 18 mm and width26 mmSolenoid valve with central round plugSolenoid valve with individual pilot valvesand pneumatic interface to ISO be connected with square plug socketsor round plugsVertical stacking functionPressure regulator valveFlow control plateVertical pressure shut-off plateVertical supply plate Single variant to regulate thepressure at output 4(A) or 2(B) or atinput 1(P) Dual variant to regulate thepressure at output 4(A) and 2(B)individually Reverse variant for the outputs sothat the regulator is in the controlposition With pressure gauge connection Designed with two flow controlvalves for adjusting the exhaust airflow rate at exhausts 5 or 3.

5 Thisallows the drive to be set in motionand the desired speed to be set atthe manifold using the manualoverride. Equipped with a switch via whichthe compressed air supply can beshut off. A directional control valveor subsequent vertical stackingplate can thus be replaced withoutswitching off the overall air supply If the control chain has a redundantdesign, the cycle can continue evenwith cyclical control As additional air supply for a valve To supply a third pressure zoneIndividual connection with square plug, type CIndividual connection with central round plugThe directional control valve has apilot control to ISO 15218 and a plugpattern to EN 175301-803, type electrical connection is estab lished using a standardised M12- orM8 socket 24 V DC(EN 61076-2-101).2018/08 Subject to change5 Internet: valves , ISO 15407-1 Key featuresSingle valve manifold VTIA, directional control valves with square plug, type CSingle valve manifold VTIA, pressure zones via duct 3 and 54212 Design Width 26 mm Vacant position Compressed air supply via duct 1 External pilot air supply With fittings Venting via silencer for ducts 3and 5 Design Width 26 mm Vacant position Compressed air supply via ducts3 and 5 External pilot air supply With fittings Venting via silencerValve manifold VTIA fitted with width 18 mm and 26 mm, directional control valves with square plug, type CValve manifold VTIA fitted with width 18 mm and 26 mm.

6 Directional control valves with central round plug42124212 Design Width 18 mm and 26 mmcombined via intermediate plate Vacant position Compressed air supply via duct 1 External pilot air supply With fittings Venting via silencer for ducts 3 and5 on the end plates and for duct 3also on the intermediate plateDesign Width 18 mm and 26 mmcombined via intermediate plate Vacant position Compressed air supply via duct 1 Internal pilot air supply With fittings Venting via silencer for ducts 3 and5 on the end plates and for duct 3also on the intermediate plateValve manifold VTIA with maximum expansion with all vertical stacking modules2421224 Design Width 18 mm and 26 mmcombined via intermediate plate Directional control valves withsquare plug Pressure regulators Flow control plates Shut-off plates Supply plates with vacant positionPneumatically actuated directional control valveon individual sub-baseValve manifold VTIA fitted with width 18 mm and 26 mm, with pneumatically actuated directional control valvesDirectional control valves on anindividual sub-base can be used fordrives that are further away from avalve manifold or when there is onlyone drive Width 18 mm and 26 mmcombined via intermediate plate Vacant position Compressed air supply via duct 1 With fittings Venting via silencer for ducts 3 and5 on the end plates and for ducts 3and 5 also on the intermediateplateSubject to change 2018/086 Internet.

7 valves , ISO 15407-1 Key featuresSolenoid valves with square plug, type CSolenoid valves with central round plugVersions Width 18 mm and 26 mm 2x 2/2-way, 2x 3/2-way, 5/2-wayand 5/3-way valves 2x 3/2-way valves for reverseoperation Internal or external pilot air supplyavailable 12, 24 V DC, 24, 110 or 220 V ACVersions Width 18 mm and 26 mm 2x 3/2-way, 5/2-way and 5/3-wayvalves Internal or external pilot air supplyavailable 24 V DCBasic valves with interface to ISO 15218 solenoid valves with M12 round plugVersions Width 18 mm and 26 mm 2x 2/2-way, 2x 3/2-way, 5/2-wayand 5/3-way valves Internal or external pilot air supplyavailableVersions Width 18 mm and 26 mm 2x 2/2-way, 2x 3/2-way, 5/2-wayand 5/3-way valves 2x 3/2-way valves for reverseoperation Internal or external pilot air supplyavailable 24 V DCPilot valve with interface to ISO 15218 Pneumatically actuated directional control valvesVersions With square plug, type C or M12round plug For 12, 24 V DC and 24 V ACwithout protective earth conductor For 110 and 220 V AC withprotective earth conductor 3/2-way valve Manual override non-detenting ornon-detenting/detentingVersions Width 18 mm and 26 mm 2x 3/2-way.

8 5/2-way and 5/3-wayvalves Signal inputs 12 and 14 via thesub-baseIndividual sub-baseBlanking plate for unused valve positionVersions Width 18 mm and 26 mm Ports 12 and 14 for external pilotair supply for solenoid valves and Ports signal inputs 12 and 14 forpneumatically actuated valves arethe sameVersions Width 18 mm and 26 mmEnd plate kitManifold sub-base/series sub-baseVersions Widths 18 mm and 26 mm Ports 12 and 14 for external pilotair supply for solenoid valves For pneumatically actuated valvesthe signal inputs are only onsuitable manifold sub-basesVersions Widths 18 mm and 26 mm For solenoid valves For pneumatically actuated valveswith additional ports for the signalinputsIntermediate plateIntermediate plate kitDesign Adapter between width 18 mm and26 mm With additional air supply andexhaust portsDesign Intermediate plate as adapterbetween width 18 mm and 26 mm One 18 mm and one 26 mm endplate2018/08 Subject to change7 Internet: valves , ISO 15407-1 Key featuresPressure regulator plate with one pressure regulatorPressure regulator plate with two pressure regulatorsVersions Widths 18 mm and 26 mm For pressure regulation at supplyinput 1 (P).

9 Set pressure is thesame for outputs 2 and 4 For pressure regulation at workingport 4 (A) The pressure regulator for re verse operation is supplied viaport 1 of the sub-base and sup plies port 5 on the directionalcontrol valve The directional control valvevents via port 1 to ports 3 and 5of the sub-base For pressure regulation at workingport 2 (B) Input 3 is supplied here inreverse operationVersions Widths 18 mm and 26 mm For pressure regulation at workingports 4 (A) and 2 (B) The pressure regulators for re verse operation are supplied viaport 1 in the sub-base and feedinputs 5 and 3 on the directionalcontrol valve The directional control valvevents via port 1 to ports 3 and 5of the sub-baseVertical supply plateFlow control plateVersions Widths 18 mm and 26 mm As intermediate supply For one valve To supply a third pressure zone Can be equipped with a directionalcontrol valveVersions Widths 18 mm and 26 mm Exhaust air restrictors in ducts 3and 5 In the case of pressure zonesthat are formed by ducts 3 and 5,the flow control plates act assupply air restrictorsVertical pressure shut-off platePressure gaugeVersions Widths 18 mm and 26 mm A switch activated with a slottedhead screwdriver shuts off duct 1 The overlying flow control plates,pressure regulator plates ordirectional control valves can bereplaced Other components of the controlchain such as drives, for ex ample.

10 Can be replaced followingventing via the directionalcontrol valveDesign Can be connected to the pressureregulator platesSubject to change 2018/088 Internet: valves , ISO 15407-1 Key featuresPort pattern on sub-base to ISO 15407-1 Width 26 mmWidth 18 mm13512 414 2 Hole for codingpinVSVAC onversion of pilot air exhaustThe valve manifold VTIA is suppliedwith unducted pilot air exhaust. Byturning the seal between the valveand manifold block, exhaust air (pilotair) can be diverted into pilot duct 12and can thus be contained andsilenced (see illustration).1231 Ducted pilot air exhaust2 Turning the seal by 180 3 Unducted pilot air exhaust(as supplied)2018/08 Subject to change9 Internet: valves , ISO 15407-1 Key featuresUse of 2x 3/2-way valve as 5/4-way valveCodeCircuit symbolValue tableEquivalent circuit symbolFunctionK Normally exhausted The double-acting drive connected to outputs 2 and4 is unpressurised when the valve is in the normalposition and can be moved by an external force If there is a signal present at Y1(14) and Y2(12),there is pressure at outputs 2 and 4 Normally closed (by combining directional controlvalve code K and two piloted non-return valves ) The piloted non-return valves connected to outputs2 and 4 are unpressurised when the valve is in thenormal position and the pressures in the drive closethe non-return valves so it is leak-tight The drive remains stationary when the forces are inequilibrium Leakages can only occur via the drive seals If there is a signal present at Y1(14) and Y2(12)