SolidWorks 97Plus User’s Guide - RickyJordan.com

1 SolidWorks 97 Plus user s Guide 1997, SolidWorks Corporation, 150 Baker Avenue Ext., Concord, Massachusetts 01742 - All Rights is subject to change without notice. No material may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of SolidWorks a condition to your use of this software product, you agree to accept the limited warranty, disclaimer and other terms and conditions set forth in the SolidWorks Corporation License Agreement which accompanies this software.

2 If, after reading the License Agreement, you do not agree with the limited warranty, the disclaimer or any of the other terms and conditions, promptly return the unused software and all accompanying documentation to SolidWorks Corporation and your money will be is a registered trademark of SolidWorks 97 Plus is a product name of SolidWorks is a trademark of SolidWorks Corporation. ACIS is a registered trademark of Spatial Technlogy, Access Library is a trademark of IGES Data Analysis, Inc. Other brand or product names are trademarks or registered trademarks of their respective COMPUTER SOFTWARE - PROPRIETARYThis computer software is Commercial Computer Software, as defined in subparagraph (a) (1) of DFAR section , Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation.

3 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the SolidWorks Corporation License Agreement accompanying this computer of this software are copyrighted by and are the property of Electronic Data Systems of this software 1995 - 1997 D-Cubed of this software 1992-1997 Summit Software of this software 1990-1997 LightWork design of this software 1995-1997 Spatial Technology, IGES Access Library portion of this product is based on IDA IGES Access Library 1989-1997 IGES Data Analysis, Inc.

4 All Rights Reserved. Document Number: UG0797-ESolidWorks 97 Plus user s Guide1-11 SolidWorks FundamentalsWhat is SolidWorks 97 Plus? SolidWorks 97 Plus is mechanical design automation software that takes advantage of the familiar Microsoft WindowsTM graphical user interface. This easy-to-learn tool makes it possible for mechanical designers to quickly sketch out ideas, experiment with features and dimensions, and produce models and detailed chapter discusses some basic concepts and terminology used throughout the SolidWorks 97 Plus application.

5 It provides an overview of the following topics: qInstalling the SolidWorks 97 Plus SoftwareqSolidWorks Terms and Document WindowsqFeatureManagerTM design TreeqRight-Mouse MenusqSelecting ItemsqToolbarsqTime Saving TipsqFinding Out What is WrongqRendering Models With PhotoWorksqUsing the SolidWorks API Development EnvironmentChapter 1 SolidWorks Fundamentals1-2 Installing the SolidWorks 97 Plus SoftwareSystem RequirementsqMicrosoft Windows NT or Windows 95 qPentium -based computer, or DEC AlphaStationTMq32 MB RAM minimum.

6 48 MB or more recommendedqMouse or other pointing deviceqCD-ROM driveRequired Information for InstallationThe SolidWorks 97 Plus CD installation program guides you through the installation procedure and asks for the following information:qThe type of installation: Individual. This installation is the most common choice. It should be selected for a computer that will not share its SolidWorks installation with any other computers, whether or not it is on a network. Client/Server. This installation should be selected for a computer that will run SolidWorks , and will also act as a server, sharing its SolidWorks installation with one or more other computers.

7 Server Only. This installation should be selected for a computer that will not run the SolidWorks 97 Plus application, but will only act as a server, sharing its SolidWorks installation with one or more other computers ( SolidWorks clients). (You must reinstall if you want to change this selection.) With this option, the server does not need to be licensed to run the SolidWorks application, but each client must be :Before starting a SolidWorks update installation, it is important to ensure that no SolidWorks clients are Serial Number.

8 Your serial number is located on the SolidWorks Registration Form and the back of the CD-ROM Registration Code. You will receive your registration code when you register your software. (You can proceed with the installation and use the SolidWorks application until you receive the registration number.)Note: The server and clients must be of the same type platform. SolidWorks 97 Plus user s Guide1-3qPhotoWorks Serial Number. If you purchased the PhotoWorks photo-realistic rendering application, you need to enter the PhotoWorks serial number, located on the SolidWorks registration form and on the back of the CD-ROM or disable MCD.

9 This option applies only to Windows NT You should enable MCD (Mini-Client Driver) if you are using a graphics card that has Mini-Client Driver support so that SolidWorks can take advantage of the card s ability to accelerate 3D or disallow model changes from drawing. This option makes it possible for a user to make changes to a drawing without having those changes reflected back to the model. (You must reinstall the SolidWorks software to change this option.) The default, and most usual configuration is to allow model changes when the drawing is changed.

10 Installing the SolidWorks SoftwareThe installation steps for an individual user , a server, or a client/server installation are the same. The answers to the questions asked during the installation may differ. For instance, a serial number is not required for a computer that is used exclusively as a server. To install the SolidWorks software for Windows 95 or Windows NT :1 Insert the CD-ROM in the a few seconds the install wizard will begin the installation and Guide you through the few questions that you have answer.