Example: tourism industry

SP fuse carriers - Klinkmann

SP fuse carriers SP fuse carriers with protected terminals with protected terminals n Choice of equipment Maximum cartridge rating Type Rated current 400 V 500 V 690 V . gG aM gG aM gG aM. SP 51 50 A 50 50 50 40 25 25. SP 58 100 A 125 125 100 100 50 50. (125 A in 400 V) These values are standardized according to IEC 60269-2/2-1. They can be reduced or increased under certain specific applications Index of protection: IP 2X - IP 2XC - under front plate Equipment derating Recommended for equipment exposed to high temperatures: 215 36 216 01 Ambient temperature over 35 C: derate fuse by one rating per 10 C. (UTE C 20-051 / IEC 60943). Conform to IEC 60269-2 Side-by-side equipment and simultaneous function Veritas approved Height under front plate 44 mm 2 - 3 devices x ln Mixed socket screw head for easier cable clamping 4 - 5 devices x ln Screw or rail 3 and 1 mounting 6 - 7 - 8 - 9 devices x ln 10 devices x ln Pack SP 51 for HRC fuses 14 x 51.

cex-EP3 118 SP fuse carriers with protected terminals SP fuse carriers with protected terminals 215 36 216 01 Conform to IEC 60269-2 Veritas approved

Tags:

  Carrier, Fuse, Sp fuse carriers

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of SP fuse carriers - Klinkmann

1 SP fuse carriers SP fuse carriers with protected terminals with protected terminals n Choice of equipment Maximum cartridge rating Type Rated current 400 V 500 V 690 V . gG aM gG aM gG aM. SP 51 50 A 50 50 50 40 25 25. SP 58 100 A 125 125 100 100 50 50. (125 A in 400 V) These values are standardized according to IEC 60269-2/2-1. They can be reduced or increased under certain specific applications Index of protection: IP 2X - IP 2XC - under front plate Equipment derating Recommended for equipment exposed to high temperatures: 215 36 216 01 Ambient temperature over 35 C: derate fuse by one rating per 10 C. (UTE C 20-051 / IEC 60943). Conform to IEC 60269-2 Side-by-side equipment and simultaneous function Veritas approved Height under front plate 44 mm 2 - 3 devices x ln Mixed socket screw head for easier cable clamping 4 - 5 devices x ln Screw or rail 3 and 1 mounting 6 - 7 - 8 - 9 devices x ln 10 devices x ln Pack SP 51 for HRC fuses 14 x 51.

2 No of This coefficient is to be applied on the nominal rating of the base Without microswitch (IEC 60439-1). Connection modules 5 215 01 1P 1 x 35 mm2 Uninterrupted usage: it may be necessary to upgrade the bases by 1 215 03 2P or 3 one size 1 215 04 3P 2 x 16 mm2 1 215 05 3P + equipped neutral 6. With 5 A - 250 V changeover micro-switch Cartridge presence, prebreak and device against n Dimensions (mm). single-phase operation J. 1 x 35 mm2 H. 1 215 36 3P or V. G 2 x 16 mm2 SP 58 for HRC fuses 22 x 58 C. C. B2. B2. Without microswitch No of Connection A. A. modules 3 216 01 1P 1 x 50 mm2 2. 1 216 04 3P or 6. B1. B1. B. 1 216 05 3P + equipped neutral 2 x 25 mm2 8. B. With 5 A - 250 V changeover micro-switch Cartridge presence, prebreak and device against 44 L L U.

3 Single-phase operation E N V. 1 x 50 mm2 W. 1 216 36 3P or 6. 2 x 25 mm2 A B B1 B 2 C E G H J. 1P 2P/3P 1P. Link handle SP 51 106 45 35 55 53 81 84 96. SP 58 140 74 65 45 66 59 53 87 90 111. 5 216 96 For SP 51 or SP 58. Length 300 mm, can be cut to required J L N U V W length 2P 3P 4P 1P 2P 3P 4P 1P 2P/3P. SP 51 99 9 53 53 106 87 90. SP 58 114 27 9 36 72 108 36 72 108 144 101 109. Spacing unit (p. 179). 118. SPX and SPX-V. selection chart SPX blade type isolators (p. 120). Mounting on plate Size Type Nominal current In (blade type cartridge fuses). SPX 000 125-3P 6052 00 125 A 000 (OOC). SPX 00 160-3P 6052 02 160 A 00. SPX 1 250-3P 6052 04 250 A 1. SPX 2 400-3P 6052 06 400 A 2. SPX 3 630-3P 6052 08 630 A 3.

4 Mounting on 60 mm collector rail SPX 000 125-3P 6052 01 125 A 000 (OOC). SPX 00 160-3P 6052 03 160 A 00. SPX 1 250-3P 6052 05 250 A 1. SPX 2 400-3P 6052 07 400 A 2. SPX 3 630-3P 6052 09 630 A 3. SPX-V isolators with vertical blades (p. 122). Mounting on collector rail support Size Type Nominal current In (blade type cartridge fuses). SPX-V 00 160-3P 6052 14 160 A - 60 mm rail 00. SPX-V 00 160-3P(1) 6052 10 160 A - 100 mm rail 00. SPX-V 1 250-3P 6052 11 250 A - 185 mm rail 1. SPX-V 2 400-3P 6052 12 400 A - 185 mm rail 2. SPX-V 3 630-3P 6052 13 630 A - 185 mm rail 3. (1) Isolators SPX-V 00 160 can be mounted on 185 mm collector rail by adding the 6052 50 (single) or 6052 51 (double) adaptators Red catalogue numbers : New products 119.

5 SPX AND SPX-V >>> SPX. isolators with blade type cartridge fuses, for DIN rail plate or 60 mm distance collector rail Protection plus on-load breaking 6052 00 6052 02 6052 04 6052 06 6052 08. fuse carriers for blade type fuses, designed to protect against short-circuits and overloads, connect and disconnect electric circuit parts without load or at full load. 6052 46 6052 01 6052 05 6052 07. Accessories (p. 121). Technical characteristics (p. 123). Dimensions (p. 125-126). Pack SPX blade type isolators Conform to standard IEC/EN 60947-3. enables safe handling while energised protection against accidental contact fuse can be checked through transparent window voltage control via small opening in window sealable cover simultaneous switching on all poles, 1600 mechanical operations cover position indicated by auxiliary contact (accessory).

6 Screw connection for lug interchangeable connection accessories 4 types of connection possible: flush-mounted terminals (SPX 000). with lugs (SPX 00-3). flat connections (included with the SPX 000, as an accessory for SPX 00-3). prism connections (as accessory for SPX 00-3). Mounting: on plate on DIN rail on 60 mm collector rail: on 5 or 10 mm thick rails for models SPX 000, SPX 00. on 10 mm rails for models SPX 1, SPX 2, SPX 3. with installation kit 6052 48 for models SPX 1 and SPX 2, mounting on 5 mm SPX-V fuse carrier SPX fuse carrier thick rails possible Interchangeable outgoing line, via top or bottom The blade type fuses are available separately fuse carriers in two versions: Mounting Mounting Nominal Size Connection - SPX in-line fuse carriers on plate on collector current rail In - SPX-V vertical fuse carriers 1 6052 00 6052 01 125 A 000 Connection cr-sect.

7 Mm2. Allow maintain switching selectivity 1. 1. 6052 02. 6052 04. 6052 03. 6052 05. 160 A. 250 A. 00. 1. With M8 sleeve With M10 sleeve Two connection systems: terminals 1. 1. 6052 06. 6052 08. 6052 07. 6052 09. 400 A. 630 A. 2. 3. With M10 sleeve With M12 sleeve or collector rail Blade type cartridge fuses (p. 134). XL3 mounting accessories (p. 203, 219 and 233). These products are part of protection and distribution systems > See p. 44-45. Red catalogue numbers : New products 120. SPX and SPX-V accessories 6052 18 6052 23 6052 26 6052 49 6052 79 6052 69 6052 65 6052 30 6052 36. 6052 45 6052 46. Dimensions (p. 126). Pack Cage terminals for SPX and SPX-V Pack Connection terminals to feed the bars, for SPX and SPX-V (continued).

8 Flat terminals for flexible copper rail Conductor: flexible or rigid multicore copper cables Universal connection terminals for flexible copper Cross-section rail Conductor Flexible rail SPX size (mm2) (mm) Conductor: flexible or rigid multicore copper and 3 6052 18 12 x 10 00 aluminium cables 3 6052 19 70-150 18 x 7-18 1 Conductor Bar thickness In (mm) (mm) (A). 3 6052 20 120-240 21 x 5-19 2. 3 6052 21 150-300 25 x 7-20 3 100 6052 63 5 180. 50 6052 64 4-35 5 270. Prism terminals for flexible copper rail 25 6052 65 16-70 10 400. Conductor: flexible or rigid multicore copper and 25 6052 66 16-120 10 440. aluminium cables Cross-section Conductor Flexible rail SPX size Signalling contact for SPX and SPX-V.

9 (mm2) (mm). 3 6052 22 16-70 12 x 8 00 To indicate the status of the cover 3 6052 23 70-150 18 x 10 1. 3 6052 24 120-240 21 x 15 2 1 6052 30 Changeover contact SPX size 3 6052 25 150-300 25 x 20 3 5 A 250 V AC; 4 A 30 V DC 000, 00, 1, 2, 3. Extension connector with 3 inputs Lockable faceplate for SPX. Fix with M8 screws SPX size In closed position, the cover can be locked 3 6052 26 3 inputs 00 For 4-7 mm padlocks for mm2 wires SPX size Terminals shields 10 6052 35 000. Fix at top or bottom of isolator 10 6052 36 00. Output SPX size 10 6052 37 1, 2, 3. 2 6052 49 With installation plate 00. 1 6052 31 With collector rail 00 Kit for fixing on TH 35 for SPX. 1 6052 32 For all types 1. 1 6052 33 For all types 2 SPX size 1 6052 34 For all types 3 1 6052 45 For 1 isolator 000.

10 Connection terminals to feed the bars, Collector rail supports for 60 mm phase for SPX and SPX-V offset Collector rail system: 60, 100 and 185 mm Isolating support for 12, 15, 20, 25, 30 x 510 mm flat rigid copper rails Prism terminals for longitudinal feed For installing SPX isolators on 60 mm collector rail For flexible copper rail Can be installed in XL3 400/800/4000 distribution Conductor: flexible or rigid multicore copper and using vertical adaptors for uprights aluminium cables Tightening torque: Md = 4 Nm Cross-section The internal strengthening uprights provide the Conductor Bar (mm2) (mm) necessary support 3 6052 78 70-150 15 x 5 Maximum temperature: Tmax = 120 C. 3 6052 79 120-240 20 x 5 SPX size 3 6052 80 150-300 25 x 5 10 6052 46 3P 000, 00, 1, 2, 3.


Related search queries