Example: confidence

SPECIFICATION OF PRODUCT

- samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. SPECIFICATION OF PRODUCT Lithium-ion rechargeable cell for power tools Model name : INR21700-40T December, 2017 samsung SDI Co., Ltd. Energy Business Division - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 1/20 - Scope This PRODUCT SPECIFICATION has been prepared to specify the rechargeable lithium-ion cell ('cell') to be supplied to Customer by samsung SDI Co., Ltd. Description and model Description lithium-ion rechargeable cell Model name INR21700-40T Site Manufactured in Korea Nominal specifications (*1) Item SPECIFICATION Standard discharge capacity Min.

-SAMSUNG SDI Confidential Proprietary – Spec. No. INR21700-40T Version No. 0.0 - 1 /20 - 1.0. Scope This product specification has been prepared to specify the rechargeable lithium-ion cell ('cell') to be supplied to Customer by Samsung SDI Co., Ltd. 2.0. Description and model 2.1 Description lithium-ion rechargeable cell

Tags:

  Samsung, Proprietary

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of SPECIFICATION OF PRODUCT

1 - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. SPECIFICATION OF PRODUCT Lithium-ion rechargeable cell for power tools Model name : INR21700-40T December, 2017 samsung SDI Co., Ltd. Energy Business Division - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 1/20 - Scope This PRODUCT SPECIFICATION has been prepared to specify the rechargeable lithium-ion cell ('cell') to be supplied to Customer by samsung SDI Co., Ltd. Description and model Description lithium-ion rechargeable cell Model name INR21700-40T Site Manufactured in Korea Nominal specifications (*1) Item SPECIFICATION Standard discharge capacity Min.

2 4,000mAh - Charge: (2A), , (200mA) cut-off @ RT - Discharge: (800mA), cut-off @ RT Rated discharge capacity Min. 3,900 mAh - (6A), , (100mA)cut-off @RT - Discharge: 10A, cut-off @ RT Nominal voltage Standard charge CCCV, 2A, V, 200mA cut-off Rated charge CCCV, 6A, V, 100mA cut-off Charging time Standard charge : 180min / 200mA cut-off(@ RT) Rated charge: 70min / 100mA cut-off(@ RT) Max. continuous discharge (Surface temperature) 35A(Without temperature cut) 45A(With 80 C temperature cut) Discharge cut-off voltage (End of discharge) Cycle life Capacity 2,400mAh @ after 250cycles (60% of the standard capacity @ RT) - Charge : 6A, , CCCV 100mA cut-off @ RT - Discharge: 35A , cut-off @ RT Retention characteristics Capacity recovery(after the storage) 3,510 mAh (90% of the rated capacity @ RT) - Charge : 6A, , CCCV 100mA cut-off @ RT - Storage : 30 days (@ 60 C) - Discharge : 10A , cut-off @ RT Cell weight max Cell dimension Height : Max Diameter : Max - samsung SDI Confidential proprietary Spec.

3 No. INR21700-40T Version No. - 2/20 - Operating temperature (Ambient) Charge : 0 to 45 C Discharge: -20 to 60 C Operating temperature(*2) (Surface) Charge : 0 to 50 C (recommended recharge release < 45 C) Discharge: -20 to 80 C (must re-discharge release < 60 C) Storage temperature(*3) (Recovery 90% after storage) 1 year 0~25 C 3 months 0~45 C 1 month 0~60 C Note (* ): Protection function of the battery pack should be set within the specified charge, discharge and temperature range in the Cell SPECIFICATION . Note (* ): Discharge OTP(over temp. protection) should not be over 80 C of the cell surface temperature.

4 Protection set should be based on the location of the cell surface with the highest temp increase part of the battery pack. Note (* ): If the cell is kept as ex-factory status (30% of charge), the capacity recovery rate is more than 90%. - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 3/20 - Outline dimensions See the attachment (Fig. 1) Max Outline dimensions of INR21700-40T Max Unit : mm With tube - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 4/20 - Appearance There shall be no such defects as scratch, rust, discoloration, leakage which may adversely affect commercial value of the cell.

5 Standard test conditions Environmental conditions Unless otherwise specified, all tests stated in this SPECIFICATION are conducted at temperature 23 3 and humidity under 65%. Measuring equipment (1) Amp-meter and volt-meter The amp-meter and volt-meter should have an accuracy of the grade and mV or higher. (2) Slide caliper The slide caliper should have mm scale. (3) Impedance meter The impedance meter with AC 1kHz should be used. Characteristics Standard charge This " Standard charge" means charging the cell CCCV with charge current (2,000mA), constant voltage and 200mA cut-off in CV mode at 23 C for capacity.

6 Rated charge Rated charge means charging the cell CCCV with charge current 6A and 100mA cut-off at 23 C Standard discharge capacity The Standard discharge capacity is the initial discharge capacity of the cell, which is measured with discharge current of 800mA( ) with cut-off at 23 C within 1hour after the Standard charge. Standard discharge capacity 4,000mAh Which complying to the minimum capacity of IEC61960 standard - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 5/20 - Rated discharge capacity The rated discharge is the discharge capacity of the cell, which is measured with discharge current of 10A with cut-off at 23 C within 1hour after the rated charge.

7 Rated discharge capacity 3,900mAh Initial internal impedance Initial internal impedance measured at AC 1kHz after Rated charge Initial internal impedance 12m Temperature dependence of discharge capacity Capacity comparison at each temperature, measured with discharge constant current 10A and cut-off after the rated charge is as follows. Discharge temperature -20 C -10 C 0 C 23 C 60 C 60% 75% 80% 100% 95% Note: If charge temperature and discharge temperature is not the same, the interval for temperature change is 3 hours. Percentage index of the discharge at 23 C at 10A (=3,900mAh) is 100%.

8 Temperature dependence of charge capacity Capacity comparison at each temperature, measured with discharge constant current 10A and cut-off after the rated charge is as follows. Note: If charge temperature and discharge temperature is not the same, the interval for temperature change is 3 hours. Percentage as an index of the rated discharge at 23 C at 10A (=3,900mAh) is 100%. Charge temperature Discharge temperature 0 C 5 C 23 C 45 C 50 C 23 C Relative capacity 80% 90% 100% 95% 95% - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 6/20 - Charge rate capabilities Discharge capacity is measured with constant current 10A and cut-off after the cell is charged with as follows.

9 Note: Percentage index of the discharge at 23 C at 10A (=3,900mAh) is 100%. Discharge rate capabilities Discharge capacity is measured with the various currents in under table and cut-off after the rated charge. Note: Percentage index of the discharge at 23 C at 10A (=3,900mAh) is 100%. Cycle life With rated charge and maximum continuous discharge. Capacity after 250cycles, - Charge : 6A, , 100mA cutoff - Discharge : 35A, cut off Capacity 2,400mAh (60% of the standard capacity at 25 C) Retention characteristics Capacity after storage for 30 days at 60 C from the rated charge, Measured with discharge current 10A with cut-off at 23 C Capacity recovery(after the storage) 3,510 mAh (90% of the rated capacity at 23 C) Status of the cell as of ex-factory The cell should be shipped in to charging voltage range.

10 Charge condition Current Standard Rated 6A Cut-off 200mA 100mA Relative Capacity 100% 100% Discharge condition Current 10A 20A 30A 40A Relative Capacity 100% 95% 93% 90% - samsung SDI Confidential proprietary Spec. No. INR21700-40T Version No. - 7/20 - Mechanical Characteristics Drop test Test method: Fully rated charged Cells drop onto the concrete floor from height at a random direction 3 times. The cells or batteries are dropped so as to obtain impacts in random orientations. After the test, the sample shall be put on rest for a minimum of one hour and then a visual inspection shall be performed.


Related search queries