Specification Sheet

Tyre Front: 90/100 10 , Rear 10 Motor KW nominal and KW Peak BLDC Motor Controller 60V 20 Tube Vector Looped Battery 60V KWh Portable Battery Casing Metallic Cells NMC 18650 3C Ultra Performance BMS Smart Active Balance 50A Charger Output CC-CV Portable 10A External Charging Port Yes Brake Disc (F) & Drum (R) Regenerative Braking Yes Display cm MF LED Rim Cast Alloy Head Lamp LED Reflector Yes Blinkers Rear and Front : Left/ Right Blinkers Brake Lights Included Mudguards Alloy: Rear and Front Seat Comfortable Seating for 2 PAX Throttle Twist Throttle Gradeability 12 degree Storage Limited Space Security Anti-theft Smart Lock Ladies Footrest Yes Specification Sheet

Tyre Front: 90/100—10 , Rear 3.00—10 Motor 1.5 KW nominal and 2.2 KW Peak LD Motor ontroller 60V 20 Tube Vector Looped attery 60V 2.5 KWh Portable attery asing Metallic ells NM 18650 3 Ultra Performance MS Smart Active alance 50A harger Output - V Portable 67.2V 10A External harging Port Yes rake Disc (F) & Drum (R)

Information

Documents from same domain

Specification Sheet

pureevwebsite.s3.ap-south-1.amazonaws.com

attery asing Metallic ells NM 18650 3 Ultra Performance MS Smart Active alance 50A harger Output - V Portable 67.2V 10A External harging Port Yes rake Disc (F) & Drum (R) Regenerative raking Yes Display 4 Inch LD Display Rim ast Alloy Head Lamp LED Reflector Yes linkers Rear and Front : Left/ Right linkers

  Asing

Related documents

Gaugeable Alloy 2507 Super Duplex Tube Fittings (MS-01 …

www.swagelok.com

Pressure ratings based on special wall thickness tolerance for Swagelok Alloy 2507 tubing. Pressure Ratings for Swagelok Alloy 2507 Tube Fittings Used with Alloy 2507 Tubing Male NPT End Connections Male NPT pipe end connections up to 1/2 in. are rated to 15 000 psig (1040 bar); sizes over 1/2 in. are rated to 10 000 psig (690 bar).

  Alloys, Swagelok, Swagelok alloy

Heat Treatment of Plain Carbon and Low­Alloy Steels ...

ocw.mit.edu

Plain Carbon and Low­Alloy Steels: Effects on Macroscopic Mechanical Properties. 1 Background and Objectives Iron is one of the oldest known metals, and carbon is the cheapest and most effective alloying element for hardening …

  Treatment, Heat, Alloys, Heat treatment

Inconel alloy 718 (Sept 07) Web - Special Metals Corporation

www.specialmetals.com

400 28.5 10.9 0.31 500 28.0 10.6 0.32 INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. Typical composition limits are shown in Table 1. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics,

  Alloys, Inconel, Inconel alloy 718, 174 alloy 718

CATALOG Blackburn® Mechanical connectors

library.e.abb.com

10 Type ASL — 11 Type ASR — 12 Type BX ... bronze alloy • Pressure bar is copper through 40H, copper alloy for 350 kcmil and above • Bolt and nut of hex design up to 350 kcmil • Tested and listed to UL486C, UL467 for grounding and for direct burial through Cat. No. 40H Cat. no.

  Alloys

TITANIUM ALLOY GUIDE - spacematdb.com

www.spacematdb.com

Atomic Volume 10.64 cm 3/mol Covalent Radius 1.32Å Color Dark Grey Hardness 70 to 74 BHN Coefficient of Thermal Expansion 8.4 x 10-6/˚C Electrical Resistivity 42 µohm-cm Thermal Conductivity 20 W/m•˚K Heat of Fusion 292 kJ/kg Heat of Vaporization 9.83 MJ/kg Specific Heat 518 J/kg ˚K Magnetic Susceptibility 3.17 x 10-6 cm3/g Magnetic ...

  Alloys

Division 7 Drainage Structures, Storm Sewers, Sanitary ...

www.wsdot.wa.gov

steel, corrugated aluminum alloy, polyvinyl chloride (PVC), or corrugated polyethylene (PE) at the option of the Contractor unless the Plans specify the type to be used. Page 7-2 2022 Standard Specifications M 41-10

  Division, Structure, Storm, Sewer, Sanitary, Drainage, Storm sewer, Alloys, Division 7 drainage structures

Related search queries