Specifications for NTC Thermistor - TME

1 Specifications for NTC Thermistor Part No. MF52B2 104F3950 Operating criteria Q/320115 SHD03-2008 1 Dimensions(mm) 2 Materials Coating Lead wire Material Color Material Color Epoxy Resin Black Enamelled Cu wire Yellow 3 Ordering information MF52 B2 104 F 3950 Resistance Tolerance B-value 25/50 Pearl-Shape Temp

2 Measurement NTC Thermistor Enamelled cu wire 10 104=100K 1% 3950K 4 Electrical characteristics Item Symbol Test conditions Unit specification Zero Power Resistance at 25 C R25 Ta=25 C Test Power Test in fluid liquid K 100 1% B-value B25/50 B=[(Ta Tb)/(Tb-Ta)] ln(Ra/Rb)Tb=50 C C K 3950 1% Thermal dissipation Coefficient In still air mW/ C 2 Thermal time constant In still air sec 7 Insulation resistance / 100V/DC

3 1min M 100 Operating temperature / / C -55 ~ 125 R&T-table / / / See attached table Resistance tolerance / / / See attached curve 5 Reliability Item Test conditions and methods Technical requirements Solderability The lead wire shall be dipped into solder bath of 235 5 for 2 C~3sec with 6mm space from the body.

4 Solder dipped on lead wire should be uniform and smooth; the coverage area should be more than 95%. Withstand Soldering heat The lead wire shall be dipped into solder bath of 265 5 for C5 1sec with 6mm space from the body. No obvious damage, R25 R/R 2% Terminal strength Pull strength 5N time 10sec No obvious damage, R25 R/R 2% Temperature cycle -55 C30min 25 C5min 125 C30min 25 C5min 5cycles ,recover 4hrs No obvious damage, R25 R/R 2% High temperature Temperature 125 C time 16hrs No obvious damage, R25 R/R 2% Low temperature Temperature -55 C Time 2hrs No obvious damage, R25 R/R 2% Low atmospheric pressure Atmospheric pressure 40 time.

5 4hrs No obvious damage, R25 R/R 2% Steady humidity and heat Te mp 40 C humidity 93% Time 500 12hrs No obvious damage, R25 R/R 2% Withstanding voltage 700V/AC 1minInsulating resistance 100M Damp heat Te mp 25~40 C humidity 90% Time 24hrs No obvious damage, R25 R/R 2% Withstanding voltage 700V/AC 1minInsulating resistance 100M Zero power endurance at upper category temperature Temp : 125 C 2 C, Time :1000 24hrs No obvious damage, R25 R/R 2% Vibrate Frequency 10~500HZ swing or 98m/S2 time :2hurs No obvious damage, R25 R/R 2% Bump Acceleration 250m/S2 pulse duration 6mS Bump times 4000times No obvious damage, R25 R/R 2% 6 Soldering conditions When soldering, space between iron tip and Thermistor body must be more than 10mm, temperature should be less than 350 C, soldering time should be as short as possible.

6 7 Storage conditions Storage temp -10 C 40 C Storage humidity 75% RH Avoid air corrosion or sunlight Remake sealed storage after package opening. 8. Certificate Quality Control System Certification ISO9001 2000 01110Q20002R3M Environment Management System Certification ISO14001 2004 01110E20031R1M Environment Test Report RoHS RLSHF001439940001 Environment Test Report REACH (RLSHD000712710001C) CQC Certificat ion (CQC07001019009)

7 The Hi&Tech Product of Jiangsu Province (070115G0058N) R&T Table R25=100K TOLERANCE: 1% B25/50=3950K TOLERANCE: 1% (P209-15A) TEMP( C) RESISTANCE(K ) RESISST-TOL(%) TEMP-TOL( C) MIN CENTER MAX R - R T - T -55 -54 -53 -52 -51 -50 -49 -48 -47 -46 -45 -44 -43 -42 -41

8 -40 -39 -38 -37 -36 -35 -34 -33 -32 -31 -30 -29 -28 -27 -26 -25 -24 -23 -22 -21 -20 -19 -18 -17 -16 -15 -14 -13 -12

9 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

10 19 20 21 22 23 24