Example: stock market

SSV Metering Devices - Lincoln Industrial

:351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 36 SSV Metering DevicesMulti-line and Progressive Systems SSV Metering Devices SSV progressive Metering de- vices are piston-type Metering Devices which reliably dispense the lubricant volume fed to the inlet in predetermined single quantities. By closing one outlet, the lubri- cant is fed to the next outlet below. This combining of outlets provides a large variety of me- tering possibilities. Additionally the internal porting avoids cum- bersome external T-fittings. A special feature of the progressive Metering device is that a pre- vious feed line must supply lubri- cant before the next one can be supplied. This makes the pro- gressive system easy to visually or electrically monitor. It is avail- able with 6 to 22 outlets and can be used for greases up to NLGI 2 or oils of at least 40 mm /s.

single-block technology. • Metering screws can be pre-assembled or supplied as a separate set. • Metering screws per outlet pair are aviable in 10 sizes 0.08 cm , 0.14 cm , 0.2 cm 0.3 cm , 0.4 cm , 0.6 cm 0.8 cm , 1.0 cm , 1.4 cm , and 1.8 cm per outlet and stroke. Standard with …

Tags:

  Devices, Technology, Metering, Ssv metering devices

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of SSV Metering Devices - Lincoln Industrial

1 :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 36 SSV Metering DevicesMulti-line and Progressive Systems SSV Metering Devices SSV progressive Metering de- vices are piston-type Metering Devices which reliably dispense the lubricant volume fed to the inlet in predetermined single quantities. By closing one outlet, the lubri- cant is fed to the next outlet below. This combining of outlets provides a large variety of me- tering possibilities. Additionally the internal porting avoids cum- bersome external T-fittings. A special feature of the progressive Metering device is that a pre- vious feed line must supply lubri- cant before the next one can be supplied. This makes the pro- gressive system easy to visually or electrically monitor. It is avail- able with 6 to 22 outlets and can be used for greases up to NLGI 2 or oils of at least 40 mm /s.

2 Lincoln progressive Metering de- vices in block design have no defect-prone rubber seals. They can therefore be used with no problem at high differential pres- sure (up to 100 bar between two outlets) and for a wide range of temperatures. The maximum operating pressure is 350 bar. Advantages No rubber seals Single block design Internal combining of outlets Exact lubricant Metering Easy to monitor Fault-free replacement: should a Metering device be exchanged, connection and output or adjustment errors are avoided High operating pressureValidated Environmental Ifti619-26473-1 Inlet Size: R 1/8" Female (BSPP)Carbon Steel303 StainlessSteel (VA )316Ti StainlessSteel (VA )Number ofOutletsCarbon Steel303 StainlessSteel (VA )Inlet Size: 1/8" NPT Female619-25730-2619-26841-1619-25731-26 19-28862-1619-28863-1619-28864-1619-2886 5-1619-28866-1619-27471-1619-27473-1619- 27475-1619-27477-1619-29063-1619-29064-1 619-29065-1619-29066-1619-27824-1619-278 25-1619-27889-1619-27900-168101214161820 22619-27121-1619-26396-2619-26844-1619-2 6398-2619-27792-1619-27796-1619-27800-16 19-27804-1 :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 37 SSV Metering Devices SSV6-K with Indicator PinIndicator Pin (K)For Visual Monitoring619-26474-3 Inlet Size: R 1/8" Female (BSPP)Carbon Steel303 StainlessSteel (VA )316Ti StainlessSteel (VA )Number ofOutletsCarbon Steel303 StainlessSteel (VA )Inlet Size: 1/8" NPT :351/06/04_Lincoln_Multi_dt 11.

3 04 Uhr Seite 38 SSV-D Metering DevicesSSV8-N with Piston DetectorTechnical DataDimensions SSV with Piston Detector (N) For Electrical Monitoring. Standard Cable Length: 3 m (10 )619-28257-1 Inlet Size: G 1/8" Female (BSPP)Carbon Steel303 StainlessSteel (VA )Number ofOutletsInlet Size: 1/8" NPT Female619-28258-1619-28259-1619-28260-16 19-28890-1619-28907-1619-28957-1619-2893 5-1619-29015-1619-29003-1619-28529-1619- 29004-1619-28653-1619-28654-168101214161 82022number of outletsmaximum operating pressure6 to 22350 bar (5076 psi)metered volume per outletmaximum differential pressure100 bar (1450 psi)outlet threadand per cm ( in )M 10 x 1 (must use Lincoln outlet fittings)materials available steel, surface zinc-iron-coated, black chromed stainless steel ( ) stainless/acid proof steel for SSV6-12 ( )operating temperature-25 to 70 C ( - 13 to 158 F)Piston detector is also available with plug version ask your Lincoln : Never close outlets 1 & 2!

4 No. of OutletsHeight60 mm ( in)6 WidthDepth875 mm ( in)1090 mm ( in)12105 mm ( in)14120 mm ( in)16135 mm ( in)60 mm ( in)30 mm ( in)18150 mm ( in)20165 mm ( in)22180 mm ( in) 3 :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 39 SSV-D with Metering Screws SSVD 12 SSV-D Metering Devices areadjustable per outlet pair. Themetering occurs within themetering block via meteringscrews that are available indifferent sizes. The output of theprogressive Metering device canbe easily changed, even or more outlet pairs of themetering device can be internallycombined to achieve greaterlubricant requirements. The pri-mary function of the SSV re-mains unchanged in the dimensions of the SSV-Dmetering device have beenchanged from the standard SSVin order to allow for the samethread sizes.

5 As a result, bothmetering device types use thesame components such as pistondetector and piston-side SSV-D offers greatermetering range flexibility. TheSSV-D can be integrated intosystems using standard SSVmetering Devices . The adjustable SSV-D Metering Devices are available in the standard sizes from 6 to 22 outlets using Lincoln s single-block technology . Metering screws can be pre- assembled or supplied as a separate set. Metering screws per outlet pair are aviable in 10 sizes cm , cm , cm cm , cm , cm cm , cm , cm , and cm per outlet and stroke. Standard with G 1/8" BSPP inletStandard withpiston detectorMetering device withoutlets 1 & 2 togetherUSAM etering device withoutlets 1 & 2 togetherStandard with1/8" NPT inletUSAS tandard withpiston detectorUSAO ther versions are available on request649-29488-1649-29487-1649-29486-1 649-29485-1 SSVD 6 SSVD 8 SSVD 10 SSVD 12649-29589-1649-29588-1649-29587-1649-2 9489-1 SSVD 14 SSVD 16 SSVD 18 SSVD 20 Part 22649-29498-1649-29497-1649-29496-1649-2 9495-1 SSVD 6/5 SSVD 8/7 SSVD 10/9 SSVD 12/11649-29633-1649-29632-1649-29631-164 9-29544-1 SSVD 14/13 SSVD 16/15 SSVD 18/17 SSVD 20/19 Part 22/21649-29493-1649-29492-1649-29491-164 9-29490-1 SSVD 6/5 SSVD 8/7 SSVD 10/9 SSVD 12/11649-29593-1649-29592-1649-29591-164 9-29494-1 SSVD 14/13 SSVD 16/15 SSVD 18/17 SSVD

6 20/19 Part 22/21649-29538-1649-29537-1649-29536-164 9-29535-1 SSVD 6 SSVD 8 SSVD 10 SSVD 12649-29653-1649-29652-1649-29651-1649-2 9569-1 SSVD 14 SSVD 16 SSVD 18 SSVD 20 Part 22 3 3 3 3 3 3 3 3 3 :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 40 SSVM Metering Devices Check Valve, ThreadedCheck Valve, QuicklincOutlet Closure Plug SSV and SSV-D AccessoriesTechnical DataDimensions ModelLength 70 mmSSVD 6 WidthDepthSSVD 8 80 mmSSVD 10100 mmSSVD 12115 mmSSVD 14130 mmSSVD 16145 mm 60 mm40 mmSSVD 18160 mmSSVD 20175 mmSSVD 22190 mmnumber of outlets inlet thread6 to 22R 1/8 or 1/8 NPTFmax.

7 Differential pressure between two outlets and the inlet100 barmax. starting pressuremax. pressure350 bar20 barpiston closure plug (piston detector)metered volume per outlet and stroke in cm ; ; ; ; ; ; ; ; ; 11 x 1outlet and Metering screw threadM 10 x 1metering ; ; ; ; ; ; ; ; ; FittingsQuicklinc Plug-in FittingsOther504-31705-1504-31709-1504-3 0344-4504-30345-2check valve for 4 mm tubecheck valve for 6 mm tubecheck valve for 4 mm tube stainless steelcheck valve for 6 mm tube stainless steelPart valve for 6 mm tube high pressure(for primary Metering Devices )check valve for 4 mm tube medium pressure(for secondary Metering Devices )Part valve for 6 mm tube medium pressure(for secondary Metering Devices )219-13798-3303-19346-2303-17499- 3outlet closure plug M 10 x 1outlet closure plug M 10 x 1 - stainless steelo-ring for stainless steel closure plug*Part * Only required when closure plug does not seal.

8 351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 41 SSVM Metering DevicesSSVM Metering Devices offer similar benefits as the SSV, but are smaller in size and output. This makes the SSVM ideal for compact applications little space and short distances. They can be monitored visually or electronically depending on the options selected. They are available with 6 to 12 outlets and can be used for grease up to NLGI 2, or oil of at least 40 cSt. SSVM 619-26761-1 Inlet Size:G 1/8" Female (BSPP)Carbon SteelNumber of OutletsInlet Size:1/8" NPT FemaleCarbon Steel619-37044-1619-26846-1619-37049-168 1012619-26764-1619-26650-1619-26848-1619 -26653-1 Standard619-26762-3 Inlet Size:G 1/8" Female (BSPP)Carbon SteelNumber of OutletsInlet Size:1/8" NPT FemaleCarbon Steel619-37045-3619-26847-2619-37050-368 1012619-26765-3619-26651-3619-26849-2619 -26654-3 With Indicator Pin (K)619-27078-1 Inlet Size:G 1/8" Female (BSPP)Carbon SteelNumber of OutletsInlet Size:1/8" NPT FemaleCarbon Steel619-27079-1619-27080-1619-27081-168 1012 With Indicator Pin and Limit Switch (KS) :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 42 SSVM Metering DevicesTechnical DataDimensions 619-27667-1 Inlet Size.

9 G 1/8" Female (BSPP) Carbon SteelNumber of OutletsInlet Size:1/8" NPT FemaleCarbon Steel619-27668-1619-27669-1619-27670-168 1012 With Indicator Pin and Proximity Switch (KN) 619-27663-1 Inlet Size: G 1/8" Female (BSPP) Carbon SteelNumber of OutletsInlet Size:1/8" NPT FemaleCarbon Steel619-27664-1619-27665-1619-27666-168 1012 With Indicator Pin and Adapter for Proximity Switch (KA)number of outletsmaximum operating pressure6 to 12200 bar (2900 psi)metered volume per outletmaximum differential pressure40 bar (580 psi) cm ( in )materials availableoutlet threadM 8 x 1 (must use Lincoln outlet fittings)steel, surface zinc-iron-coated, black chromedoperating temperature-25 to 70 C (-13 to 158 F)No. of mm ( in)6 WidthDepth860 mm ( in) mm ( in)1283 mm ( in)50 mm ( in)25 mm ( in)SSVM Accessoriesthreaded connections 519-31661-1check valve for 4 mm tubeQuicklinc plug-in fittings 226-14091-5check valve for 4 mm tubeother 303-17530-1 209-12464-7outlet closure plug M 8 x 1outlet copper washer for closure plugPart : Never close outlets 1 & 2!

10 3 :351/06/04_Lincoln_Multi_dt 11:04 Uhr Seite 43 SSV-FL SSV Flanged Type Metering DeviceThe SSV-FL is based on the stand- ard SSV, flanged to a manifold block. Ideal for rigorous conditions such as those found in steel plants. This design allows for connections up to mm tubing. Additionally, the Metering Devices can easily be exchanged during maintenance routines without having to disconnect lubricant lines thus saving valuable time. They can be monitored visually (SSV-FL-K) or electronically via a proximity switch (SSV-FL-KN). They are available with 1 to 12 out- lets and can be used for grease up to NGLI 2 or oil of at least 40 cST. SSV-FL8-KNSSV-FL10-KTechnical Informationnumber of outletsmaximum operating pressure1 to 12300 bar (4350 psi)metered volume per outletmaximum differential pressure100 bar (1450 bar)outlet threadand per cm ( in )G 1/4 female (BSPP)inlet threadG 3/8 female (BSPP)materials availablesteel, surface zinc-iron-coated, black chromedoperating temperature-25 to +70 C (-13 to 158 F)ModelsSSV-FL-K619-40646-1 Number of OutletsSSV-FL-KN619-40646-2619-40646-361 9-40646-44321619-40678-4619-40678-3619-4 0678-2619-40678-1619-40646-5619-40646-66 19-40646-7619-40646-88765619-40678-8619- 40678-7619-40678-6619-40678-5619-40646-9 619-40647-1619-40647-2619-40647-31211109 619-40679-3619-40679-2619-40679-1619-406 78-9 3 :351/06/04_Lincoln_Multi_dt 11.


Related search queries