Transcription of Standard for Installing Industrial Lighting Systems
1 Standard for Installing IndustrialLighting SystemsNECA/IESNA 502-2006 Published byNational Electrical Contractors AssociationJointly developed withIlluminating Engineering Societyof North AmericaAMERICAN NATIONAL STANDARDIESNOTICE OF COPYRIGHTThis document is copyrighted by NECAR eproduction of these documents either in hard copy or soft (including posting on the web) is prohibitedwithout copyright permission. For copyright permission to reproduce portions of this document, pleasecontact NECA standards & safety at (301) 657-3110 ext. 546, or send a fax to (301) Electrical Contractors Association3 Bethesda Metro Center, Suite 1100 Bethesda, Maryland 20814(301) 657-3110 Organizations may obtain permission to reproduce a limited number of copies by entering into a licenseagreement.
2 For information, contact:IHS15 Iverness Way EastEnglewood, CO 80112-5704 or call1-800-854-7179 (USA and Canada)(303) 397-7956 (International)inForeword .. and Equipment Included .. and Equipment Excluded ..1 Construction Materials .. and Other Requirements ..2 Installation Practices ..4 , Storing, Protecting and Delivering ..4 Preparation ..4 and Handling Material ..5 with Other Construction ..5 Equipment in Place ..6 Connections ..8 Lighting ..8 Clean-Out ..8 Field Adjustments ..8 Lamping and Accessories ..8 Final Cleaning and Completion of Luminaire Installation ..8 Testing ..9 Burn-In .. Clean-Up .. Lighting Walk-Through .. Adjustments.
3 Spare Parts .. List .. Discharge (HID) Lighting Systems ..10 Using Conventional Construction .. Using Industrial Lighting Track or Structural Wireways .. Lighting Systems ..12 .. Luminaires .. Mounted Luminaires .. Industrial Lighting Systems ..14 Table of Luminaires ..14 Luminaires ..14 Lighting ..14 Annex A: Stroboscopic Effects ..16 Annex B: Reference standards ..18 NECA/IESNA 502 Standard for Installing Industrial Lighting Products and Equipment IncludedThis Standard describes installation procedures forlighting Systems commonly used in Industrial andstorage buildings, including, but not limited to, thefollowing:a) High intensity discharge (HID) low-bay and high-bay Lighting ) Fluorescent strip lights and general purposeindustrial overhead Lighting ) Common special-purpose and special-environ-ment Industrial ) Lighting installed on Industrial wireway and tracklighting Products and Equipment ExcludedWhile this Standard generally covers most industriallighting Systems , the following are specifically exclud-ed.
4 A) Recessed and surface mounted indoor commerciallighting Systems covered by NECA/IESNA 500-2006(ANSI).b) Lighting Systems designed for hazardous (classi-fied) locations, as defined by NEC Article 500, inwhich special equipment listings or ratings ) Lighting Systems designed for manufacturing cleanrooms, food preparation areas, and other ) Portable Related Construction MaterialsIn addition to the luminaire(s) proper, this standardincludes related construction materials, includinglamps, conduit, wire, various special screws and clips,structural suspension components, and other relatedcomponents and Regulatory and Other Requirementsa) All information in this publication is intended toconform to the National Electrical Code (ANSI/NFPA 70).
5 It is recommended that all work be per-formed in accordance with NFPA 70E, Standard forElectrical safety in the shouldalways follow the NEC, applicable state and localcodes, manufacturer s instructions, and contract doc-uments when Installing Industrial Lighting ) Only qualified persons familiar with the con-struction and installation of Industrial Lighting sys-tems should perform the work described in this ) General requirements for Installing electricalproducts and Systems are described in NECA 1, Standard for Good Workmanship in ElectricalContracting (ANSI). Other National ElectricalInstallation standards provide additional guidance forinstalling particular types of electrical products andsystems.
6 A complete list ofNEISis provided inAnnex Sco
