Standard LED

1 Standard LEDRed Emitting ColourPage <1>18/10/11 : High intensity Standard T-1 3/4 diameter package General purpose leads Reliable and ruggedPackage Dimensions:Dimensions : Millimetres (Inches)Chip MaterialLens ColourSource ColourPart NumberAlGaAsDiffusedRedMV5754 ASpecification TableNotes:1. Tolerance is mm ( ) unless otherwise noted2. Protruded resin under flange is 1 mm ( ) maximum3. Lead spacing is measured where the leads emerge from the packageStandard LEDRed Emitting ColourPage <2>18/10/11 Dissipation80mWPeak Forward Current(1/10 Duty Cycle, ms Pulse Width)100mAContinuous Forward Current20 Derating Linear From 50 / CReverse Voltage5 VOperating Temperature Range-25 C to +80 CStorage Temperature Range-40 C to +100 CLead Soldering Temperature(4 mm ( ) Inches from Body)

2 260 C for 5 sAbsolute Maximum Ratings at Ta= 25 CParameterSymbolMinimumTypicalMaximumUni tTest ConditionLuminous IntensityIv40mcdIf= 20 mA (Note 1)Viewing Angle2 1/225 Deg(Note 2)Peak Emission Wavelength p640nmIf= 20 mADominant Wavelength d635nmIf= 20 mA (Note 3)Spectral Line Half-Width 25nmIf= 20 mAForward 20 mAReverse CurrentIR--100 AVR= 5 VElectrical Optical Characteristics at Ta= 25 CNotes:1. Luminous intensity is measured with a light sensor and filter combination that approximates theCIE eye-response curve2. 1/2is the off-axis angle at which the luminous intensity is half the axial luminous intensity3.

3 The dominant wavelength ( d) is derived from the CIE chromaticity diagram and represents thesingle wavelength which defines the colour of the deviceStandard LEDRed Emitting ColourPage <3>18/10/11 Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use ofit other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted.

4 The Information is subject to change without notice and replacesall data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any usemade of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)is excluded.

5 This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc CharacteristicsForward Voltage VF(V)IF- VF(Ta= 25 C)Forward Current IF(mA)Forward Current IF(mA)Relative Luminous Intensity - IF(Ta= 25 C)Relative Luminous IntensityWavelength (nm)Wavelength Characteristics (Ta= 25 C)Relative Luminous IntensityAmbient Temperature Ta( C)Relative Luminous Intensity - TaRelative Luminous IntensityIF - TaForward Current IF(mA)Ambient Temperature Ta ( C)Directive Characteristics (Ta = 25 C)