STIHL FS 130

1 { STIHL FS 130 WARNINGRead Instruction Manual thoroughly before use and follow all safety precautions improper use can cause serious or fatal de usar la m quina lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones el uso incorrecto puede causar lesiones graves o ManualManual de instruccionesInstruction Manual1 - 53 Manual de instrucciones54 - 111 Original Instruction ManualPrinted on chlorine-free paperPrinting inks contain vegetable oils, paper can be recycled. ANDREAS STIHL AG & Co. KG, 20160458-258-8621-D. 0000000683_016_GBFS 130, FS 130 REnglish1{This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic only persons who fully understand this manual to operate your trimmer / receive maximum performance and satisfaction from your STIHL trimmer / brushcutter, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your trimmer / brushcutter.}}

2 For further information you can go to your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this a trimmer / brushcutter is a high-speed cutting tool some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal sure your unit is equipped with the proper deflector, handle and harness for the type of cutting attachment being used. Always wear proper eye to Using this Manual2 Safety Precautions and Working Techniques3 Approved Combinations of Cutting Attachment, Deflector, Handle and Harness17 Approved Power Tool Attachments 19 Mounting the Bike Handle19 Mounting the Loop Handle21 Adjusting the Throttle Cable22 Fitting the Carrying Ring23 Mounting the Deflector23 Mounting the Cutting Attachment 24 Fuel27 Fueling28 Fitting the Harness29 Balancing the Machine29 Starting / Stopping the Engine31 Transporting the Unit33 Operating Instructions35 Cleaning the Air Filter36 Engine Management36 Adjusting the Carburetor36 Spark Arresting Screen in Muffler 37 Spark Plug37 Engine Running Behavior38 Lubricating the Gearbox39 Storing the Machine39 Sharpening Metal Cutting Blades 39 Maintaining the Mowing Head40 Inspections and Maintenance by Dealer41

3 Maintenance and Care42 Main Parts44 Specifications46 Maintenance and Repairs47 Disposal48 STIHL Incorporated Federal Emission Control Warranty Statement48 STIHL Incorporated California Exhaust and Evaporative Emissions Control Warranty Statement50 Trademarks52FS 130, FS 130 REnglish2 PictogramsThe meanings of the pictograms attached to or embossed on the machine are explained in this on the model concerned, the following pictograms may be on your in TextMany operating and safety instructions are supported by individual steps or procedures described in the manual may be marked in different ways:NA bullet marks a step or description of a step or procedure that refers directly to an illustration may contain item numbers that appear in the illustration.

4 Example:NLoosen the screw (1).NLever (2) ..In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols and signal words described below:DANGERI ndicates an imminent risk of severe or fatal a hazardous situation which, if not avoided, could result in severe or fatal a risk of property damage, including damage to the machine or its individual ImprovementsSTIHL s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications and improvements may not be covered in this manual.

5 If the operating characteristics or the appearance of your machine differs from those described in this manual, please contact your STIHL dealer or the STIHL distributor for your area for to Using this ManualFuel tank for gasoline and engine oil mixturePress to operate decom-pression valveManual fuel pumpPress to operate manual fuel pumpFiller hole for gear lubricantAir intake summer modeAir intake winter modeHandle heatingFS 130, FS 130 REnglish3 The terminology utilized in this manual when referring to the power tool reflects the fact that different types of cutting attachments may be mounted on it. The term " trimmer " is used to designate an FS unit that is equipped with a nylon line head or a head with flexible plastic blades ( , the PolyCut head).

6 A "brushcutter" designates a unit equipped with a rigid metal blade. Many FS models may be used as either a trimmer or a brushcutter therefore, the power tool is referred in this manual as a " trimmer / brushcutter." Some smaller and / or lightweight FS models may only be used as a trimmer , , they may not be used with metal term "clearing saw" indicates a high-powered trimmer / brushcutter that is particularly suited for use with a circular saw blade to clear saplings or small models with an "R" on the nameplate were originally configured (at the time of distribution) as a trimmer with a loop more fully explained later in these Safety Precautions, to reduce the risk of personal injury, make sure your unit is equipped with the proper handle, harness and deflector for the type of cutting attachment you are using.

7 Use only cutting attachments that are specifically authorized by STIHL for use on your FS your STIHL dealer show you how to operate your power tool. Observe all applicable local safety regulations, standards and not lend or rent your power tool without the instruction manual. Be sure that anyone using it understands the information contained in this use of this machine may be hazardous. If the rotating line or blade comes in contact with your body, it will cut you. When it comes in contact with solid foreign objects such as rocks or bits of metal, it may fling them directly or by ricochet in the direction of bystanders or the operator. Striking such objects could damage the cutting attachment and may cause blades to crack, chip or break.

8 Thrown objects, including broken heads or blades, may result in serious or fatal injury to the operator or bystanders. STIHL does not recommend the use of rigid blades when cutting in stony your trimmer / brushcutter equipped with the appropriate cutting attachment only for cutting grass, brush, wood and similar not use it for other purposes, since misuse may result in personal injury or property damage, including damage to the should never be allowed to use this power tool. Bystanders, especially children, and animals should not be allowed in the area where it is in reduce the risk of injury to bystanders and damage to property, never let your power tool run unattended.

9 When it is not in use ( during a work break), shut it off and make sure that unauthorized persons do not use of these safety precautions and warnings apply to the use of all STIHL trimmers / brushcutters. Different models may have different parts and controls. See the appropriate section of your instruction manual for a description of the controls and the function of the parts of your Precautions and Working TechniquesBecause a trimmer / brushcutter is a high-speed, fast-cutting power tool sometimes equipped with sharp cutting blades, special safety precau-tions must be observed to reduce the risk of per-sonal is important that you read, fully understand and observe the following safety precautions and warnings.

10 Read the instruction manual and the safety precautions periodically. Careless or improper use may cause serious or fatal 130, FS 130 REnglish4 Safe use of a trimmer / brushcutter power use of the power OPERATORP hysical ConditionYou must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol, etc.) which might impair vision, dexterity or judgment. Do not operate this machine when you are alert if you get tired, take a break. Tiredness may result in loss of control. Working with any power tool can be strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before operating this use of a power tool (or other machines) exposing the operator to vibrations may produce whitefinger disease (Raynaud's phenomenon)