STS17.2 Stainless Steel Compact Pipeline Connector Steam ...

1 Stainless Steel Compact Pipeline Connector Steam trapping station 3. version Upstream isolation 3 with double upstream isolation valve Upstream isolation valve 3. version Downstream isolation with single upstream isolation 1 valve 2. 3 16. 2. Upstream isolation valve 3 2. Downstream isolation valve Strainer 1. 16 19. 2. Optional 2. Strainer 19 WLSL1. integral sensor BDV1. Description blowdown The Compact Pipeline Connector Steam trapping station SSL1 valve has been designed to provide a convenient ready to install trapping integral sensor solution, which includes: upstream and downstream isolation valves (2), body incorporating universal Connector + strainer (1) Optional extras and check valve blanking plug (16).

2 Integral sensor type SSL1 ( Steam only) or WLSL1 (for Available types waterlogging) for use with R1C or WLSL1 with DIODE for use The is available with either single or double upstream with RI6C are available as optional extras, to enable operational isolation. monitoring of the Steam trap. Please note that the optional Spiratec SSL1 and WLSL1 sensors must not be fitted when the The trapping solution incorporates Spirax Sarco is installed in a vertical application. universal Connector , which allows speedy trap maintenance. The following swivel Connector Steam traps (sold separately) can BDV1 blowdown valve is also available for cleaning the strainer be used with this Pipeline Connector enabling it to be tailored to suit during operation.

3 Care should be taken when using the BDV1. any application: blowdown valve as the discharge may be hot. Please note that a BDV1 cannot be used when a Spiratec sensor has been chosen - UTD52 thermodynamic Steam traps. to be part of the unit. - UFT32 ball float Steam trap. Retrofit double isolation valve and spool piece to convert a - UIB30 and UIB30H inverted bucket Steam traps. single upstream isolation version to double isolation. - UBP32 balanced pressure Steam trap. Insulation jacket is available to reduce heat loss and energy - USM bimetallic Steam trap. wastage. See separate literature.

4 Standards These products fully comply with the requirements of the Materials European Pressure Equipment Directive 97 / 23 / EC. No. Part Material Certification These products are available with certification to EN 10204 1 Body Stainless Steel ASTM A351 Gr. CF8. Note: All certification / inspection requirements must be stated 2 Isolation ball valves Stainless Steel ASTM A182 F316L. at the time of order placement. For other certification contact 3 Handle Mild Steel ENP coated Spirax Sarco. Check valve 16 Stainless Steel ASTM A276 431. Sizes and pipe connections blanking plug ", " and 1" screwed NPT or socket weld.

5 (BSP optional) 19 Strainer cap Stainless Steel ASTM A582 416. ", " and 1" ASME 150 and ASME 300. (DN15, DN20 and DN25 flanged EN 1092 PN40 optional). Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections the interests of development and improvement of the product, we reserve the right to change the specification. TI-P128-22-US Pressure / temperature limits Dimensions /weights (approximate) in mm and kg Pressure psig 0 100 200 300 400 500 D. A. Temperature C. Temperature F. 400. with single 300 upstream isolation Steam C.

6 Saturation B 200. curve 100. D C 14. Pressure bar g B. The product must not be used in this region. A - B Flanged ASME Class 300, screwed and socket weld. A - C Flanged EN 1092 PN40. A. A - D Flanged ASME Class 150. D with double upstream isolation System design conditions PN40. PMA Maximum allowable pressure 580 psi g @ 248 F (40 bar g @ 120 C). TMA Maximum allowable temperature 446 F @ 145 psi g (230 C @ 10 bar g). Minimum allowable temperature 14 F (-10 C) C. Maximum operating ASME 150 200 psi g ( bar g). PMO pressure for saturated Steam service All other connections 254 psi g ( bar g).

7 TMO Maximum operating temperature 446 F @ 145 psi g (230 C @ 10 bar g). B. Minimum operating temperature 14 F (-10 C). Designed for a maximum cold 870 psi g (60 bar g). hydraulic test pressure of: A. Dimensions /weights (approximate) in inches and pounds Dimensions in inches (mm). Isolation Size and connection Weight lb (kg). A B C D. Single 1/2" NPT and 1/2" SW (222) (76) (93) (90) ( ). Single 3/4" NPT (222) (76) (93) (90) ( ). Single 3/4" SW (213) (76) (93) (90) ( ). Single 1" NPT (229) (76) (93) (90) ( ). Single 1" SW (269) (76) (93) (90) ( ). Single 1/2" ANSI 150 (268) (76) (93) (90) ( ).

8 Single 1/2" ANSI 300 (294) (76) (93) (90) ( ). Single 3/4" ANSI 150 (272) (76) (93) (90) ( ). Single 3/4" ANSI 300 (306) (76) (93) (90) ( ). Single 1" ANSI 150 (274) (76) (93) (90) ( ). Single 1" ANSI 300 (309) (76) (93) (90) ( ). Double 1/2" NPT and 1/2" SW (350) (76) (93) (90) ( ). Double 3/4" NPT (350) (76) (93) (90) ( ). Double 3/4" SW (341) (76) (93) (90) ( ). Double 1" NPT (357) (76) (93) (90) ( ). Double 1" SW (397) (76) (93) (90) ( ). Double 1/2" ANSI 150 (396) (76) (93) (90) ( ). Double 1/2" ANSI 300 (422) (76) (93) (90) ( ). Double 3/4" ANSI 150 (400) (76) (93) (90) ( ).

9 Double 3/4" ANSI 300 (434) (76) (93) (90) ( ). Double 1" ANSI 150 (399) (76) (93) (90) ( ). Double 1" ANSI 300 (437) (76) (93) (90) ( ). TI-P128-22-US Spirax Sarco, Inc., 1150 Northpoint Blvd, Blythewood, SC 29016 Telephone: (803) 714-2000 FAX (803) 714-2222. Spare parts The spare parts are available as indicated below. No other parts are supplied as spares. Available spares Isolation ball valve seat and stem seals 8, 9. Strainer screen and gasket 21, 22. SSL1 Spiratec sensor 23. Spare sensor and sensor gasket WLSL1 diode waterlogging sensor 24. Spiratec retrofit kit Note: State whether an SSL1 or WLSL1 sensor is required.

10 20, 21 + 23 or 24. Check valve assembly 17, 18. Double isolation conversion kit (includes spool piece and additional isolation valve) X. BDV1 blowdown valve retrofit kit 20, 21 + 25. How to order spares Always order spares using the description given in the column headed 'Available spares' and state the size and model number. Example: 1 off Spare Spiratec sensor and sensor gasket with WLSL1 diode waterlogging sensor for a " Compact Pipeline Connector Steam trapping station . 18. 17. 8 9 8. X. X is a double isolation conversion kit 22. 21. 20. 20. 20. 25. 23 BDV1. blowdown 24 valve * integral sensor SSL1.