Submittal Data Model PELV-100 Penthouse Elevator Vented …

1 Submittal DataModel PELV-100 Penthouse Elevator Vented HoodManufactured by Buckley Associates, Inc, Hanover, MassachusettsSheet Metal Union Local Associates, 2013 ModelDimensional DataCurbOptional GlassDamperHoodABCSize ( )Size ( )QtySizeFree AreaActuatorQtyOpening SizePELV-100-32-13224 3631 31 18 14126 sq. 18 PELV-100 -32-23224 3631 31 18 14226 sq. 18 PELV-100 -38-13824 3637 37 24 14132 sq. 18 PELV-100 -38-23824 3637 37 24 14232 sq. 18 PELV-100 -44-14424 3643 43 30 14138 sq. 18 PELV-100 -44-24424 3643 43 30 14238 sq. 18 Unless otherwise noted, all dimensions are in AvailableApplication and DesignThe PELV-100 Penthouse Elevator Vented hood is a gravity ventila-tor Penthouse with an 18" x 18" gasketed access door and a low leakage opposed blade control damper with either a 24 VAC or 120 volt actuator.

2 The unit is provided with weather hood (s) to help minimize wind driven rain and snow infiltration. The unit is shop assembled and shipped loose from the ConstructionBirdscreen .055 expanded aluminum, inside mountFinish MillRoof formed aluminum with in. insulationHood aluminum, non-insulated with " " Stamped Grille in OpeningRoof Opening Based on Smoke Damper Size ( ) - 4 Curb 18 ga. galvanized, 2 in. mounting flange, welded construction, 1" thick insulation GPI Size .. See ChartDamper Model ..Greenheck VCD-23 Size and Free See Chart Actuator .. 120V or 24 VAC, Mounted Internally with End Switch, Power Closed, Fail OpenGlass (Optional) in.

3 Clear tempered glassWater Infiltration DisclosureLouvered penthouses provide a level of defense against weather infiltration, however; louvered penthouses cannot be considered weather proof. Buckley recommends provisions to manage weather infiltration be present beyond the louvered Penthouse so as to mitigate weather passage and prevent weather related damage to building conditions or equipment. Design of or materials as required to manager weather infiltration are not provided by Buckley. Buckley also recommends sound product application/engineering practice(s) be employed when applying louvered penthouses. Such practice(s) may include, but are not limited to, conservative throat and louver face area velocities.

4 Buckley shall not be held liable for water related damage to building conditions or Leakage Control DamperApplication & DesignThe Model VCD-23 is a low leakage control damper for application as anautomatic control or manual balancing damper. This Model is intended forapplications in low to medium pressure and velocity systems. A wide range ofelectric and pneumatic actuators are available. Non-jackshafted dampers willbe supplied with a blade drive lever for internal actuator mounting. Whenexternal actuator mounting is specified in which case an extension pin with clipkit will be provided. Note: The extension pin with clip kit includes the extensionpin and : 5 in.

5 WgVelocity: 3,000 ft/minLeakage: Class 1A @ 1 in. wg, Class 1 @ 4 in. wgTemperature: F. Consultfactory for higher instructions available at H W 5 Max. Notes: All dimensions shown are in units of & H furnished approximately in. undersized and only refer todamper dimensions (sleeve thickness is not included).Electrical accessory wiring terminates at the wiring is required to individual FEATURESB lade Action:OpposedFrame Type:ChannelMaterial:GalvanizedAxle Material:SteelAxle Bearings:SyntheticLinkage Material:SteelBlade Seal:TPEJamb Seal Mat.:304 SSSizing:NominalFrame Thickness (ga):16 Actuator Type:120 VACA ctuator Mount:InternalActuator Location:Left SideFail Position:OpenCycle:60 CycleJackshafting:No PreferenceAuxiliary Switches:YesTemp.

6 Rating (F):180ID #TagQtyW (in.)H (in.)Drive Date: STOCK VCDJob:D-1 Mark: CAPS :\Job Files\Greenheck\Salesperson\CCameron\BUC KLEY\STOCK 1 of 2 Damper Drive Arrangements Job Summary -Start-Drive Arrangement: Drive-CC-11-1 FIL-0 Damper Drive Arrangements Job Summary -End-6/26/2013 Printed Date: STOCK VCDJob:CAPS :\Job Files\Greenheck\Salesperson\CCameron\BUC KLEY\STOCK 2 of 2