Support Material Beam Clamps Pg. 154 - MP Husky

1 For more information or to order, call 1-800-277-4810 or visit Down Clamps & Expansion Guides Pgs. 148-150 Tray Hanger clips Pg. 151 Suspension Channels and Fittings Pgs. 152-153 beam Clamps Pg. 154 Hangers Pg. 155 Supports Pgs. 156-157 Brackets Pgs. 158-160 12- Support 2010 MP Husky . All rights TRAY148 Hold Down ClipsSingle Hold Down/Expansion Clips for Flange-In Trough or LadderThis clip holds flange in trays securely to a lower Support channel or bracket and can also be used as an expansion guide with a W-12 washer placed under the base.

2 (W-12 washer sold separately) Use 1/2 hardware. ( Husky Way)3-3/8 H,NSH0,PSH0,ASH6HB-24HB-26HB-2 GHB-2 NHB-24 J,NSJ0,PSJ0,ASJ6JB-24JB-26JB-2 GJB-2 NJB-24-1/2 JA,JB,JC,YA,YDKB-24KB-26KB-2 GKB-2n/a6 M,MB,MD,X,X1,XA,NSM0, PSM0,ASM6MB-24MB-26MB-2 GMB-2 NMB-26-1/4 XB,XC,XDXCB-24 XCB-26XB-2 GXCB-2n/a7 MD7,MD74,X7,X71,XC7,XB7X7B-24X7B-2 6X7B-2 GX7B-2n/aSingle Hold Down Clips for Flange-In This clip holds all Husky ladders to a Support channel or In3/8 HdwSHDC-V4 HDC-V6 HDC-VGHDC-VFlange In1/2 HdwSHDC-V1/24 HDC-V1/26 HDC-V1/2 GHDC-V1/2*All part numbers are for 1 Hold Down Clips for Flange-Out or I- beam LadderThis clip holds Husky Ladder trays securely to a lower Support channel or bracket.

3 Use 1/2 Down/Expansion Guide for Flange Out LadderThese special heavy duty tray hold down Clamps and expansion guides are ideal for fas-tening tray to C-Channels, such as those found on bridges. They are easy to install and reduce field labor costs since the beam clamp set screw eliminates the need to drill the Flange Out LaddersZinc PlatedHDGAFHold Down ClampHP-514A-PWGHP-514-PWExpansion GuideHP-514A-PWO GHP-514-PWOTrayTypeAluminumZincPlatedSS3 04SS316 HDGAFAll Flange OutAHDC-ASHDC-A4 HDC-A6 HDC-AGHDC-AHardware not MaterialCABLE 2010 MP Husky . All rights Down ClipsDouble Hold Down Clips for Ladder and TroughDouble hold down clips allow two side by side trays to be fastened to the Support with one clip and less hardware.

4 Use 1/2 Down Bolts for ChannelSpecial 3/8 bolts are used to fasten 4 & 6 wide Husky channels to channel hangers and other AHDC-2 ASHDC-2A4 HDC-2A6 HDC-2 AGHC-2A1-1/2 AHDC-2CA SHDC-2CA 4 HDC-2CA 6 HDC-2 CAGHDC-2CA1-3/4 AHDC-2 CSHDC-2C4 HDC-2C6 HDC-2 CGHDC-2 CZincPlatedHDGAFC atalog Flange In (except I8) Husky TrayAEXG-VL SEXG-VL 4 EXG-VL 6 EXG-VLGEXG-VLAll Flange Out & I-BeamHusky TrayAEXG-EL SEXG-EL 4 EXG-EL 6 EXG-ELGEXG-EL*All part numbers are for 1 for LadderExpansion guides are used to secure ladder style trays, while guiding the tray during movement during thermal expan-sion.

5 For expansion guide recommendations, contact your local representative or the factory. Use 1/2 PadCatalog #INSL-VEUsed for insulating hold-downs and for insulating 2010 MP Husky . All rights TRAYE xpansion GuidesGuides for Double Ladder and TroughThese expansion guides are used to retain two side by side trays, while allowing tray move-ment due to thermal expansion. Use 1/2 Down Clips/Expansion Guides for ChannelThese clips hold 4 and 6 wide Husky Channel to a lower Support channel or bracket and can be used as an expansion guide with a W-5 washer placed under the base. (W-5 washers sold separately) Use 3/8 hardware.

6 ChannelSHDC-GU 4 HDC-GU 6 HDC-GU GHDC-GUExpansion Guide Bolts for ChannelThese 3/8 guide bolts are used to retain 4 and 6 wide Husky Channel to the Support , while allowing thermal expansion ,NSH0,PSH0,ASH6AG-2H-EXSG-2H-EX4G-2H-EX6 G-2H-EXGSG-2H-EXJ,B,NSJ0,PSJ0,ASJ6AG-2B- EXSG-2B-EX4G-2B-EX6G-2B-EXGSG-2B-EXJA,JB ,JC,BA,BB,BCAG-2KB-EXSG-2KB-EX4G-2KB-EX6 G-2KB-EXGSG-2KB-EXYA,CAAG-2CA-EXSG-2CA-E X4G-2CA-EX6G-2CA-EXGSG-2CA-EXYD,CDAG-2CD -EXSG-2CD-EX4G-2CD-EX6G-2CD-EXGSG-2CD-EX M,MB,MD,P,PB,PD,NSMO,PSM0,ASM6AG-2PB-EXS G-2PB-EX4G-2PB-EX6G-2PB-EXGSG-2PB-EXX,X1 ,XB,XC,XD,E,E1,EB,EC,ED, EA,XAAG-2EB-EXSG-2EB-EX4G-2EB-EX6G-2EB-E XGSG-2EB-EXX7,E7,X71,E71,XB7,XC7, EB7,EC7AG-2E71-EX SG-2E71-EX 4G-2E71-EX 6G-2E71-EX GSG-2E71-EXMD7,MD74,PD7,PD74____SG-2MD7- EX 4G-2MD7-EX 6G-2MD7-EX GSG-2MD7-EXHanger Clip Set for Flange In TraysThe two-piece Husky Trough and Husky Ladder hanger is used in conjunction with the 1/2 hanger rod and eliminates the need for separate horizontal Support members and hold down clips.

7 (Part # is for one top and bottom set not for use on Husky way).TrayTypeZincPlatedSS304SS316 HDGAFH,J,JA,JB,JC,M,MB,MD,MD7,MD74 SHC-M4HC-M6HC-MGSHC-MYASHC-YA4HC-YA6HC-Y AGSHC-YAXASHC-XA4HC-XA6HC-XAGSHC-XAXB,XC SHC-XB4HC-XB6HC-XBGSHC-XBX,X1,XC7,XD,XD7 ,YD,X71,X7 SHC-YX4HC-YX6HC-YXGSHC-YX15012- Support MaterialCABLE 2010 MP Husky . All rights ClipsI- beam Tray HangerTray hanger for 1-1/4 and 2 flange I- beam Trays (not for I6 & I8). Includes top and bot-tom Clamps and spacer. Hanger rod, washers and hex nuts purchased ,IJB,IJCSHC-IJA4HC-IJA6HC-IJAGSHC-IJAIYB ,IYCSHC-IYC4HC-IYC6HC-IYCGSHC-IYCIMB,IMC ,IMD,IXA,IXB,IXC,IXDSHC-IXB4HC-IXB6HC-IX BGSHC-IXBIXD7 SHC-IXD7 4HC-IXD7 6HC-IXD7 GSHC-IXD7 Single Hanger Clips for Flange-Out TraysTwo inch wide single hanger clips are used with the 1/2 hanger rod to hold Husky Lad-der firmly in Hanger ClipsDouble hanger clips are used in the center of two side by side ladders and help with a 1/2 hanger rod.

8 The top bolt is included with each unit.*Above part numbers are for 1 SHC-CB4HC-CB6HC-CBGSHC-CBBA,BB,BCAHC-KBS HC-KB4HC-KB6HC-KBGSHC-KBCAAHC-CASHC-CA4H C-CA6HC-CAGSHC-CACD SHC-CD4HC-CD6HC-CDGSHC-CDP,PB,E,EA,E1 AHC-EPSHC-EP4HC-EP6HC-EPGSHC-EPEB,EC,EDA HC-EBSHC-EB4HC-EB6HC-EBGSHC-EBE7,E71,EB7 ,EC7 AHC-E71 SHC-E714HC-E716HC-E71 GSHC-E71PD7,PD74----SHC-PD74HC-PD76HC-PD 7 SHC-2B4HC-2B6HC-2 BGSHC-2 BBA,BB,BCAHC-2 KBSHC-2KB4HC-2KB6HC-2 KBGSHC-2 KBCAAHC-2 CASHC-2CA4HC-2CA6HC-2 CAGSHC-2 CACD SHC-2CD4HC-2CD6HC-2 CDGSHC-2 CDP,PBAHC-2 PSHC-2P4HC-2P6HC-2 PGSHC-2PE,EA,E1 AHC-2 ESHC-2E4HC-2E6HC-2 EGSHC-2 EEB,EC,EDAHC-2 EBSHC-2EB4HC-2EB6HC-2 EBGSHC-2 EBE7.

9 E71,EB7,EC7 AHC-2E71 SHC-2E714HC-2E716HC-2E71 GSHC-2E71PD7,PD74 SHC-2PD74HC-2PD76HC-2PD7 GSHC-2PD712- Support 2010 MP Husky . All rights TRAY152 Suspension Channels and Fittings Channels are used with 1/2 hanger rods to Support ladder style trays where hanger clips cannot be utilized and for troughs with or without hold-down clips. When used with trough, only HB-2,JB-2, etc. style hold-down clips can be Support ( ) = insert widthHanger RodsTrapeze Support ChannelsItemPlated SteelStainless 31612 0 Hanger Rod6 0 Hanger Rod3 -0 Hanger RodExtra Hex NutsExtra Lock WashersExtra Flat WashersHR-144 GHR-72 GHR-36GN-12W-9W-126HR-144G6HR-72G6HR-36G N-12-6SW-9-6SW-12-6 STray WidthAluminumHDGAFSS304SS31636 30 24 18 12 9 6 ASC-36 ASC-30 ASC-24 ASC-18 ASC-12 ASC-9 ASC-6 SSC-36 SSC-30 SSC-24 SSC-18 SSC-12 SSC-9 SSC-64SC-364SC-304SC-244SC-184SC-124SC-9 4SC-66SC-366SC-306SC-246SC-186SC-126SC-9 6SC-61/2 diameter, 13 threads per inch hanger rods can be used with all tray Support chan-nels, angles and hanger clips.

10 They have continuous threads and are furnished with 4 (N-12) nuts, 2 (W-9) lock-washers and 2 (W-12) flat allowable load:Use for design, 1100 lbs., in combination with all standard suspension fittings, hanger clips, and couplings normally used. The safe load is much Flange InAll Flange OutVACS-( )EACS-( )VSCS-( )ESCS-( )6 VSCS-( )6 ESCS-( ) Husky TroughHJJA,JB,JC,YA,MD7,MD74M,MB,MC----V ACS-( )-KVACS-( )-MVSCS-( )-HVSCS-( )-JVSCS-( )-KVSCS-( )-M6 VSCS-( )-H6 VSCS-( )-J6 VSCS-( )-K6 VSCS-( )-M12- Support MaterialCABLE 2010 MP Husky . All rights Channels and FittingsAngles are continuously slotted to hold down Husky Trough using HB-1 bolts, and can be used to Support all tray types with 1/2 hanger rod suspended from allowable load:Will safely Support any loaded tray of the designated width within the load limits of the hanger channel hangers are used to Support single 4 or 6 wide Husky Channels from 1/2 hanger rod.