SWAGE NIPPLES, BULL PLUGS, OIL

1 SSwwaaggee NNiipppplleess,, BBuullll PPlluuggss && OOiill CCoouunnttrryyFFiittttiinnggssCCaattaall oogguueeSWAGE NIPPLES, bull plugs , OILCOUNTRY FITTINGS, COUPLINGS,LOW TEMP & STAINLESS SWAGESMANUFACTURING SPECIFICATIONCSP Products Ltd, manufactures SWAGE nipples and bull plugs in accordance with A234, A420, A403 and MSS-SP95, from A106B, A333GR6 seamless pipe and A1000 series, low to medium carbon, fine grain, cold drawn barstock, and heat-treated to these specifications. The chemical and physical properties of the raw material fall withinthe ranges listed raw material purchased by CSP Products Ltd, is fully traceable to the mill source. A four-digit letter codeappears on all CSP products made since the institution of this program. As a result, mill test reports are availableat any time on products so RATINGSDue to the wide variation in service conditions, temperature, vibrations, etc.

2 , CSP Products Ltd. can make norecommendations as to allowable working pressures of SWAGE nipples and bull plugs . There are a number ofworking pressure formulas from which the end user may choose to determine the required wall thickness of thepiping system. It is our responsibility only to furnish a fitting with end dimensions equal to those of the pipe sizeand schedule CERTIFICATIONCSP Products Ltd, certifies that the material used to manufacture line pipe sizes of SWAGE nipples and bull plugshas been processed and heat treated to comply with all requirements of ASTM A234, ASTM A420, and ASTMA403, and that the chemical and physical properties of the raw material fall within the ranges listed maxMnP maxS maxSi 85K 85K PSI35 KPSI197A403WP304 max70K PSI25 KPSIA403WP316 max70K PSI25 KPSITHREADINGLine pipe, tubing and casing are inconformance with API 5 BCOATINGSZinc Electroplate ASTM A164 Type RSPhosphate Beveled EndsMARKINGAll CSP Products Ltd, fittings are permanently marked as follows.

3 Manufacturer s Symbol Material Specification WPB, WPL6, WP304, WP316 (Line PipeSizes) J55, N80, L80, 4140 Raw Material Code Each part is die stamped with a four lettercode identifying the raw material type, details of purchase and steel mill test Treatment When marked WPB, WPL6, an acceptableheat treatment is understood to have been Information Size and Wall BEVELSWeld Bevels are machined as perASME Products Ltd Well-ConnectedFull TraceabilityAll CSP Products Ltd swages, bull plugs , tubingand casing nipples, are traceable to the originalmill test report. To ensure traceability, all fittingsare steel stamped as follows.

4 Material SpecificationWPB, WPL6, WP304, WP316 (Line Pipe Only)J55, N80, L80, etcRaw Material CodeEach is stamped with a four-letter code foridentifying raw material type, details of purchaseand mill test TreatmentWhen marked WPB, WPL6, an acceptable heattreatment is understood to have been CSP Products Ltd products conform to thefollowing specifications, including ISO 5B ThreadingAPI 5CT End FinishingASME Weld BevelsMSS-SP95 Swages and bull PlugsASTM A23 Heat Treatment, Raw MaterialsASTM A164 Type RS Zinc ElectroplateCHARPY IMPACTAs RequiredNACE MR-01-75As RequiredDIN/EN As RequiredCARBON STEELS wage NipplesLINE PIPE SWAGES Size range 1/8 NPS / 6 DN 8 NPS / 200 DN Manufactured from A106 Grade B seamless pipe or colddrawn bar which is heat treated in accordance withASTM A234 Choice of raw material dependant upon size andreduction.

5 Available standard, extra heavy, schedule 160, or doubleextra heavy End finishes available: current API threads, beveled,square cut (for socket-weld), or grooved Available concentric and or toLengthStandard WeightExtra HeavyWeightDbl Ex. & 160 WeightSwageNipplesNPSDNINMMNPSDNINMMLBKG LBKGLBKG1 & 3/868 & 102-3/42-3 & 3/81/268 & & 3/81/2 & 3/468 & 1015 & 203-1/23-1/23-1 & 3/81/2 & 3/418 & 1015 & & 3/81/2 & 3/411-1/48 & 1015 & 2025324-1/24-1/24-1/24-1 & 3/81/2 & 3/411-1/41-1/28 & 1015 & 202532406-1/26-1/26-1/26-1/26-1 & 3/411-1/41-1/2215 & & 3/411-1/41-1/22 & 2-1/215 & 2025324050 & thru 1-1/22 thru 315 thru 4050 thru & 3/411-1/4 & 1-1/222-1/23 & 3-1/215 & 202532 & 40506580 & thru 1-1/22 & 2-1/23 & 3-1/2425 thru 4050 & 6580 & thru 1-1/22 & 2-1/23 & 3-1/24525 thru 4050 & 6580 & thru 34 & 5650 thru 80100 & page 1 for certification of raw material and sizes of 1 NPS/25 DN and smaller swages inEX and 160 weights available in sizes on this page have been processed in a manner strictly conforming to therequirements

6 Of ASTM A234 from material fully meeting all requirements of that correct marking for SWAGE nipple to denote conformance with this specification is WPBS-9 . All sizes 1 PS / 25 DN and smaller will be made from hex barstock. Most sizes 1-1/4 NPS / 32 DN and larger will be made from pipe, and where pipe is not a practical rawmaterial, round barstock will be used. No sacrifice of properties will result from such STEELBull PlugsLINE PIPE bull plugs Nominal Pipe Size range 1/8 NPS / 6 DN 8 NPS / 200DN Manufactured from A106 Grade B seamless pipe or colddrawn bar which is heat treated in accordance withASTM A234 Choice of raw material dependant upon size andreduction. Available standard, extra heavy, schedule 160, or doubleextra heavy or solid End finishes available: current API threads, beveled,square cut (for socket-weld), or grooved All bull plugs can be or WeightExtra HeavyWeightSolid WeightDbl Ex.

7 & 160 WeightBull PlugsNPSDNINMMINMMLBKGLBKGLBKGLBKG1 COUNTRY FITTINGSC urrent API Thread APIT hreadStandardsNPSDNINMMPipeTubing &Casing EUE502-3/8608 EUE652-7/8738 EUE803-1/2888 EUE9041008V8 EUE1004-1/21148 COUNTRY FITTINGST ubing SwagesCasing SwagesTUBING SWAGES Nominal sizes 1 3-1/2 / 25 90 DN upset and non-upset ends tubing swages available with anycombination of current API threads (8 round, 10 round,11-1/2 V, 8 V, etc.) and are stock items in J-55, K-55, N-80, and L-80 Wall thicknesses available are standard through doubleextra heavy For different grades of material (stainless, brass, etc.)and different threads, consult factory Thread types are color-coded for easy or toLengthStandard WeightExtra HeavyWeightDbl Extra HeavyWeightLarge endupsetreduced toregular - 120 - 1-1/420 324-1 1/2 3/48 15 1-1/4 1-1/225 32 1-1/4 1-1/225 32 1-1/4 1-1/225 32 2-1/250 1-1/4 1-1/225 32 2-1/250 3-1/280 or toLengthStandard WeightExtra HeavyWeightDbl Extra HeavyWeightLarge endnon-upsetreduced - 120 - 1-1/420 324-1 1-1/4 1-1/225 32 1-1/4 1-1/225 32 1-1/4 1-1/225 32 2-1/250 1-1/4 1-1/225 32 2-1/250 3-1/280 350 350 Nipples non-upset on large end are made from J-55, K-55.

8 N-80 or the most appropriate material Nipples upset on large end are made from J-55 unless otherwise COUNTRY FITTINGST ubing SwagesCasing toLengthStandardWeightExtra HeavyWeightDbl Ex. & 160 WeightSwageNipples OilCountrytubing &casing nonEUE - 3/48 203-1 - 1/23/4 & 18 1520 & - 3/41 & 1-1/48 - 2025 & 324-1/24-1 - 3/41 2 OD8 & 2025 50 OD6-1/26-1 - 3/41 - 1-1/22 & 2-1/168 - 2025 - 4050 & - 1-1/22 & 2-1/225 - 4050 & - 1-1/22 & 4 OD25 - 4050 & 100 - 1-1/22 & 4-1/2 OD25 - 4050 114 - 1-1/22 & 2-1/23 5 OD25 - 4050 & 6580 125 - 1-1/22 & 2-1/23 4 OD4 6 OD25 - 4050 & 6580 100 OD100 150 - 1-1/22 & 2-1/23 5 OD5-1/2 OD & 6 OD25 - 4050 & 6580 125 OD140 OD & 150 34 OD 6 OD6-5/8 OD & 7 OD50 - 80100 OD & 150 OD168 OD & 178 - 34 6 OD6-5/8 OD & 7-5/8 OD50 - 80100 & 150 OD168 OD & 194 - 34 6 OD6-5/8 OD & 8-5/8 OD50 - 80100 & 150 OD168 OD & 194 - 34 6 OD6-5/8 OD - 7-5/8 OD8-5/8 OD & 9-5/8 OD50 - 80100 & 150 OD168 OD - 194 OD219 OD & 245 All SWAGE

9 Nipples on this page are made from J-55, K-55, N-80 or the most appropriate material available Casing threads (8 Rd.) on one end with any thread or finish (beveled) on the other end Also includes casing sizes where no thread is specified CARBON STEELBull PlugsCASING bull plugs 4-1/2 / 114 mm 13-3/8 / 340 mm casingbull plugs available with all current API threads orbeveled for welding Casing bull plugs available in standard, extra heavy ordouble extra heavy, and are manufactured from J-55, K-55, N-80 or or WeightExtra Heavy WeightDbl Ex. & 160 WeightTubingNPSDNINMMINMMLBKGLBKGLBKG3/4 EUE323-1 EUE403-1 EUE655-1 EUE806-1 Plugs4 EUEAPI or WeightStandard WeightExtra HeavyWeightDbl Ex. & 160 WeightCasingINMMINMMLBKGLBKGLBKG4-1 Plugs8-5 NIPPLES CSP manufactures a full line of adapter nipples in sizes 1 NPS / 25 DN through 8 NPS / 200 DN from seamless A106 pipe Adapter nipples available in threaded, beveled, grooved and virtualy all combinations of these end connections Nipples manufactured in schedule 40, schedule 80, schedule 160 and double extra heavy wall SizeWeightNPSDNLBKG4-1 bull plugs listed above are made from J-55 (or better).

10 Such items in XH and XXH are made from J-55, K-55, N-80or the most appropriate material COUNTRY FITTINGST ubing NipplesTUBING SWAGES Nominal sizes 1 3-1/2 / 25 90 DN upset and non-upset ends Lengths are 4 18 Tubing nipples available with any combination of currentAPI threads (8 round, 10 round, 11-1/2 V, 8 V, etc.) andare stock items in J-55, K-55, N-80, and L-80 Wall thicknesses available are standard through doubleextra heavy For different grades of material (stainless, brass, etc.)and different threads, consult factorySizeTubing nipplesstandard weightNPSDNEnd Connection125 Upset API Threads: One or Both Ends125 Non-upset (Regular)1-1/432 Upset API Threads: One or Both Ends1-1/432 Non-upset (Regular)1-1/240 Upset API Threads: One or Both Ends1-1/240 Non-upset (Regular)250 Upset API Threads: One or Both Ends250 Non-upset (Regular)2-1/265 Upset API Threads: One or Both Ends2-1/265 Non-upset (Regular)380 Upset API Threads: One or Both Ends380 Non-upset (Regular)4100 Upset API Threads: One or Both Ends18 / 457 mm andshorter upset andnon-upset4100 Non-upset (Regular)SizeTubing nipplesextra heavy weightNPSDNEnd Connection125 Upset API Threads: One or Both Ends125 Non-upset (Regular)1-1/432 Upset API Threads: One or Both Ends1-1/432 Non-upset (Regular)1-1/240 Upset API Threads.