swingo 760E - TASKI

1 swingo 760EV005 / 12089-82 1638*12089-82*EN .2ES .14ZH .26 ENESZH2 Translation of the original instructions of useLegend:ContentSafety instructions.. 2 Cleaning products .. 4 Further documents .. 4 Structural layout .. 5 Prior to commissioning .. 6 Beginning work with the machine .. 7 End of operation .. 8 Service, maintenance and care.. 10 Malfunctions .. 11 Technical data.. 12 Accessories.. 12 Transport.. 12 Disposal.. 12 Machine dimensions .. 13 Intended useThe machine is intended for commercial use ( in hotels, schools, hospitals, factories, shopping centers, offices, etc.). Subject to strict compliance with the instructions of use, these machines are used for the wet cleaning of hard flooring.

2 These machines are exclusively designed for use in interior instructionsDue to their design and construction, TASKI machines comply with the relevant essential health and safety requirements of the EC directives; they therefore have the CE !Always read the instructions of use and the safety instructions before using the machine for the first instructions of use must be kept in a safe and well accessible place so that you can refer to them at any :This sign designates important informa-tion. Failure to follow these instructions may result in danger to persons and/or ex-tensive damage to property!Attention:This sign designates important informa-tion.

3 Failure to follow these instructions may result in faults and damage to proper-ty!Notice:This sign designates important information regarding the efficient use of the product. Failure to follow these instructions may re-sult in faults!It includes instructions for the work steps that you must carry out in :The machine must not be used for polish-ing, oiling, the application of wax, carpet cleaning or dust removal. The wet clean-ing of parquet and laminate flooring with this machine is at your own :Changes to the machine that have not been authorized by Diversey will lead to the expiry of safety marks and CE confor-mity. Using the machine for purposes oth-er than the intended purpose can cause injuries to persons, and damage to the ma-chine and the working environment.

4 Such cases will usually result in the termination of any warranty and possible guarantee :The machine may only be used by per-sons who are adequately trained for the use of the machine or who have provided proof of their skills regarding the use of the machine and who are explicitly commis-sioned to use the :The machine must not be used by people with reduced physical, sensory or mental capacities, including children or people who lack experience or must be supervised to ensure that they do not play with the :Do not use the machine in rooms where explosive or highly combustible substanc-es ( gas, solvents, heating fuel, dust, etc.) are stored or processed.

5 These substances could be ignited by the electrical or mechanical components of the :Do not use the machine for the vacuum cleaning of poisonous, harmful, caustic or irritating substances ( dangerous dust, etc.). The filter system does not adequate-ly filter out these kinds of substances. Possible impacts on the health of the user or third persons cannot be ruled :Pay attention to the local situation as well as to third persons and children! In the vi-cinity of blind spots such as doors or curves in particular, it is important to re-duce :Do not transport other persons and objects with this :In case of malfunction or defect or after collisions or toppling over, the machine must be inspected by an authorized expert before restarting.

6 The same applies if the machine was left outdoors, immersed in water or subjected to :The machine must be stopped immediate-ly in case of damage to safety relevant parts such as brush covers, power supply cords or covers that enable access to live :The machine must not be stopped, parked or stored on slopes. Caution:The machine must be switched off for any work carried out on the :Do not use the machine in rooms with high electromagnetic interference (electric smog).Caution:The machine must not be used on slopes >2%.Sharp cornering on slopes can affect the stability of the machine and is therefore prohibited. Danger of :The machine must be protected against unauthorized use.

7 Therefore, keep the machine in a locked room before leaving :Operate and keep the machine in a dry and low-dust environment at temperatures between +10 C / + 50 F and +35 C/ + 95 F degrees :Only authorized experts who are familiar with all safety instructions relevant for this machine are allowed to repair mechanical or electrical machine :Only tools (brushes, pads or similar) that are specified in these instructions of use under accessories, or which have been recommended by a TASKI consultant, may be used. Any other brushes might im-pair the safety and functions of the :National regulations for personal protec-tion and accident prevention as well as the manufacturer's instructions for the use of cleaning solutions must be consistently :It is forbidden to plug in or unplug the main power supply cord with wet hands!

8 Attention:Make sure that the rated voltage stated on the machine label is the same as the volt-age rating of the plug socket!Attention:Take care not to damage the power supply cord by rotating tools (brushes, pads or similar), crimping, tearing or damaging the power supply cord through heat, oil, or sharp objects!Attention:In case of foam or liquid leakage from the machine, the suction unit must be switched off : TASKI machines and devices are de-signed such that health risks caused by noise emissions or vibrations can be ruled out according to the current state of sci-ence. See the technical data on page productsFurther documentsNotice: TASKI machines are designed in such a way that optimal cleaning results can be achieved if TASKI cleaning products are cleaning products may cause mal-functions and damage to the machine or the , we recommend the exclusive use of TASKI cleaning caused by inappropriate cleaning products are not covered by the further details, please contact your TASKI service.

9 The electric diagram of this machine is provided in the spare parts contact your customer service for further layout1 Switch bracket drive2 Driving handles3 Operating hour counter (option)4 Drain hose cleaning solution (blue cover)5 Drain hose waste water (red cover)6 Water regulating set7 Foot pedal tool8 Foot pedal squeegee9 Squeegee10 Tools (brushes, pads, etc.)11 Brush unit12 Cleaning solution switch13 Suction unit switch14 Main switch15 Fresh water tank filter16 Recovery tank17 Float (Overfill protection recovery tank)18 Suction filter19 Dirt sieve20 Solution tank21 Dosage aid22 Tank lid23 Tank lid unlocking891076234511413121120 FEN6 Prior to commissioningBrush installationBefore inserting, please check: that the brush does not fall below the red marking (bristles) or 1cm of bristle length.

10 The pad for wear and cleanliness before assemblyFilling the fresh water tankAttention:Do not use brushes which have reached their wear limit. The wear limit is indicated by the length of the red bristle. Do not use worn or contaminated pads. Use original TASKI brushes only. Failure to observe these instructions may result in inade-quate cleaning results or even floor dam-age. The machine must be switched off (main switch). Position the tools under the tool unit. Plug the power supply cord into the mains socket. Switch on the machine (key switch).Switch lights up Unlock the foot pedal and lower the tool slowly. Briefly press the operating this way the tool is centered and :Lightly moving the machine backwards and forwards at the driving handle helps it to engage.