Transcription of T-SERIES ENCLOSURE HEATER
1 T-SERIES ENCLOSURE heaters pecifications subject to change without :Wattage:Up to 400 watts / unit for T3Up to 600 watts / unit for T2 Supply voltage: 115, 230 and 277 VAC (special order 12 & 24 VDC, and 100 & 208 VAC)Classifications:NEC & CSA: Class I Division 1 Group A, B, C, & D (T2 or T3),ATEX: Zone I EEx d IIC T3 Mounting: Variable positioningControl Options:Tamper Proof Thermostat - 50 F/10 C, 75 F/25 C, 100 F/40 C, 125 F/50 C, 150 F/65 CDimensions: T-SERIES ENCLOSURE heaters are designed with standardredundant internal protection for long trouble freeoperation. They are also configurable for horizontal orvertical installation with maximum efficiency. Standardtemperature ratings and operating voltages are factory for other T-ratings, operating voltages andtemperature control set points if Crystal Industrial Court St. Louis, MO 63114 Ph +1 (314) 236-2020 Fax +1 (314) 236-2080 Mallekotstraat 65 B 2500 Lier Belgium Ph +32 (0)3 491 9865 Fax +32 (0)3 491 2007 O Brien Corporation Bulletin QLT-TSERIES 25 SEPT 07 IISSOO 99000011::22000000 Certificate No.
2 CC1504-0001122 YCSA & FM Div 2 - B, N, J, P, JV or JN tracersTCCSA Div 1 - B, N, J, or P tracersModel Number* T-SERIES HEATER (Refer to sizing chart for selection)TX####XX#XXXXBody Size* (Must refer to sizing chart for selection)6" (150mm) Standard BodyS12" (305mm) Extended BodyET-RatingT3 Standard S and E body(maximum surface temperature 200 C/392 F)3T2 Optional for 600W applications E body only(maximum surface temperature 300 C/572 F)(T2 T-Rating not available for ATEX EEX)2 Voltage115 VAC1230 VAC2277 VAC3 Wattage*100 W10150 W15200 W20300 W (TE Body Only)30400 W (TE Body Only)40600 W (T2, TE Body Only)60 ApprovalsCl I, Div 2 Gp ABCDD2Cl I, Div 1 Gp CDCDCl I, Div 1 Gp ABCDABEEX d IIC (T2 T-Rating not available)EXThermostat50F (10C)C75F (25C)E100F (40C)G125F (50C)J150F (65C)MJunction BoxStandardJSIncreased Volume (accommodate termination of additional tracer)J1 Increased Volume (accommodate termination of two additional tracers)J2 Fin Sections* (Must refer to sizing chart for selection)None9 One Fin1 Two Fins2 OrientationHorizontalHVerticalVTracer Power Connection Kits for T-SERIES HEATER (Must select optional J1 or J2 junction box for additional volume)Consult factory for heaters not allowed by this chart.
3 * Model number must be configured in conjunction with T-SERIES Sizing Chart.
