T Series Subminiature Toggle Switches - C&K

1 FToggleF 37 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesFeatures/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models availableTypical Applications Hand-held telecommunications Instrumentation Medical equipmentSpecificationsCONTACT RATING: B contact material: VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page F-42 for additional LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 RESISTANCE: Below 20 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated RESISTANCE: 109 STRENGTH: 1000 Vrms min.

2 @ sea TEMPERATURE: 30 C to 85 : Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for Switches with standard options. For information on specific and custom Switches , consult Customer Service : Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat : Brass, chrome : Brass, nickel : Stainless SUPPORT: Brass, matte-tin CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate.

3 Q contact material: Copper alloy, silver plated. See page F-42 for additional contact SEAL: : Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available separately, see Section order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-38 thru F-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning FunctionT101 SPDT On-None-OnT102 SPDT Off-None-OnT103 SPDT On-Off-OnT105 SPDT SPDT SPDT DPDT On-None-OnT203 DPDT On-Off-OnT205 DPDT DPDT DPDT DPDT Flatted, anti-rotation, .490 highS .370 highK Locking lever, round tipL1.

4 640 highM1 .220 highS1 .410 highM .210 highL .290 highTerminationsA Right angle, PC thru-holeAV Vertical right angle, PC thru-holeC PC Thru-holeV3 Vertical mount V-bracketZ Solder lugW Wire wrapBushingH .220 high, threaded, flatH9 .220 high, unthreaded, flatCF Splashproof, .310 high, threaded, flatD9 .260 high, unthreaded, keywayT .310 high, threaded, flatT9 .310 high, unthreaded, flatTD .260 high, threaded, keywayTK .310 high, threaded, keywayY .220 high, threaded, keywayY9 .220 high, unthreaded, keywayContact MaterialB GoldP Gold, matte tinQ SilverG Gold over silverR Gold over silver, matte-tinSealE EpoxyFToggleF 38 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesSWITCH FUNCTIONDPDTMOM.

5 = Momentary* Wiring for 3-way switch refer to page N-10 All models with all options when ordered with G, L, R or Q contact 37 Dimensions are shown:IN(mm)Speci cations and dimensions subject to AngleProjectionSPDTSPST2-12-1 3-1 N/AOPEN N/A2-3 2-3 OPEN T103 T105 T107 T102 SPSCHEMATICCONNECTED TERMINALSPOS. 1 POS. 2 POS. 3 SWITCH FUNCTIONPOS. 1 POS. 2 POS. 3 MODEL marking on opposite sideC&K marking on opposite sideT108 2-1 NA 2-3 (8,57)SPDTPart number shown: (8,57)DPDT2-1,5-42-1,5-4N/AOPEN 2-3,5-62-3, T205 DPT203 ONOFFONT208 T211* ,5-4N/A2-3,5-62-1,5-42-3,5-62-3, TERMINALSPOS. 1 POS. 2 POS. 3 SWITCH FUNCTIONPOS. 1 POS. 2 POS. 3 MODEL marking on opposite sideC&K marking on opposite sideTerminal Nos. For Reference OnlyPart number shown: T201 SHZQEFT oggleF 39 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesACTUATORBUSHING2 Locking Positions 01 & 02 Models2 Position lock 03 & 11 Models3 Position lock 08 Models1 Position lock21H.

6 220 HIGH THREADED, FLATY .220 HIGH THREADED, KEYWAYT .310 HIGH THREADED, FLATH9 .220 HIGH UNTHREADED, FLATY9 .220 HIGH UNTHREADED, KEYWAYT9 .310 HIGH UNTHREADED, FLATL1 .640 HIGHL .290 HIGHK LOCKING LEVERP3 ANTI-ROTATION, FLATTED, .450 HIGHS .370 HIGHM .210 HIGHM1 .220 HIGH (with T bushing)2S1 .410 HIGH (with T bushing)Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 actuators have chrome finish (except K).Not available with CF bushing option code not required.

7 Not available with TX05 & TX07 actuators have natural aluminum on right side. To prevent accidental actuation, togglesmust be lifted before being actuated. When released, togglesagain lock in place. Overtightening mounting nut may causeactuator to standard with C, W & Z standard with A, AV & V3 with Z, C or W with A, AV or V3 (5,44)1 FToggleF 40 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesBUSHINGTERMINATIONSPANEL MOUNTING10-48 BUSHINGW ithout Locking RingWith Standard Locking Ring1/4 IN. BUSHINGWith Standard Locking RingWithout Locking RingWith Small Locking RingWithout Locking RingWithout Locking RingSPDPPC MOUNTINGT102 omit center .310 HIGH THREADED, KEYWAYZ SOLDER LUGW WIRE WRAPC PC THRU-HOLETD.

8 260 HIGH THREADED, KEYWAYD9 .260 HIGH UNTHREADED, KEYWAYCF SPLASHPROOF, .310 HIGH THREADED, FLATIP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer available with K locking lever available with P or R contact 41 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesTERMINATIONSA ctuator Shown In Pos. (5,44).022(0,56).128(3,25)PC MOUNTINGA ctuator Shown In Pos. (5,44).022(0,56).128(3,25)PC MOUNTINGA ctuator ShownIn Pos. (5,44).022(0,56).153(3,89)PC MOUNTINGA ctuator Shown In Pos. (5,44).026(0,66).153(3,89)PC MOUNTINGT102 Models:Omit terminal 2 Actuator ShownIn Pos. (5,44).358(9,08)PC MOUNTINGT102 Models:Omit center RIGHT ANGLE, PC THRU-HOLEA RIGHT ANGLE, PC THRU-HOLEAV VERTICAL RIGHT ANGLE, PC THRU-HOLEAV VERTICAL RIGHT ANGLE, PC THRU-HOLEV3 VERTICAL MOUNT, V-BRACKETNot available with T102 : Terminal bend radii and lead-in manufacturing Models: Omit terminal 2 NOTE: Terminal bend radii and lead-in manufacturing Horizontal Actuation SPDTT201MH9 ABE Horizontal Actuation DPDTT101MH9 AVBE Vertical Actuation SPDTT201MH9 AVBE Vertical Actuation DPDTT101MH9V3BE SPDTFT oggleF 42 Dimensions are shown: Inches (mm) Specifications and dimensions subject to T SeriesSubminiature Toggle SwitchesTERMINATIONSA ctuator Shown In Pos.

9 (5,44)PC MOUNTINGV3 VERTICAL MOUNT, V-BRACKETCONTACT MATERIAL * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel END CONTACTS: Coin silver, with gold plate over nickel CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel END CONTACTS: Coin silver, silver CENTER CONTACT & ALL TERMINALS: Copper alloy, silver TERMINALS: Copper alloy, with matte-tin over nickel models with all options when ordered with R, G, or Q contact contact material standard with A, AV, V3 & W contact material standard with C & Z E EPOXY SEALT201MH9V3 BEDPDTOPTION CODECONTACT MATERIALTERMINAL PLATINGRATINGSSILVER 5 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 6 LOW LEVEL/ DRY CIRCUITPOWERLOW LEVEL/DRY CIRCUIT OR VA MAX.

10 @ 20 V AC OR DC MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V MODELS: VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V HARDWARE1/4-40 uns-2A (13,3).658 (16,7).204 (5,2)759D02000 SEALING BOOT* Note: For use with S1 actuator style when combined with T, TK, and CF bushings.