Table of Contents - STANLEY® Engineered Fastening

www.StanleyEngineeredFastening.com www ...

Insert, Screw Thread, Self Locking (Inch Series) NASM33537 Insert, Standard Dimensions, Assembly (Inch Series) NASM8846 Insert, Screw Thread, Helical Coil (Inch Series) MA1565 Insert, Screw Thread, Helical Coil (Metric Series) MA1567 Insert, Screw Thread, Helical Coil, Standard Dimensions, Assembly (Metric Series) MA3279, 3280, 3281

  Thread, Dimensions

Inserts - STANLEY® Engineered Fastening

Insert, corrosion resistant Helical Coil Coarse Thread (Inch Series) NASM124651 thru NASM124850 Insert, corrosion resistant Helical Coil Fine Thread (Inch Series) NASM21209 Insert, Screw Thread, Self Locking (Inch Series) NASM33537 Insert, Standard Dimensions, Assembly (Inch Series) NASM8846 Insert, Screw Thread, Helical Coil (Inch Series) MA1565

  Standards, Thread, Inch, Insert

POP Blind Riveting Systems

POP ® The POP ® rivet installation sequence is simple. 1. Place the mandrel of the POP ® rivet into the nosepiece of the setting tool. 2. Insert the POP ® rivet body through the hole of the materials to be fastened. 3. Pull the trigger of the setting tool. The POP ® Rivet body clamps the materials together and expands to form a secondary head on the blind side of the joint.

Hole Sizes for Cut Tapping - STANLEY® Engineered Fastening

- 1 - stanleyengineeredfastening.com Chips Hole Sizes for Cut Tapping These charts are supplied as a recommendation only. Actual sizes may vary depending on application and the material being tapped.

  Size, Tapping, Hole, Hole sizes for cut tapping

Stud, Ferrule & Accessory Catalog

Many studs, pins, anchors, and ferrules are featured to provide the greatest range of possible solutions to your stud welding applications. Bookmarks have been added to make navigation through the catalog quick and easy. Text explanations have been added to clarify some of the potential uses of each stud.

  Catalog, Solutions, Ferrules, Dust, Accessory, Ferrule amp accessory catalog

2020 Stud, Ferrule & Accessory Catalog

2020 Nelson® Stud Welding . Stud, Ferrule & Accessory Catalog . This catalog is designed to be a user-friendly source of information about the Nelson Stud Welding line of studs, anchors, pins, and the standard accessories used to weld them. Many features have been

  Welding, Dust, Nelson, Stud welding, Nelson stud welding

Torx Plus Drive System - STANLEY® Engineered Fastening

TORX PLUS Drive is a drive system designed to ensure optimum torque transmission and, ultimately, required clamp load. With a true 0° drive angle, the TORX PLUS system virtually eliminates the radial forces that can cause stress on fastener recesses. The elliptically-based geometric configuration of the TORX PLUS Drive System maximizes

  System, Transmissions

FLOATING SELF-CLINCHING FASTENERS - PennEngineering

In order for self-clinching fasteners to work properly, the fastener must be harder than the sheet into which it is being installed. In the case of stainless steel panels, fasteners made from 300 Series Stainless Steel do not meet this hardness criteria. It is for this reason that A4 and LA4 400 series fasteners are offered. However, while

  Self, Fastener, Floating, Clinching, Floating self clinching fasteners, Self clinching fasteners