TECH DATA SHEETS - sutch.co.uk

1 Rescue StropThe rear of the PBH 6 incorporatesan integral rescue lanyard sewn tothe adjustable rear D Coated FittingsAll fitings are black powder coated tominimise abrasion wear of thewebbing and to provide superiorcorrosion StitchingGrey contrast stitching is used sothat on inspection, prior to donning,the user can determine the integrityof the Chest StrapThis adjustment area allows the userthe capability of the correct fit of theharness to the individual AreasThe PBH 6 incorporates padded legloops to reduce post fall trauma andhelps to give support to the upper Webbing High strength. High Abrasion Resistance. Resistance to UV, Acids, Alkalis, Oil. Resistance to LiFtiNG & SAFEty LLPNew Road, Sheerness, Kent. England, ME12 1PZ Tel: +(0) 1795 580333 Fax: +(0) 1795 668280 email: tECHNiCAL dAtA SHEEt tdS 09 issue 1 PrOdUCt FEAtUrESPriNCiPAL FEAtUrESPrOdUCtNAmE: BOdyHArNESSdESCriPtiON: tWOPOiNt WitHrESCUEStrOPPrOdUCtCOdE.

2 PBH 6 Anchorage ConnectionFront and rear D attachment Carbon steel fittings black powder or composite fitting leg webbing with two colour body to Weight150kg 361, AS/NZS 1891 The PBH 6 is designed to support the body anddistribute the forces to prevent serious injury andkeep the worker in a safe position ready forrescue in the event of a fall arrest points are clearly marked withan A, the rear D should always be your primaryanchorage, although front D connection ispermitted for fall arrest but is primarily for PBH 6 must only be used in conjunction withan energy absorber or load limiting device,maximum impact force anchorage strength OF USECHECKmAtE LiFtiNG & SAFEty LLPNew Road, Sheerness, Kent. England, ME12 1PZ Tel: +(0) 1795 580333 Fax: +(0) 1795 668280 email: tECHNiCAL dAtA SHEEt tdS 09 issue 1 HArNESS iNSPECtiONdONNiNG A HArNESSOrdEriNG iNFOrmAtiONWEBBiNGEnsure that the webbing is free fromcuts, abrasion, wear and tears.

3 Specialattention should be given to thewebbing under every buckle for rubbingand general that the weave of the webbing iseven and shows no sign of distortion or necking resulting from POiNtSCheck for damage, distortion,cracks or corrosion, any ofthese are deemed a for damage, distortion,cracks or corrosion, any ofthese are deemed a that the label ispresent and readable andthe serial number is for loose or damagedthreads and uneven tidiESLook for damaged or missingtidies, if incomplete they canbe leg and chest harness up by the rear D attachment point, check that thewebbing is not harness as you would chest strap leg straps through andbuckle back to form loops abouteach leg. DO NOT twist or all webbing so that theharness fits comfortably withoutrestricting free movement Adjust rear D so that it isbetween shoulder blades andwithin the users reach. A rear D that is too high or lowwill cause the body to take anundesirable position during a fallarrest situation.

4 (PBH 5 Riggers Five Point shown as an example of the PBH range)Part 06 SCheckrig - Pro Body Harness SmallPBH 06 MCheckrig - Pro Body Harness MediumPBH 06 LCheckrig - Pro Body Harness LargePBH 06 XLCheckrig - Pro Body Harness Extra LargeFor Harness Sizing Chart ask for technical data Sheet tdS 17