Technical Data D3-190I

1 Rating 5 Generallitresin mminmmin Max seawater temperature Crpm rpmrpmkglbPerformanceRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 Crankshaft power 1), 5)kW38738498114123137140140139hp51,68 99,28 114,2 133,3 155 167,3 186,3 190,4 190,4 189 Propeller shaft power 1) (At full load)kW36,48 70,08 80,64 94,08 109,4 118,1 131,5 134,4 134,4 133,4 With reverse gear HS45hp49,61 95,31 109,7 127,9 148,8 160,6 178,9 182,8 182,8 181,5 Propellershaft power at x 2,5kW10182437556589117133132 With reverse gear HS45hp132532507488121159181180 Propellershaft power at x 3kW6121729465783115134133 With reverse gear HS45hp81723396377112157183181 PerformanceRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 Torque at crankshaft 2)

2 Nm259,2 387,3 401,1 389,9 388,8 391,5 384,8 351,8 334,2 323,7lbf ft191286296288287289284259247239 Mean piston speedm/s4,35,66,27,58,79,310,611,812,412 ,7ft/s14,318,320,424,528,530,634,738,740 ,841,8 Effective mean pressure 2)MPa1,362,032,102,042,032,052,011,841,7 51,69psi196,7 293,9 304,4 296,0 295,1 297,2 292,1 267,0 253,7 245,7 Lubricating system4-stroke direct injected, turbocharged and aftercooled diesel engineTechnical data D3-190I1-2-4-5-3 Clockwise4000202020700103800-41005202,40 146,593,23,673,198117,3:1US gallitres0,16,81,804,8 Min oil volume incl.

3 Filters at following inclination:0 0 Number of cylindersNo of valvesFiring orderDisplacement, totalSpecific lubricating oil direction, viewed from the frontRated speed5 BoreStrokeCompression ratio55 Dry weight engine BT227500 Maximum forward inclination:301,275 Max. intermittent side tilt while running:Idling speedUS galMax oil volume incl. filters at following inclination:Max. intermittent backward tilt while running:g/kWhlitresPropeller selection range 1) ISO 3046, fuel temp 40 C. ISO 8665 (=SAE J 1228=ICOMIA 28-83)2) At power according to 1).

4 3) If reverse gear is used, 4% in heat rejection will be added for its oil ) Acc. to ISO 37445) At installed back pressureRating 5 Technical data D3-190 IFuel systemRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 Specific fuel consumption 2)g/kWh228217210209216213221228234239lb/ hph0,369 0,352 0,34 0,339 0,35 0,345 0,358 0,369 0,379 0,387 Fuel consumption at prop. load x 2,5l/h35610151725343940US gal/h0,71,31,62,63,94,66,58,910,410,5 Fuel consumption at prop. load x 3l/h 2348121523333940US gal/h0,40,91,22,03,34,06,08,710,410,6 Fuel consumption at full loadl/h10192125293136383940US gal/h2,75,05,66,57,88,39,610,110,410,5 Intake and exhaust systemRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 C397443436447500500531527534538 F7478298178379329329889819931000kPaMax30 psi4,4kPaMin25psi3,6m /min9, charge prop load exp ,74,93,37,49,19,310,619,019,9m /min21.

5 2 Cooling systemRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 Sea water pump /h7,7foot /h272 Fresh water circulation pump flowm /h9,4foot , start open at C FThermostat, fully open at C FEmissionsRatingr/min1400 1800 2000 2400 2800 3000 3400 3800 4000 4100 Smoke at prop. load x 2,55*BSU0,20,20,10,30,60,71,21,21,4 Smoke at prop. load x 5,0*BSU0,20,20,10,30,60,71,21,21,4955555 55203 Exhaust temperature at the exhaust pipe connecting flange after the turbo content engine, incl.

6 Heat exchangers and air cooler8,22,1717680*NB.! BSU are calculated values. Measured values are acc. to ISO 10054 in FSN units55555 Permitted back pressure in the exhaust line at rated speed.(Installed back pressure)55 Exhaust gas flowEngine air consumption at 25oC / 77oFatmospheric pressure 100kPAand relative humidity 30%.5 1) ISO 3046, fuel temp 40 C. ISO 8665 (=SAE J 1228=ICOMIA 28-83)2) At power according to 1).3) If reverse gear is used, 4% in heat rejection will be added for its oil ) Acc. to ISO 37445) At installed back pressur