Transcription of Technical Data Sheet - Granulat
1 Melt Flow Rate (190 kg) Flow Rate (190 C/5 kg) Melt Flow Rate (190 kg) Point112 Brittleness temperature< 75 Vicat softening point (1 kg)93g/10minISO 1133g/10minISO 1133g/10minISO 1133g/cm3 ISO 1183 CASTM D 746 CISO 306/ATensile stress at yield MD10 Tensile stress at yield TD11 Tensile stress at break MD25 Tensile stress at break TD25 Elongation at break MD400 Elongation at break TD5501% Secant modulus MD1601% Secant modulus TD180 Elmendorf tear resistance MD25 Elmendorf tear resistance TD25 Impact resistance F50 (Dart Drop Test)290 Dynamic coefficient of friction (COF)
2 > , 45 30 Recommended film thickness60 250 Main PropertiesTest MethodValueValueTest Method November 2014 Pag 1/2 MPaISO 527 3 MPaISO 527 3 MPaISO 527 3 MPaISO 527 3%ISO 527 3%ISO 527 3 MPaISO 527 3 MPaISO 527 3N/mmISO 6383 2gISO 7765 1/A ISO 8295%ISO 14782%ASTM D 2457micron This document is constituted of 2 6383 2 Resin PropertiesUnitFilm Properties *UnitRiblene FC 20 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 20 is characterised by a high melt strength leading to a good bubble stability during manufactured by Riblene FC 20 are easily heat shrinkable and characterised by optimum mechanical ApplicationsRiblene FC 20 is recommended for the production of greenhouse film, heavy duty shrink film and industrial data SheetLow density polyethylene(*) Typical value for a film extruded with BUR 1:3, thickness 70 Km.
3 Actual properties are typical and may vary depending upon operating conditions and additive 20 RIBLENE Riblene is a registered trademark of versalis CInternal methodversalis Boldrini, 120097 Milanese, ItaliaTel. +39 02 +39 02 Boldrini, 120097 Milanese, ItaliaTel. +39 02 +39 02 International SA succursale fran aisePort 4531 Route des Dunes BP 59F 59279 Mardyckversalis Taliercio, 1446100 Mantova, ItaliaTel. +39 0376 305667 Fax +39 02 52043 November 2014 Pag 2/2 Technical SERVICEHEADQUARTERP rocessing notesRiblene FC 20 is easily processable using blown film technology.
4 Melt temperature should be between 180 C and 220 C. Recommended thickness: 60 250 and HandlingRiblene FC 20 is supplied in pellet form. This material may readily be conveyed and bulk fed through equipment designed for conventional pelletised polyethylene resin, provided the equipment is designed to prevent accumulation of the fines and dust particles that are contained in all polyethylene resins. These fines and dust particles can, under certain conditions, pose an explosion hazard. We recommend that the conveying system used be equipped with filters of adequate size, operated and maintained in such a manner to ensure that no leaks develop and earthed adequately.
5 We further recommend that good housekeeping should be practised throughout your product should be stored in dry conditions at temperatures below 50 C and protected from storage can initiate degradation which results in odour generation, colour changes and can have negative effects on the physical properties of the product. Before using this product it is recommended to read and understand the relevant Safety data the versalis sales office nearest to you regarding availability and your specific application Contact StatusRiblene FC 20 complies with the rules and regulations of the European Union, as well as other countries, regarding the use of plastic materials in food contact applications.
6 Certificates of compliance are available upon : please consult the relevant safety data Sheet for more detailed information. The information and data presented herein are to the best of our knowledge true and accurate but no warranty or guarantee, expressed or implied, is made nor is any liability accepted with respect to the use of such information and is available to provide the guaranteed values for each product on demand.
