Technical Data Sheet Shell Corena S3 R 32

1 Technical data SheetShell Corena S3 R 32 Long life Improved Efficiency Premium rotary Air compressor OilShell Corena S3 R is a premium quality air compressor oil designed to deliver high performance lubrication ofrotary sliding vane and screw air compressors. It uses an advanced additive system to provide excellentprotection and performance for compressors running with oil maintenance intervals of 4,000 hours and up to6,000 hours under certain , Features & BenefitsLong oil life Maintenance saving Shell Corena S3 R is capable of providing oil maintenanceintervals of 4,000 hours (where allowed by manufacturers)even when operating at maximum discharge temperaturesof up to 1000C.

2 This may be extended to up to 6,000 hoursunder certain is formulated to help:Resist formation of carbon deposits in sliding vane slots invane compressors Resist formation of deposits on rotating components inscrew compressors. Resist thermal breakdown and deposit formation tomaintain excellent internal surface cleanliness particularlyin oil/air separator and coalescer systems. The exact oil maintenance interval will depend on intake airquality, duty cycle and ambient conditions. For hot andhumid type climates as found in the Asian and Pacificregions, the lower oil drain period of 4,000hrs isrecommended (also consult OEM recommendations).

3 Outstanding wear protection With many years of successful application, Shell Corena S3R helps provide effective protection of internal metalsurfaces from corrosion and contains an advanced ashless anti-wear system to helpprolong the life of critical parts such as bearings and system efficiency Air release and prevention of foaming are criticalperformance characteristics in a compressor oil, ensuringreliable start-up and continuous compressed air Corena S3 R is designed to provide rapid air releasewithout excessive foaming to give trouble-free operationeven under cycling addition, Shell Corena S3 R has excellent waterseparation properties to help ensure continuous efficientoperation of the compressor even in the presence of ApplicationsRotary sliding vane and screw air compressors Shell Corena S3 R is suitable for use in oil-flooded/ oilinjected single or two-stage rotary vane or screw , Approvals & RecommendationsISO 6743-3.

4 2003(E) L-DAJ For a full listing of equipment approvals andrecommendations, please consult your local Shell & MiscibilitySeal Compatibility Shell Corena S3 R oils are compatible with seal materialsspecified for use with mineral 1 of 3 Corena S3 R 32, v Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell 's specification,variations in these characteristics may occur. PropertiesMethodShell Corena S3 R 32 ISO Viscosity GradeISO 344832 Kinematic Viscosity@400 Cmm2/sASTM D44532 Kinematic Viscosity@1000 Cmm2/sASTM IndexISO 2909102 Density@150 Ckg/m3 ASTM D1298864 Flash Point (COC)

5 0 CASTM D92218 Air ReleaseminutesASTM D34272 RPVOT minutesASTM D2272700 FZG TestLS FailCEC-L-07-A-9511 Pour Point0 CASTM D97-30 Water Separability@540 CminutesASTM D140115 Health, Safety & EnvironmentHealth and Safety Shell Corena S3 R is unlikely to present any significant health or safety hazard when properly used in the recommendedapplication and good standards of personal hygiene are contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety data Sheet , which can be obtained the Environment Take used oil to an authorised collection point.

6 Do not discharge into drains, soil or InformationAdvice Advice on applications not covered here may be obtained from your Shell 2 of 3 Corena S3 R 32, v 3 of 3 Corena S3 R 32, v