Technical Data Sheet Shell Omala S4 GXV 220 - …

1 Technical data SheetShell Omala S4 GXV 220 Extra Life and Protection Special Applications Advanced Synthetic Industrial Gear OilShell Omala S4 GXV 220 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG,offering outstanding lubrication performance under severe operating conditions, including reduced friction, longservice life, high resistance to micro-pitting for optimal gear protection and superb compatibility with , Features & BenefitsLong oil life - maintenance saving Shell Omala S4 GXV 220 is formulated using an advancedadditive system in combination with specially selectedsynthetic base fluids to provide outstanding resistance tobreakdown over long duration and/or high Omala S4 GXV 220 can operate successfully at bulktemperatures up to 1200C.

2 Shell Omala S4 GXV 220 offersthe potential to significantly extend service intervalscompared to conventional industrial gear wear and corrosion protection Shell Omala S4 GXV 220 is formulated to have excellentload carrying capacity and micro-pitting performanceproviding long component life even under shock loadingconditions. These features provide benefits over mineraloil-based products in terms of gear and bearing Omala S4 GXV 220 also has excellent corrosionprotection, even in the presence of contamination by waterand system efficiency Shell Omala S4 GXV 220 can help maintain or enhance theefficiency of industrial gear systems through improved lowtemperature performance and lower friction in comparisonto mineral oil-based products.

3 This provides betterlubrication at low start-up ApplicationsGear motor systems and other inaccessible installations Shell Omala S4 GXV 220 is particularly recommended forcertain systems where extra long life is required,maintenance is infrequent or systems are compatibility with seals, paints and sealants Recommended for industrial reduction gear systems using awide range of seals, including nitrile rubber and fluoro-elastomers. Meets the demanding requirements of Siemensfor Flender gearboxes and gear industrial gear systems Recommended for industrial reduction gear systemsoperating under severe operating conditions, such as highload, very low or elevated temperatures and widetemperature applications Shell Omala S4 GXV 220 is suitable for lubrication ofbearings and other components in circulating and splash-lubricated highly loaded worm drives the Shell Omala W seriesoils are recommended.

4 For automotive hypoid gears, theappropriate Shell Spirax Oil should be 1 of 2 Omala S4 GXV 220, v Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell 's specification,variations in these characteristics may occur. Specifications, Approvals & RecommendationsISO 12925-1 Type CKD ANSI/AGMA 9005-F16 Siemens AG Omala S4 GXV ISO 150 680 are approvedby Siemens AG for use in Flender gearboxes and gearmotors. DIN 51517-3 (CLP) China National Standard GB 5903-2011 CKD AIST (US Steel) Req.

5 No. 224 For a full listing of equipment approvals andrecommendations, please consult your local Shell TechnicalHelp Omala S4 GXV 220 Kinematic Viscosity@400 Cmm2/sASTM D445220 Kinematic Viscosity@1000 Cmm2/sASTM D44530 Viscosity IndexASTM D2270171 Flash Point (COC)0C minimumASTM D92240 Pour Point0 CASTM D97-42 Density@150 Ckg/m3 ASTM D4052864 Four Ball EP Weld loadkg minimumASTM D2783250 FZG Load Carrying Testfailure load stageminimumA/8,3/9014 Health, Safety & EnvironmentHealth and Safety Omala S4 GXV 220 is unlikely to present any significant health or safety hazard when properly used in the recommendedapplication and good standards of personal hygiene are contact with skin.

6 Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety data Sheet , which can be obtained the Environment Take used oil to an authorised collection point. Do not discharge into drains, soil or InformationChange over procedure Omala S4 GXV 220 is based on synthesized hydrocarbon fluids and is compatible with petroleum mineral oil-basedindustrial gear lubricants - no special change-over procedure is necessary.

7 However, to achieve the complete benefit ofOmala S4 GXV 220, it should not be mixed with other is also advisable to ensure that oil systems are clean and free from Advice on applications not covered here may be obtained from your Shell 2 of 2 Omala S4 GXV 220, v