Technical Data Sheet Shell Spirax S6 ATF A295

1 Technical data SheetShell Spirax S6 ATF A295 Maintenance Saving Enhanced Efficiency Synthetic Extended Drain Heavy Duty Automatic Transmission FluidShell Spirax S6 ATF A295 Oil is a fully synthetic, heavy-duty automatic transmission fluid which is specificallydesigned and approved for use in transmissions requiring Allison TES-295 fluids. Spirax S6 ATF A295 isapproved for extended service intervals and remains stable even under severe operating , Features & BenefitsLong enhanced protection Long equipment life Viscosity Control : Spirax S6 ATF A295 incorporates latestsynthetic base fluid technology and mechanically stableViscosity index improver technology to help ensure theViscosity of the oil remains constant over the complete oildrain, thus helping to ensure consistent lubrication and oilfilm thickness required to ensure protection of the gears,bearings and other mechanical fluid life maintenance saving The exceptional Oxidation resistance of Spirax S6 ATFA295 helps resist formation of deposits to ensure longerfluid life and better fluid performance under fluid life demonstrated in full scale long durationtransmission efficiency Extremely high frictional stability, excellent viscometriccontrol and durability helps ensure consistent shifting andpower transfer Characteristics.

2 This helps provide smoothshifting and helps maintain the fuel efficient operation of low temperature properties help ensure efficienttransmission operation even under cold climate anti-foam and filterability Characteristics to helpensure efficient and effective lubrication and hydrauliccontrol system performance within the ApplicationsAllison Medium/Heavy Duty Automatic Transmissions Spirax S6 ATF A295 was developed to meet the extendeddrain requirements of late model medium and heavy dutyAllison automatic transmissions. It is particularly suitable fortransmissions requiring a TES-295 type S6 ATF A295 is recommended for use intransmissions found in the following applications:Municipal fleets Vans, school buses Buses and Coaches Emergency vehicles Commercial vehicles and trucks Motor-homes Heavy duty pickup trucks Spirax S6 ATF A295 can also be used in some ZF and Voithheavy duty transmissions as well as those previouslyserviceable by Dexron III and Mercon fluids, and isparticularly suited to mixed fleet operations.

3 Specifications, Approvals & RecommendationsApproved:Allison TES-295 AN-121008 Allison TES-468 AN-121008 Suitable for use in applications calling for:Former Dexron-III applications Voith DIWA transmissions ZF TE-ML 14A, 14B, 14C MAN 339 Z3 Mercedes-Benz Sheet Caterpillar AT-1 For a full listing of equipment approvals andrecommendations, please consult your local Shell TechnicalPage 1 of 3 Spirax S6 ATF A295, v 2 of 3 Spirax S6 ATF A295, v physical Characteristics These Characteristics are typical of current production. While future production will conform to Shell 's specification,variations in These Characteristics may occur. PropertiesMethodShell Spirax S6 ATF A295 Kinematic Viscosity@1040 FcStASTM D44536 Kinematic Viscosity@2120 FcStASTM IndexASTM D2270181density@150 Ckg/lASTM Point (COC)0 FASTM Point0 FISO , Safety & EnvironmentHealth and Safety Shell Spirax S6 ATF A295 is unlikely to present any significant health or safety hazard when properly used in therecommended Application and good standards of personal hygiene are contact with skin.

4 Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety data Sheet , which can be obtained the Environment Take used oil to an authorized collection point. Do not discharge into drains, soil or InformationAdvice Product recommendations for applications and specifications not covered here may be obtained from your 3 of 3 Spirax S6 ATF A295, v