TECHNICAL DETAILS: 3000 MULTI-POINT LOCK - …

1 TECHNICAL details : 3000 MULTI-POINT LOCKJAMB AND MULL MORTISE FABRICATION DETAILI-BEAM CONSTRUCTIONBEVELED LATCHESSTRIKE PLATES WITH ROLLERS1" WIDE FACEPLATE3000 SERIES LOCKDOOR HEIGHTSC/L of strike mounting screws are to match with C/L of Lock and "2-3/16"One-piece design has a full-length reinforced I-Beam for enhanced door panel in three ramp to mate with rollers on strike plates to draw the panel into view - 1/8" THRU1 - 1/8" THRU1 - 5/8"1-7/8"1/4" R1/4" R1 /4 "1 /4 "4-1/64"4-1/64"1 - 3/4" THRU1 - 3/4" THRU2-5/8"2-5/8"9/32"17/32"7/8"1-1/8"For Single Door and Active Door Of Double DoorC/LC/LVIEW AANot to Scale1/8"For 1-3/4" doorFor 2-1/4" doorAAAAJAMB AND STILE FABRICATIONTECHNICAL details : 3000 MULTI-POINT LOCK5/8"21"6" 3" 24-5/16"34"-37"Ty p . t oBottomof Door1/8" Reveal Typical4 - 1/64 10/0 53-7/32"9/0 43-5/32"8/0 33-3/32"6/8 23-1/32"10/0 51-3/16"9/0 41-1/8"8/0 31-1/16"6/8 21"10/0 85-11/16"9/0 75-5/8"8/0 65-9/16"6/8 55-1/2"Tolerances+1/32"-0"Note TwoCrossbore Sizes: 1-11/16" for Horizon and all Emtek2-1/8" for all BB & CCNot to ScaleBCABC1"1/2"2"13/16"1-11/16" Minimum1/16" of C/L on 1-3/4" Stile Thickness+_3-1/4"JambStileStileStile Detail1/2"2-3/4"1- 3 /4 "1-7/8"2"1/2" "4-3/8"8-11/16"4-3/8"1-7/8"3-1/4"1- 3 /4 "13-13/16"Note: 2-3/8"Standard2-3/4"OptionalC/LSym about C/LTECHNICAL details : 3000 MULTI-POINT LOCKHANDINGFINISHESFace Plate Finishes: Strike Plate Finishes: Victorian BronzeSatin Stainless SteelBright BrassVictorian BronzeSatin Stainless SteelBright BrassBlackSatin Nickel8817 W.

2 Market St., Colfax, NC information contained in this document is the confidential and proprietary information and trade secrets of Endura Products, Inc. Any disclosure, use or dissemination of such information without the express written permission of Endura Products, Inc. is strictly prohibited. Endura Products, Inc. also owns any and all intellectual property rights embodied in such information, including patent rights, copyrights, and trademark rights, and no license of any intellectual property right is intended, nor should any license be implied, as a result of the receipt of this under one or more of the following Patents 5,524,941; 5,524,942; 7,753,418; 8,182,002 Rev.