Example: dental hygienist

Technical Specifications - Sparling Instruments

DESCRIPTIONThe Sparling /OVAL Flowmate is a postive displacementflowmeter designed for the measurement of very small flowrates in applications requiring high accuracy. It is an idealflow measurement device for various fuels like kerosene,diesel, fuel oil, etc. Units are available for remote registrationand totalization using either a reed switch or pulse simple unique construction enables the Sparling /OVAL gear meter to measure various fuels with the highest accuracyfor accountability and applications include: Fuel oil monitoring, consumption and control (kerosene,fuel oil, diesel, etc.) to engines, boilers, test stands, R & Dlabs, etc. Chemical additions in process control Lubrication oil to turbines, pumps and other equipmentSTANDARD FEATURES Sizes include1/8" and 1/4" Aluminum or SST body chambers 1% of reading accuracy or better Carbon steel, resin coated gears can apply for mostliquids Reed Switch or MR sensor for remote registration ortotalization Scaled or u

DESCRIPTION The Sparling/OVAL Flowmate is a postive displacement flowmeter designed for the measurement of very small flow rates in applications requiring high accuracy.

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of Technical Specifications - Sparling Instruments

1 DESCRIPTIONThe Sparling /OVAL Flowmate is a postive displacementflowmeter designed for the measurement of very small flowrates in applications requiring high accuracy. It is an idealflow measurement device for various fuels like kerosene,diesel, fuel oil, etc. Units are available for remote registrationand totalization using either a reed switch or pulse simple unique construction enables the Sparling /OVAL gear meter to measure various fuels with the highest accuracyfor accountability and applications include: Fuel oil monitoring, consumption and control (kerosene,fuel oil, diesel, etc.) to engines, boilers, test stands, R & Dlabs, etc. Chemical additions in process control Lubrication oil to turbines, pumps and other equipmentSTANDARD FEATURES Sizes include1/8" and 1/4" Aluminum or SST body chambers 1% of reading accuracy or better Carbon steel, resin coated gears can apply for mostliquids Reed Switch or MR sensor for remote registration ortotalization Scaled or unscaled pulse output Metric or NPT end connections Special SST body and rotors Low pressure drop Viscosity up to 1000 cpPRINCIPLE OF OPERATIONEach meter is equipped with two OVAL shaped gears whichrotate when fluid passes through a fixed measuring of gears displaces a fixed volume of fluid.

2 The sensorpicks up gear rotation, which is proportional to fluid volumeand flow meter is designed to minimize the slippage betweengears and measuring chamber body. As a result, the OVAL gear meter is less affected due to liquid viscosity and lubricitythan other flowmeter FlowmeterTechnical SpecificationsSparling/Oval Flowmate is manufactured by Oval Corporation in SPECIFICATIONSMETER:Accuracy: 1% of readingProcess Fluid:Clean liquidMax. Working Temp:-4oF to 176oF (-20oC to 80oC)Max. Working Pressure:150 psiFlow Ranges:See TableConstructionHousing: Aluminum or stainless steelMaterial:Rotor: Special resin or SST (optional)Connections:NPT threaded adapters:R 3/8 - " NPT femaleR 1/2 - " NPT femalePULSE GENERATOR:Solid State Hall Effect SwitchDetection Method:MR sensorResponse Frequency:1,000 Hz maximumAmbient Temperature:-4oF to 176oF (-20oC to 80oC)Output Pulse:Voltage pulse: 0/1= less to (at load resistance morethan 10 k ohm)Wave form ratio (%): H40< x100<50 = H+L = - VDC L H VDCP ower supply:12 to 24 Vdc, 10%Power Consumption:7mA ( ) Switch (option)Max.

3 Voltage:100 VAC; 100 VDCC ontact Capacity:10W or Durability:250 VDC RMS; 1 Pulse:Two wire contact pulse (unfactored)Ambient Temperature:-4oF to 185oF (-20oC to 85oC)**Note: Application is limited by meter temperature standard of -4oF to 176oF (-20oC to 80oC)FLOW RANGE ACCURACY 1%HOW TO ORDER FLOWMATEBase Model NumberLSF Sparling /Oval M-IIISize40 Rp 1/8" (6mm) N/A in all Stainless Steel C option41 Rp 1/8" (6mm)45 Rp 1/4" (8mm)Material of Metering elementsC 316 Stainless Steel Body & RotorL Aluminum Body & Special Resin RotorP 316 Stainless Steel Body & Special Resin RotorConnection0 No connector8 w/connector (option)GenerationM MR sensorR Read switch (option)Kind of Pulse1 Unscaled pulse2 Scaled pulse (MR sensor only)LSF __ __ __ __ __4097 N.

4 Temple City Blvd. Box 5988 El Monte, CA USA 91731Ph (626) 444-0571 Fx (626) 452-0732 Internet: E-mail: Printed in 2002 Sparling Instruments , Inc. All rights reservedPDS-LSFdkdkdkdkdDimensionModel LSN40, 41 Model LSN45A1-9/16" (40mm)2" (50mm)B1-9/16" (40mm)2" (50mm)C1-3/8" (35mm)2" (50mm)D1-1/16" (27mm)1-1/4" (32mm)METER BODYUnit in Gallons per Hour Meter More than .3cp More than .8cp More than 2cp More than 5cpMore than 5cpRotor Size & less than .8cp & less than 2cp & less than 5cp & less than 200cp & less than .1 .3 .7 SteelItemDescriptionMeter Size404145 Parallel internal threads 1/8"1/8" (6mm)1/4" (8mm)Accuracy 1% RDOperating temp.

5 Range-4OF 176 OFMax. operating psiBodyL C LC CLC CMat'l.*RotorsK K KK CK K C*MaterialC: Stainless steel (Body:SUS316, Rotor:SUS316L(Sintered metal))L: Aluminum + Alumite treatmentK: Special resinMR Sensor - See Specifications on front pageMR Sensor Output Pulse UnitScaled PulseUnscaled PulseSize PulseFreq@Max Meter Factor Freq@Max Max FlowUnit mL/P Flow rate Hz mL/P Flow rate Hz rate Switch (Option) - See Specifications on front pageReed Switch Output Pulse UnitUnscaled PulseSizeMeter FactorFreq.@MaxMax Flow ratemL/PFlow rate = mili-liter/pulseMETER ERROR AND PRESSURE DROPPULSE GENERATORDIMENSION DRAWINGS


Related search queries