Transcription of TFM Roll-On Roll-Off
1 32 Main Road / PO Box 1200 Clayville Ext 4 Olifantsfontein, 1665 Tel : 011 237 6900 Fax : 011 316 4224 INDUSTRIES(Pty)LtdTFM Roll-On Roll-Off This equipment is designed for more efficient use of trucks and drivers where loading and waiting times are critical factors. It is the ideal economic answer for operations where bulk loads accumulate over a period at different loca- tions. One truck fitted with LR Series equipment can service ten to fifteen sites per day depending upon distance and commodity. The equipment is manufactured in South Africa and based upon many years of experience in this field. The design uses a single double acting hydaulic cylinder for lifting, lowering and tipping. On the larger LR16 unit, a rear stabili- sing system is incorporated at the rear of chassis.
2 The system can be used in conjunction with a trailer, which can be loaded/unloaded by the Roll-On Unit. Gvm (Kg) 16 000 kg 26 000 kg Wheelbase (mm) 4 400 (Typ.) 4 500 (Typ.) CA Chassis (mm) 4 100 (Typ.) 4 200 (Typ.) type handling frame with optional stakes, drop stanchions, etc. 2. Body and Crane Combination 3. 8m3 Open container with optional fixed or dropsides and double acting tail gate 4. 15m3 Open Container with same options as above 5. 30m3 Open fixed side container with double rear doors. 6. Palletized portable generator, compressor, power pack, etc. 7. Compaction container for industrial waste, cardboard, etc. 8. Handling frame for portable building, site huts, etcLR Series Container Handling EquipmentCHASSIS REQUIREMENTS LR9 LR18 Equipment Mass (kg) 2 050 kg 3 100 kg Handling Capacity (kg) 9 000 kg 16 000 kg Cycle Time (lift and lower) 56 seconds 79 secondsEQUIPMENT DETAILS LR9 LR18 9.
3 Storage tank with optional rear Portable dock packer for industrial Vacuum tank with optional rear door and hose Sludge Pressure tank for bulk Special container for bulk grain and other farming products15. Pallet type handling frame for forestry
