Example: biology

The Bose Acoustimass 3 Series IV Speaker System

The bose Acoustimass 3 Series IV Speaker SystemOwner s GuideOctober 22, 22, 2001 InformationDeclarationof ConformityWe, the offerer: bose Corporation, The MountainFramingham, MA 01701-9168 USAacknowledge our sole responsibility, that the product:Kind of equipment:LoudspeakersType designation: Acoustimass 3 Speaker Systemin accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,is in compliance with the following norm(s) or document(s):Technical regulations:EN50081-1, EN50082-1 Accredited by bose Corporation5 June 1999 bose Products ,Nic MerksNijverheidstraat 8, 1135 GE Edam,Vice President, bose EuropeThe NetherlandsManufacturer s authorized EU representativeThank youWe appreciate your choice of the bose Acoustimass 3 Speaker System .

• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected. • Consult the dealer or an experienced radio/TV techni-cian for help. Note: Unauthorized modification of the receiver or ...

Tags:

  Series, Receiver, Antenna, Speaker, Bose, Acoustimass, The bose acoustimass 3 series iv speaker

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of The Bose Acoustimass 3 Series IV Speaker System

1 The bose Acoustimass 3 Series IV Speaker SystemOwner s GuideOctober 22, 22, 2001 InformationDeclarationof ConformityWe, the offerer: bose Corporation, The MountainFramingham, MA 01701-9168 USAacknowledge our sole responsibility, that the product:Kind of equipment:LoudspeakersType designation: Acoustimass 3 Speaker Systemin accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,is in compliance with the following norm(s) or document(s):Technical regulations:EN50081-1, EN50082-1 Accredited by bose Corporation5 June 1999 bose Products ,Nic MerksNijverheidstraat 8, 1135 GE Edam,Vice President, bose EuropeThe NetherlandsManufacturer s authorized EU representativeThank youWe appreciate your choice of the bose Acoustimass 3 Speaker System .

2 It will provide youwith many years of listening enjoyment. Your System features new third generationAcoustimass cube speakers, a product of the continuous research and development at BoseCorporation. These cube speakers deliver more lifelike sound and better overall performance,yet are smaller than their read this owner s guideThe setup and operation of your Acoustimass 3 Speaker System is significantly different fromother speakers. Please take the time to read this owner s guide carefully. It will help you setup and operate your System properly and enjoy all of its features. Remember to save yourowner s guide for future 22, 2001aImportant Safety Instructions1. Read these instructions for all componentsbefore using this Keep these instructions for future Heed all warnings on the product and in theowner s Follow all Do not use this apparatus near water ormoisture Do not use this product near abathtub, washbowl, kitchen sink, laundry tub, in awet basement, near a swimming pool, or any-where else that water or moisture are Clean only with a dry cloth and as directedby bose Corporation.

3 Unplug this product fromthe wall outlet before Do not block any ventilation in accordance with themanufacturer s instructions To ensurereliable operation of the product and to protect itfrom overheating, put the product in a positionand location that will not interfere with its properventilation. For example, do not place the producton a bed, sofa, or similar surface that may blockthe ventilation openings. Do not put it in a built-insystem, such as a bookcase or a cabinet that maykeep air from flowing through its Do not install near any heat sources, suchas radiators, heat registers, stoves or otherapparatus (including amplifiers) that pro-duce Do not defeat the safety purpose of thepolarized or grounding-type plug.

4 A polar-ized plug has two blades with one widerthan the other. A grounding-type plug hastwo blades and a third grounding prong. Thewider blade or third prong are provided foryour safety. If the provided plug does not fitin your outlet, consult an electrician forreplacement of the obsolete Protect the power cord from being walkedon or pinched, particularly at plugs, conve-nience receptacles, and the point wherethey exit from the Only use attachments/accessories speci-fied by the Use only with the cart, stand, tripod,bracket or table specified by themanufacturer or sold with theapparatus. When a cart is used,use caution when moving thecart/apparatus combination toavoid injury from Unplug this apparatus during lightningstorms or when unused for long periods oftime to prevent damage to this Refer all servicing to qualified service person-nel.

5 Servicing is required when the apparatushas been damaged in any way: such as power-supply cord or plug is damaged; liquid hasbeen spilled or objects have fallen into theapparatus; the apparatus has been exposed torain or moisture, does not operate normally, orhas been dropped Do not attempt to service thisproduct yourself. Opening or removing covers mayexpose you to dangerous voltages or other call bose to be referred to an authorizedservice center near To prevent risk of fire or electric shock, avoidoverloading wall outlets, extension cords, orintegral convenience Do not let objects or liquids enter the product as they may touch dangerous voltage points orshort-out parts that could result in a fire or See product enclosure for safety about products thatgenerate electrical noiseIf applicable, this equipment has been tested and foundto comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC rules.

6 These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interfer-ence to radio communications. However, this is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interfer-ence to radio or television reception, which can bedetermined by turning the equipment off and on, you areencouraged to try to correct the interference by one ormore of the following measures: Reorient or relocate the receiving antenna . Increase the separation between the equipment andreceiver.

7 Connect the equipment to an outlet on a differentcircuit than the one to which the receiver is connected. Consult the dealer or an experienced radio/TV techni-cian for : Unauthorized modification of the receiver or radioremote control could void the user s authority to operatethis product complies with the Canadian ICES-003 ClassB 22, 2001 Safety InstructionsAntenna groundingExample of antenna grounding as per National ElectricalCode, ANSI/NFPA to CATV System installerThis reminder is provided to call the CATV systeminstaller s attention to Article 820-40 of the NEC (of USA)that provides guidelines for proper grounding. In particu-lar, it specifies that the cable ground shall be connectedto the grounding System of the building, as close to thepoint of cable entry as is Use proper power sources Plug the product intoa proper power source, as described in the operatinginstructions or as marked on the Avoid power lines Use extreme care wheninstalling an outside antenna System to keep fromtouching power lines or circuits, as contact withthem may be fatal.

8 Do not install external antennasnear overhead power lines or other electric light orpower circuits, nor where an antenna can fall intosuch circuits or power Ground all outdoor antennas If an externalantenna or cable System is connected to thisproduct, be sure the antenna or cable System isgrounded. This will provide some protection againstvoltage surges and built-up static 810 of the National Electrical Code ANSI/NFPA No. 70 provides information with respect toproper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors,location of antenna -discharge unit, connection togrounding electrodes, and requirements for theground electrode.

9 Refer to the antenna groundingillustration on this lead in wireAntenna discharge unit(NEC Section 810-20)Grounding conductors(NEC Section 810-21)Power service groundingelectrode System (NEC ART 250, Part H)Ground clampsGround clampElectric serviceequipment 2001 bose Corporation,The Mountain, Framingham, MA01701-9168 USA255805 AM 22, 20013 ContentsFor your recordsSerial numbers are located on the connection panel of the Acoustimass number: _____Dealer name: _____Dealer phone: _____ Purchase date: _____We suggest you keep your sales slip and warranty card together with this owner s to find ..Setting Up Your Acoustimass 3 Speaker System .. 4 Before you begin ..4 Unpacking the System .

10 4 Selecting locations for the cube speakers .. 4 Selecting a location for the Acoustimass module .. 5 Using the cables correctly .. 5 Connecting the cube speakers to the Acoustimass module .. 6 Connecting the Acoustimass module to your receiver or amplifier .. 6 Checking your connections .. 7 Operating Your Acoustimass Speaker System .. 8 Checking the System .. 8 Understanding automatic System protection .. 8 Maintaining Your Acoustimass Speaker System .. 9 Cleaning your speakers .. 9 Troubleshooting .. 9 Technical information ..10 Warranty period ..10 Customer service .. 10 bose Corporation .. Inside back cover4 October 22, 2001 you beginThank you for purchasing the bose Acoustimass 3 Speaker System .


Related search queries