Threaded Fittings - Lincoln Industrial

1 Lubrication Fittings & Accessories Threaded Fittings On the straight and angle Fittings , the ball check end or the greasing end is heat treated. The spin-drive and drive-type angle Fittings are entirely heat treated. All Fittings are zinc plated and have a supplemental coating. " - 28 Thread (Straight & Taper). This type of thread is used mostly on cars and light trucks. The SAE-LT is a thread that conforms to the Society of Automotive Engineers lubrication Fittings thread specification. No. 5010 No. 5527. *No. 5010-1 " -28 Part A B C D E F G.

2 " -28 Taper Thd. 2A Thd. No. (SAE-LT). 5527 / / / .250 / . 5010 / / / .260 / . * 5010-1 / / / .260 / . 5013 / / / .260 / . No. 5013 No. 5014. 5014 / / / .260 / . " -28 Taper Thd. " -28 Taper Thd. (SAE-LT) (SAE-LT). 5210 / / / .260 / 45 / / 5410 / / / .260 / 90 / / 700396 / / / .260 / 65 / / * Not illustrated. Same as No. 5010 but without ball Check. No. 5210 No. 5410. " -28 Taper Thd. " -28 Taper Thd. (SAE-LT) (SAE-LT). No. 700396. " -28 Taper Thd. (SAE-LT). 4. Lubrication Fittings & Accessories Threaded Fittings " Pipe Thread The " pipe Threaded Fittings are constructed for additional strength.

3 This type of fitting is popular for use in the construction and agricultural industry and large Industrial machinery. Part A B C D E F G. No. 5000 No. 5003. No. " Spec. " Extra Short Spec. Short 5000 / / / .400 / . 5003 1 / / / .400 / . 5009 2 / 2 / / .400 / . 5505 1 / / / .480 / . 5200 / / / .400 / 45 / / 5300 / / / .400 / 65 / / 5308 1 / / / .400 / 65 / / No. 5009 No. 5505. " " 5400 / / / .400 / 90 / / Spec. Short No. 5200 No. 5300. " " Spec. Short Spec. Short No. 5308 No. 5400. " " Spec. Short Spec. Short 5. Lubrication Fittings & Accessories Threaded Fittings " Pipe Thread Part A B C D E F G.

4 No. 5050 / / / .535 / . No. 5050. " 5350 1 / / / .535 / 65 / / No. 5350. " Spec. Extra Short Metric Fittings 6mm, 8mm, 10mm Part A B C D E F G. No. mm mm No. 5181. 10 mm x 1 * 5175 / / 7 6 mm x 1 . * 5176 / / 9 45 / / * 5177 / / 9 90 / / * 5178 / / 9 8 mm x 1 . No. 5182 * 5179 / / 9 45 / / 10 mm x 1. * 5180 / / 9 90 / / 5181 / / 11 10 mm x 1 . 5182 / / 11 45 / / 5183 / / 11 90 / / No. 5183. 10 mm x 1 * Not illustrated. 6. Lubrication Fittings & Accessories Spin-Drive Fittings Spin-Drive Spin-Drive (thread forming) Fittings have special tapered drive threads for fast production line installation in untapped holes to save tapping cost.

5 Spinning into the hole with a power wrench provides the most effective installation. Installation torque limits, to avoid stripping, should be established by test in the type of material in which production Fittings are to be installed. Installation force causes a rearrangement of mating material to conform with the fitting thread contour creating a leak-tight permanent seal. Not recommended for heat treated parts. fitting threads are heat treated to Rockwell 83-89 on the 15N scale. For field servicing, Spin-Drive Fittings may be replaced by any standard fitting having the same thread size or another Spin- Drive fitting .

6 Spin-Drive Fittings Part A B C D E F G. No. No. 205010 No. 205000. "-28 Spec. Taper " Pipe-Special Taper 205010 / / / .256 / . Drive Th'd. Drive Th'd. 205000 / / / .396 / . 247235 / / / .400 / . 205210 / / / .256 / 45 / / 205200 / / / .396 / 45 / / No. 247235 No. 205210 205410 / / / .256 / 90 / / / " Pipe-Special " -28 Spec. Taper Drive Th'd. Taper Drive Th'd. 205400 / / / .396 / 90 / / No. 205200 No. 205410. " Pipe-Special " -28 Spec. Taper Taper Drive Th'd. Drive Th'd. No. 205400. " Pipe-Special Taper Drive Th'd. 7.

7 Lubrication Fittings & Accessories Drive-Type Fittings Drive-Type Fittings Drive-type Fittings are designed for fast production line installation in untapped holes to save thread tapping serrations on shank provide a hydraulic tight seal when fitting is installed properly. Cannot be used where high lubricant back pressures can be developed. Hole sizes and shank dimensions are for reference use only. To determine optimum hole size, test applications should be conducted using the type of material into which the fitting is to be installed steel, cast iron, brass, aluminum, etc.

8 Production tolerances of hole size must be taken into consideration when test is conducted. Drive-Type Fittings Part A B C D E F G. No. No. 5033 No. 5031 5033 / / / .196 / . For 16" mm For 5 16" mm Dia. Hole Dia. Hole 5031 / / / .322 / . 5036 / / / .383 / . 5385 / / / .196 / 65 / / 5318 / / / .259 / 65 / / No. 5036 No. 5385. 700504 / / / .196 / . For " For 16" Dia. Hole Dia. Hole No. 5318 No. 700504. For " For 16" Dia. Hole Dia. Hole Flush Type Fittings For use where installation of protruding fitting cannot be used. Can be used on shafts, pulleys, or other type of rotating bearing or parts.

9 No. 700502. For " Dia. Hole Part A B C D. No. in. / mm 700502 / / / Dia..256 / 8. Lubrication Fittings & Accessories Stainless Steel Fittings Stainless Steel Fittings Select Lincoln stainless steel Fittings for marine applications, food processing machinery, sewage disposal systems or any use where protection against corrosive elements is a design criteria. Stainless steel ball checks and springs are securely housed in passivated austenitic type 303 stainless steel bodies for maximum usable life and performance. To avoid use of inferior substitutes specify Lincoln Stainless Steel Fittings by part number on your drawings.

10 Stainless Steel Fittings Part A B C D E F G. No. No. 5010-9 No. 5000-9. 5010-9 / / / Hex..260/ . " -28 Taper Thd. " Spec. Extra (SAE-LT) Short 5000-9 / / / Hex..400 / . 5410-9 / / / Hex..260 / 90 / / 5033-9 / / / Dia..196 / . Max. 600 F (315 C). No. 5410-9 No. 5033-9. " -28 Taper Thd. For 16" mm (SAE-LT) Dia. Hole 9. Lubrication Fittings & Accessories Special Purpose Fittings Leakproof fitting 7/16". Hex mm 1" Leakproof Fittings are special purpose Fittings for use in those applications where a mm 33/64" positive seal is essential.