ThreeBond 3164 UV Cruing Silicone Resin - …

1 ThreeBond Europe BP 39105 95073 Cergy-Pontoise Cedex Tel: +33 (0)1 34 32 39 60 Fax: +33 (0)1 34 32 39 61 TB 3164 All recommendations and statements are based on our research and we believe them to be reliable. We cannot guarantee the results obtained through the use of our products. All products are sold and samples are given without warranty, expressed or implied, of fitness for any particular purpose or otherwise. The user shall make his own tests to determine the suitability of the product for his purpose. No agency or representative or employee of this company is authorised to change this provision.

2 TECHNICAL DATA ThreeBond 3164 UV Cruing Silicone Resin Three Bond 3164 is a ultraviolet curing Silicone Resin . They are single component, easy to handle and will cure under ultraviolet rays in a short time. Portion that is obscured from ultraviolet light will be cured by moisture. The cured materials have good heat and cold resistances, and flexible, just like conventional RTV Silicone . However, with ultraviolet curing, the process is shorten drastically as compared to conventional RTV silicones. Upon curing, gives a good elastic rubber-like cured material.

3 It is suitable for bonding, fixing, sealing and potting of electrical and electronic parts. The amount of low molecular weight siloxane is low. Hence, it will not affect electrical contact points. Features Excellent ultraviolet curability Single component, does not contain any solvent Portion obscured from ultraviolet light can be cured by moisture (de-alcohol type) Good heat and cold resistance. Amount of low molecular weight siloxane is lower than conventional products Excellent bonding ability Applications Bonding, fixing, sealing and potting of electrical and electronic parts Characteristics Before Hardening Item Units 3164 Test Method Remarks Appearance - White liquid 3TS-201-02 Visual Viscosity Pa s {P} 50{500} 3TS-210-02 25 C Specific Gravity - 3TS-213-02 ThreeBond Europe BP 39105 95073 Cergy-Pontoise Cedex Tel: +33 (0)1 34 32 39 60 Fax.

4 +33 (0)1 34 32 39 61 TB 3164 All recommendations and statements are based on our research and we believe them to be reliable. We cannot guarantee the results obtained through the use of our products. All products are sold and samples are given without warranty, expressed or implied, of fitness for any particular purpose or otherwise. The user shall make his own tests to determine the suitability of the product for his purpose. No agency or representative or employee of this company is authorised to change this provision. After Hardening UV + moisture cure UV cure condition : High pressure mercury lamp (HMW-244-11CM), 4kW, 80 W/cm Irradiation distance 15cm, irradiance 150 mW/cm2, dose 30kJ/m2 Moisture cure condition.

5 25 C, 55% RH x 7 days Item Units 3164 Test Method Remarks Hardness 30 3TS-215-01 Shore A Tensile Strength MPa 3TS-320-01 Elongation % 132 3TS-320-01 Low MW siloxane ppm 150 GCMS D3~D10 Electrical Properties (UV + moisture cure) Item Units 3164 Test Method Remarks Volumetric resistivity m x 1013 3TS-401-01 Surface resistivity x 1015 3TS-402-01 Dielectric constant 3TS-405-01 1 MHz Dielectric dissipation factor 3TS-405-01 1 MHz Dielectric breakdown voltage kV/mm 3TS-406-01 UV Curing Item Units 3164 Test Method Remarks Hardness 28 3TS-215-01 Shore A Elongation % 177 3TS-320-01 Tensile Strength MPa 3TS-320-01 Thickness Hardenability Item Units 3164 Test Method Remarks Surface Curability kJ/m2 30 3TS-222-01 Thickness 1~5mm Thickness Curability mm 5 3TS-222-01 30kJ/m2 9 60kJ/m2 UV cure condition.

6 High pressure mercury lamp (HMW-244-11CM), 4kW, 80 W/cm Irradiation distance 15cm, irradiance 150 mW/cm2, dose 30kJ/m2 ThreeBond Europe BP 39105 95073 Cergy-Pontoise Cedex Tel: +33 (0)1 34 32 39 60 Fax: +33 (0)1 34 32 39 61 TB 3164 All recommendations and statements are based on our research and we believe them to be reliable. We cannot guarantee the results obtained through the use of our products. All products are sold and samples are given without warranty, expressed or implied, of fitness for any particular purpose or otherwise. The user shall make his own tests to determine the suitability of the product for his purpose.

7 No agency or representative or employee of this company is authorised to change this provision. Moisture Curing Moisture cure condition: 25 C, 55% RH x 7 days Item Units 3164 Test Method Remarks Tack-free time h 24 3TS-219-04 25 C, 55% RH Reliability Tests (Values measured and recorded as rate of change, units: %) Heat Resistance (150 C x 7 days) Item Initial 3164 Test Method Remarks Hardness 100 108 3TS-215-01 Shore A Elongation 100 153 3TS-320-01 Tensile Strength 100 184 3TS-320-01 Heat Cycle Resistance Item Initial 3164* Test Method Remarks Hardness 100 140 3TS-215-01 Shore A Elongation 100 131 3TS-320-01 Tensile Strength 100 119 3TS-320-01 *.

8 -40 C x 30 minutes 150 C x 30 minutes, 500 cycles Handling Precautions 1. The curing speed varies depending on the type and distance of light source. It is important to confirm the optimum condition before use. 2. The parts obscured from the ultraviolet light will cure by moisture. Hence, it is important to confirm the application. 3. Ultraviolet light is harmful. If using a large amount of this product or using for a long time, it is compulsory to ventilate the area well. If needed, use mask, non-permeable gloves, and protective glasses. Ventilate with local exhaust equipment.

9 4. Harmful. Do not inhale or ingest. In the event that this product is ingested, consult a physician immediately. 5. The product can cause inflammation on sensitive skin. In case of contact with skin, wipe with a dry cloth and wash affected area with soap and warm water. 6. In case of eye contact, do not blink or rub eyes. Wash under running water for about 15 minutes. Consult a physician immediately. 7. In case of abnormal reaction, stop using the product and consult a physician. Persons with allergies or who are sensitive should not use this product. 8. Depending on the material of the mating surfaces, the surface may deteriorate.

10 Hence, confirm the effect of the product before use. ThreeBond Europe BP 39105 95073 Cergy-Pontoise Cedex Tel: +33 (0)1 34 32 39 60 Fax: +33 (0)1 34 32 39 61 TB 3164 All recommendations and statements are based on our research and we believe them to be reliable. We cannot guarantee the results obtained through the use of our products. All products are sold and samples are given without warranty, expressed or implied, of fitness for any particular purpose or otherwise. The user shall make his own tests to determine the suitability of the product for his purpose. No agency or representative or employee of this company is authorised to change this provision.