TRAC-Vault • Surface Mount Installation Instructions

1 IntroductionThis is the Supra TRAC-Vault Surface Mount Installation Instructions . TRAC-Vault is a UL-listed, intelligent storage device that holds multiple keys or access cards and records a comprehensive audit trail of who accessed it and following hardware is required for this Installation : Four HECO MMS-SS 10 x 100 screwsYou can order an Installation kit from Supra Security that contains all the necessary hardware for installing the TRAC-Vault . An interior cover plate is also installationInstall the TRAC-Vault in a location convenient for your keyholders. To meet ADA requirements, the unit must be installed 48 inches from the ground to the center of the install the TRAC-Vault , you will need the following equipment: Drill Drill bits Wrenches Pliers or vice grips Level or punch Pen or pencil Dremel tool or hacksawTo install the TRAC-Vault , do the following:1.

2 Hold the vault in the desired postion on the wall, being careful to locate the four mounting holes away from mortar lines and away from the edge of the wall as well as Using a marker, trace the location of all 4 mounting Using a drill with an 8 mm masonry drill bit, drill each hole to a depth of 105 mm. After drilling each hole, ensure that each hole aligns with the 4 holes in the back of the vault . P/N 43317-05 July 2011 2011 UTC Fire & Security. All rights Surface MountInstallation Instructions4. Clean out the debris from all 4 Insert each mounting screw all the way through the mounting hole in the vault , ensuring that all 4 screw heads are fluch with the back of the vault , and behind the vault Using the appropriate driver, drive all 4 screws into the wall a little at a time until all 4 screws are driven completely in and the vault is tight against the 1.

3 TRAC-Vault , side viewTRAC-VaultNutVault Drain holeTRAC-Lidchain bracketLid chainattachmentWallScrew headTRAC-Lid installationTo install the TRAC-Lid in the TRAC-Vault , attach the provided chain to the TRAC-Lid. Insert the loose end of the chain through the eyehole on the back of the TRAC-Lid, then crimp the end of the chain to the bracket inside the place the TRAC-Lid in the TRAC-Vault , the lock blades on the side of the TRAC-Lid must be retract the blades on the TRAC-Lid, do the following:1. Insert a TRACkey into the Press the green START Enter the four-digit PIN code, then press the KEY When the indicator light on the TRAC-Lid flashes green, turn the thumb lever 180 counterclockwise to a horizontal position with the flat side 2. Installed TRAC-LidThumb leverTRAC-LidTRAC-VaultTRACkeyIndicatorl ightInsert the TRAC-Lid into the TRAC-Vault , then turn the thumb lever clockwise 180 to lock the blades into place (Figure 2).

4 Important! When installing a TRAC-Lid in a TRAC-Vault you MUST record which serial number is installed at each location. This important information is necessary for the integrity of the TRAC cess database. Use a Device Assignment sheet to record serial numbers and locations of warrantyTRAC- vault is a product of the Security business of Supra manufacturer warrants this product to be free from defects in material and workmanship under conditions of normal use for a term of 1 year from the date of the warranty period, if a Supra Security product or any of its components becomes defective, it will be repaired or replaced without units will be repaired at the discretion of the manufacturer, if not, a card will be forwarded to the customer suggesting a replacement unit and the cost of that warranty does not apply to units which have been subject to abuse, misuse, negligence or accident, or to which any modifications.

5 Alterations or repairs have been made or warranty is extended only to the original purchaser of the product and may be enforced only by such person. During the warranty period, if the product or any warranted components thereof becomes defective, at the manufacturer s discretion, it will be replaced or repaired without charge if returned in accordance with the following Instructions :Obtain a return authorization number by calling 1-800-545-7402, then carefully pack the unit it in a well padded and insulated carton and return, postal charges prepaid to:Customer Service RMA#Supra Security4001 Fairview Industrial Dr. SESalem, OR 97302 USAI nclude a note explaining the nature of the malfunction. Properly pack products returned under this warranty; Supra will not be responsible for warranty repairs to equipment damaged because of improper above warranty is in lieu of all other express warranties, and implied warranties of merchantability and fitness for a particular purpose are limited in duration for a period of 1 year from the date of no circumstances shall manufacturer be liable to the purchaser or any other person for incidental or consequential damages of any nature, including without limitation damages for personal injury or damages to property, and however occasioned, whether alleged as resulting from breach of warranty by manufacturer, the negligence of manufacturer or otherwise.

6 Manufacturer s liability will in no event exceed the purchase price of the product. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to a longer period is required by applicable law, any action against manufacturer in connection with this smoke alarm must be commenced within one year after the cause of action has agent, employee, or representative of the Manufacturer nor any other person is authorized to modify this warranty in any respect. Repair or replacement as stated above is the exclusive remedy of the purchase hereunder. This warranty gives you specific legal rights, and you also have other rights which vary from state to supportToll-free: 800-842-8218 Outside the toll-free area: Contact your local