Example: bachelor of science

Trane Product Data Split System Heat Pump XR17 - 4TWR7

XR174 TWR72, 3, 4 & 5 TonsSplit SystemHeat PumpProduct DataPUB. NO. 22-1886-01 2011 Trane 2 22-1886-01 Features and Benefits CLIMATUFF 2-stage scroll compressor Efficiency up to SEER and HSPF All Aluminum SPINE FIN coil DURATUFF weather proof and rust proof base COMFORT R mode approved for better comfort indoors QUICK-SESS cabinet, service access and refrigerant connections with full coil protection WEATHERGUARD fasteners Glossy corrosion resistant finish tarpaulin gray cabinet with anthracite gray top Internal compressor high/low pressure & temperature protection Liquid line filter/drier Low sound with advanced PSC fan motor Service valve cover R-410A refrigerant From 70 to 100% capacity modulation 100% run test in the factory Low ambient cooling to 55 as shipped Extended warranties available22-1886-01 3 ContentsFeatures and Benefits 2 General Data 4 Product Specifications 4A-weighted Sound Power Level [dB(A)]

• CLIMATUFF™ 2-stage scroll compressor • Efficiency up to 18.0 SEER and 9.5 HSPF • All Aluminum SPINE FIN™ coil • DURATUFF™ weather proof and rust proof base • COMFORT ”R”™ mode approved for better comfort indoors • QUICK-SESS™ cabinet, service access and refrigerant connections with full coil protection

Tags:

  Compressor, Trane, Scroll, Scroll compressor

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Trane Product Data Split System Heat Pump XR17 - 4TWR7

1 XR174 TWR72, 3, 4 & 5 TonsSplit SystemHeat PumpProduct DataPUB. NO. 22-1886-01 2011 Trane 2 22-1886-01 Features and Benefits CLIMATUFF 2-stage scroll compressor Efficiency up to SEER and HSPF All Aluminum SPINE FIN coil DURATUFF weather proof and rust proof base COMFORT R mode approved for better comfort indoors QUICK-SESS cabinet, service access and refrigerant connections with full coil protection WEATHERGUARD fasteners Glossy corrosion resistant finish tarpaulin gray cabinet with anthracite gray top Internal compressor high/low pressure & temperature protection Liquid line filter/drier Low sound with advanced PSC fan motor Service valve cover R-410A refrigerant From 70 to 100% capacity modulation 100% run test in the factory Low ambient cooling to 55 as shipped Extended warranties available22-1886-01 3 ContentsFeatures and Benefits 2 General Data 4 Product Specifications 4A-weighted Sound Power Level [dB(A)]

2 ] 4 Accessory Description and Usage 5 AHRI Standard Capacity Rating Conditions 5 Model Nomenclature 6 Electrical Data 7 Dimensions 10 Mechanical Specifications 11 4 22-1886-01 Product SpecificationsModel No. 1 4 TWR7024A1000A 4 TWR7036A1000A 4 TWR7048A1000A 4 TWR7060A1000 AElectrical Data V/Ph/Hz 2 208/230/1/60 208/230/1/60 208/230/1/60 208/230/1/60 Min Cir Ampacity 15 22 28 37 Max Fuse Size (Amps) 25 35 45 60 compressor CLIMATUFF - scroll CLIMATUFF - scroll CLIMATUFF - scroll CLIMATUFF - SCROLLNo. Compress. No. Stages 1 -2 1-2 1-2 1-2 RL AMPS - LR AMPS - - 82 - 104 - Fan FL Amps HP 1/8 1/8 1/5 1/4 Fan Dia (inches) Spine Fin Spine Fin Spine Fin Spine Fin Refrigerant R-410A 10/3-LB/OZ 10/8-LB/OZ 12/9-LB/OZ 13/3-LB/OZLine Size - (in.)

3 Gas 3 5/8 3/4 7/8 1-1/8 Line Size - (in.) Liquid 3 3/8 3/8 3/8 3/8 Dimensions H x W x D (Crated) x x x x x x x x - Shipping 272 274 329 330 Weight - Net 236 236 292 293 Start Components NO NO NO NOSound Enclosure NO NO NO NOCompressor Sump Heat YES YES YES YESO ptional Accessories: 4 Rubber Isolator Kit BAYISLT101 BAYISLT101 BAYISLT101 BAYISLT101 Snow Leg - Base & Cap 4" High BAYLEGS002 BAYLEGS002 BAYLEGS002 BAYLEGS002 Snow Leg - 4" Extension BAYLEGS003 BAYLEGS003 BAYLEGS003 BAYLEGS003 Hard Start Kit scroll BAYKSKT260 BAYKSKT260 BAYKSKT263 BAYKSKT263 Extreme Condition Mounting Kit BAYECMT004 BAYECMT004 BAYECMT004 BAYECMT004 Vertical Discharge Air Kit Base 4 BAYVDTA003 BAYVDTA004 BAYVDTA004 BAYVDTA004 Auto Charge Solenoid Kit BAYCAKT001 BAYCAKT001 BAYCAKT001 BAYCAKT001 Refrigerant Lineset 5 TAYREFLN9* TAYREFLN7* TAYREFLN3* TAYREFLN4*1 Certified in accordance with the Air-Source Unitary Heat Pump Equipment certification program which is based on AHRI Standard 210 Calculated in accordance with Only use HACR circuit breakers or Standard line lengths - 60'.

4 Standard lift - 25' Suction and Liquid line. For Greater lengths and lifts refer to refrigerant piping software Pub# 32-3312-0 . ( denotes latest revision) 4 For accessory description and usage, see page 5. 5 * = 15, 20, 25, 30, 40 and 50 foot lineset DataSound Power LevelModelA-Weighted Sound Power Level [dB(A)]Full Octave Sound Power [dB]63 Hz125 Hz250 Hz500 Hz1000 Hz2000 Hz4000 Hz8000 Hz4 TWR7024A17267676263625755504 TWR7036A17266666464635754484 TWR7048A17268736567635653474 TWR7060A1745875666866595552 Note: Rated in accordance with AHRI Standard 270-200822-1886-01 5 General DataAHRI Standard Capacity Rating ConditionsAHRI STANDARD 210/240 RATING CONDITIONS (A) Cooling 80 F DB, 67 F WB air entering indoor coil, 95 F DB air entering outdoor coil.(B) High Temperature Heating 47 F DB, 43 F WB air entering outdoor coil, 70 F DB air entering indoor coil.(C) Low Temperature Heating 17 F DB, 15 F WB air entering outdoor coil, 70 F DB air entering indoor coil.

5 (D) Rated indoor airflow for heating is the same as for cooling. AHRI STANDARD 270 RATING CONDITIONS (Noise rating numbers are determined with the unit in cooling opera-tion.) Standard Noise Rating number is at 95 F outdoor Description and UsageRubber Isolators 5 rubber donuts to isolate condens-ing unit from mounting frame or pad. Use on any application where sound transmission needs to be Conditions Mounting Kit Bracket kits to secure-ly mount condensing unit to a frame or pad without removing any panels. Use in areas with high winds, or on commercial rooftops, Ambient Cooling For low ambient cooling below 55 see Application Guide APP-APG013-EN. 6 22-1886-01 Model NomenclatureRefrigerant Type4 = R-410 ATRANEP roduct TypeW = Split Heat PumpT = Split CoolingProduct FamilyZ = Leadership Two StageX = LeadershipR = Replacement/RetailM or B = BasicA = Light CommercialFamily SEER3 = 13 6 = 16 0 = 204 = 14 8 = 18 5 = 15 9 = 19 Split System Connections 1-6 Tons0 = BrazedNominal Capacity in 000s of BTUsMajor Design ModificationsPower Supply1 = 200-230/1/60 or 208-230/1/603 = 200-230/3/604 = 460/3/60 Secondary FunctionMinor Design ModificationsUnit Parts IdentifierOutdoor Units4 TWR7036A1000 AAT U D 1 B 0 8 0 A 9 H 3 1 A AFurnace ConfigurationTU = Upflow/HorizontalTD = Downflow/HorizontalTypeE = 80% Induced Draft StandardD = 80% Induced Draft PremiumC = 90% Condensing StandardX = 90% Condensing

6 PremiumH = 95% Condensing PremiumNumber of Heating Stages1 = Single Stage2 = Two StageM = ModulatingMajor Design ChangeMinor Design ChangeService Digit - Not OrderableHeating Input in 1000 s (BTUH)080 = 80,000 BTUHC abinet WidthA = " Cabinet WidthB = " Cabinet WidthC = " Cabinet WidthD = " Cabinet WidthAir Capacity for CoolingStandard PSC Variable Speed High Efficiency24 = 2 To ns V3 = 3 To ns H3 = 3 To ns36 = 3 To ns V4 = 4 To ns H4 = 4 To ns42 = To ns V5 = 5 To ns H5 = 5 To ns45 = 4 To ns48 = 4 To ns54 = 5 To ns60 = 5 To ns72 = 6 To nsVoltage9 = 115 Volts / 60 Hertz / Natural GasA = 115 Volts / 50 Hertz / Natural GasC = 115 Volts / Natural Gas with Communicating System ControlF = 115 Volts / Natural Gas with Integrated Electronic FilterD = 115 Volts / Natural Gas with Communicating System Control and Integrated Electronic FilterDraft Inducer Speeds1 = Single Speed2 = Two SpeedV = Variable SpeedGas FurnacesG A M 5 A 0 B 3 6 M 3 1 S A ABrandT = BetterG = Good Product TypeA = Air HandlerProduct Tier2 = Good, Entry Level Feature Set4 = Better, Retail Replacement Mid = Better, Entry Level High Effy.

7 , Multi-Speed7 = Best, Retail Replacement High Effy., Variable-Speed8 = Best, Retail Ultimate High Effy., Variable-SpeedMajor Design ChangeMinor Design ChangeUnit Parts IdentifierAirflow Type & CapabilityS = Low Effy PSC, 1-5 - nom. Tonnage (cfm/ton)M = Mid Effy Multi-Speed, 1-5 - nom. To nnage (cfm/ton)H = High Effy Multi-Speed, 1-5 - nom. To nnage (cfm/ton)V = High Effy Variable, 1-5 - nom. To nnage (cfm/ton)No Descriptor0 = Air Handler / CoilSystem Control TypeS = Standard - 24 VACC = CLII VDCSize (Footprint)A = x = x = x Size: Air Handler or Coil0-9 = AH Coil - 1000 BTU s (18, 24, 30, 36, 42, 48, 60)Power Supply1 = 208-230/1/60 ConvertabilityM = Multi-poise 4-wayF = Upflow Front Return, 3-wayT = 3-wayAir Handler4 T X C B 0 3 6 A C 3 H C A ASeriesT = Premium (Heat Pump or Convertible Coil)C = Standard (Cooling Only)Refrigerant Type4 = R-410 ACoil DesignX = Direct Expansion Evaporator CoilCoil FeatureC = Cased A CoilA = Uncased A CoilF = Cased Horizontal Flat CoilCoil Width (Cased/Uncased)A = " "B = " / "C = " / "D = " / "H = "Refrigerant Line Coupling0 = BrazedNominal Capacity in 1000's (BTUH)Major Design ChangeEfficiencyC = StandardS = Hi Efficiency (derived from 10 SEER products)

8 Refrigerant Control3 = TXV - Non-BleedCoil CircuitryH = Heat PumpC = CoolingAirflow ConfigurationA = Upflow OnlyU = Upflow / DownflowH = Horizontal OnlyC = Convertible - Upflow, Downflow, Left or Right AirflowMinor Design ChangeService Digit - Not OrderableHeat Pump/Cooling Coils22-1886-01 74 TWR7024 AElectrical DataSchematic Diagrams(SEE LEGEND)Printed from D157616P01 8 22-1886-014 TWR7036 AElectrical DataSchematic Diagrams(SEE LEGEND)Printed from D157628P0122-1886-01 94 TWR7048A, 060 AElectrical DataSchematic Diagrams(SEE LEGEND)Printed from D157617P01 10 22-1886-01 Electrical DataLEGENDS chematic Diagrams22-1886-01 11 Dimensions4 TWR7 Outline DrawingNote: All dimensions are in MM (Inches).

9 From Dwg. D152635 MODELSBASEABCDEFGHJK 4 TWR7024A 41045 (41 1/8)946 (37-1/4)870 (34-1/4)5/83/8152 (6)98 (3-7/8)219 (8-5/8) 86 (3-3/8)711 (28) 4 TWR7036A41147 (45 1/8)946 (37-1/4)870 (34-1/4)3/43/8152 (6)98 (3-7/8)219 (8-5/8) 86 (3-3/8)813 (32) 4 TWR7048A41147 (45 1/8)946 (37-1/4)870 (34-1/4)7/83/8152 (6)98 (3-7/8)219 (8-5/8) 86 (3-3/8)813 (32) 4 TWR7060A41147 (45 1/8)946 (37-1/4)870 (34-1/4)1-1/83/8152 (6)98 (3-7/8)219 (8-5/8) 86 (3-3/8)813 (32) 05/13 Trane has a policy of continuous Product and Product data improvement and it reserves the right to change design and specifications without SpecificationsGeneralThe 4 TWR7 is fully charged from the factory for matched indoor section and up to 15 feet of piping. This unit is designed to operate at outdoor ambient temperatures as high as 115 F. Cooling capacities are matched with a wide se-lection of air handlers and furnace coils that are AHRI certified. The unit shall be certified to UL 1995. Exterior is designed for outdoor casing is constructed of heavy gauge, G60 galvanized steel and painted with a weather-resistant powder paint on all louvers and panels.

10 Cor-rosion and weatherproof CMBP-G30 DuraTuff ControlsRefrigeration System controls include condenser fan, compressor contactor and high pressure switch. High and low pressure controls are inherent to the compressor . A factory installed liquid line drier is Climatuff 2-stage compressor features internal over temperature and pressure protection and hermetic motor. Other features include: centrifugal oil pump and modular plugs for electrical connections. Condenser CoilThe outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered Ambient CoolingAs manufactured, this unit has a cooling capability to 55 F. For low ambient cool-ing below 55 see Application Guide.


Related search queries