Triple-Cutter Turning Head - Saw Blades & Tangential ...

1 Triple-Cutter Turning HeadMore preciseFasterCheaperMore robustThe DSD 16 is equipped with three preci- sion-ground WAGNER carbide reversing plates orwith standard cutting inserts (forms SMCT or CCMT).Compared to common tools holding only one insert, the DSD 16 holds great removing capacity: The three car-bide inserts cause a chip division into three equal parts. Precision: The chip thickness at one edge measures only of the total feed rate. This brings up the possibility of considerably higher work piece is balanced due to the three cutting edges. Turning precision of - mm in diameter is thus possible even for great chipping of the unmistakably fixed position, the Turning plates can be build into the holder quickly and be pre-adjusted in 2 mm steps, as the three holders of the Turning plates and the three slide valves at the DSD 16 come with a precise cogging with a 1 mm done centrally for all three holders of Turning plates.

2 Diameter corrections can thus be easily done in the Turning diameter The fine adjustment of the diameter Materials and shapes:all machinable material, even wood and syntheticsthe material can be round, square or hexagonal, rolled or pulled. 8-700e WAGNER -W erkzeugsystemeM ller GmbHGutenbergstra e 4/1D-72124 PliezhausenPhone +49 (0)71 27 / 97 33 00 Fax 71 27 / 97 33 (0)Range of Tools:Thread Rolling AttachmentsThread Rolling HeadsThread Cutting HeadsMulti- cutter Turning HeadsDriven ToolsFast and precise reduction of diameters: Central fine adjustment of the diameter Turning range 2 - 16 mm Great diameter reductions in one work unit High Turning precision and perfect surfaces For small and great numbers of Turning parts Stationary and rotating design 3 Triple-Cutter Turning HeadThe DSD 16 in is suitable for the use on one- or multi -spindle lathes as well as on CNC lathes.

3 The rotating type is designed for the use on right Turning rotary transfer machines, indexing table machines, cy-cle-, transfer- and special design auto-matic lathes,For the insertion into the machine we offer a number of shanks and - Triple-Cutter Turning Head with plates SCMT, CCMT and -carbide insertsFor the reduction of 50-70*max. 70* depending on the shankmax. 35 26 70120 Dimensions120 WAGNER -W erkzeugsystemeM ller GmbHGutenbergstra e 4/1D-72124 PliezhausenPhone +49 (0)71 27 / 97 33 00 Fax 71 27 / 97 33 (0)The - Triple-Cutter Turning Head with VDI-shank.