UFC 4-020-01 DoD Security Engineering Facilities Planning ...

1 UFC 4-020-01 11 September 2008 UNIFIED Facilities CRITERIA (UFC) DoD Security Engineering Facilities Planning manual DISTRIBUTION STATEMENT A: Approved for Public Release; Distribution is unlimited. UFC 4-020-01 11 September 2008 UNIFIED Facilities CRITERIA (UFC) DoD Security Engineering Facilities Planning manual Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder.

2 DEPUTY UNDER SECRETARY OF DEFENSE (INSTALLATIONS AND ENVIRONMENT) J3, DEPUTY DIRECTORATE FOR ANTITERRORISM AND FORCE PROTECTION, JOINT CHIEFS OF STAFF ARMY CORPS OF ENGINEERS (Preparing Activity) NAVAL Facilities Engineering COMMAND AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by \1\ .. /1/) Change No. Date Location UFC 4-020-01 11 September 2008 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides Planning , design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD(AT&L) Memorandum dated 29 May 2002.

3 UFC will be used for all DoD projects and work for other customers where appropriate. All construction outside of the United States is also governed by Status of forces Agreements (SOFA), Host Nation Funded Construction Agreements (HNFA), and in some instances, Bilateral Infrastructure Agreements (BIA.) Therefore, the acquisition team must ensure compliance with the more stringent of the UFC, the SOFA, the HNFA, and the BIA, as applicable. UFC are living documents and will be periodically reviewed, updated, and made available to users as part of the Services responsibility for providing technical criteria for military construction.

4 Headquarters, Army Corps of Engineers (HQUSACE), Naval Facilities Engineering Command (NAVFAC), and Air Force Civil Engineer Support Agency (AFCESA) are responsible for administration of the UFC system. Defense agencies should contact the preparing service for document interpretation and improvements. Technical content of UFC is the responsibility of the cognizant DoD working group. Recommended changes with supporting rationale should be sent to the respective service proponent office by the following electronic form: Criteria Change Request (CCR).

5 The form is also accessible from the Internet sites listed below. UFC are effective upon issuance and are distributed only in electronic media from the following source: Whole Building Design Guide web site Hard copies of UFC printed from electronic media should be checked against the current electronic version prior to use to ensure that they are current. AUTHORIZED BY: _____ JAMES C. DALTON, Chief, Engineering and Construction Army Corps of Engineers _____JOSEPH E. GOTT, Chief Engineer Naval Facilities Engineering Command _____ PAUL A.

6 PARKER The Deputy Civil Engineer DCS/Installations & Logistics Department of the Air Force _____Dr. GET W. MOY, Director, Installations Requirements and Management Office of the Deputy Under Secretary of Defense (Installations and Environment) UFC 4-020-01 11 September 2008 This page intentionally left blank UFC 4-020-01 11 September 2008 Unified Facilities Criteria (UFC) New Document Summary Sheet Subject: UFC 4-020-01 , DoD Security Engineering Facilities Planning manual Cancels: UFC 4-020-01 FA, Security Engineering Project Development Document Description and Need.

7 Purpose: This UFC supports the Planning of DoD Facilities that include requirements for Security and antiterrorism. It will be used in conjunction with UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings, to establish the Security and antiterrorism design criteria that will be the basis for DoD facility designs. Those criteria include the assets to be protected, the threats to those assets, the levels to which those assets are to be protected against those threats, and any design constraints imposed by facility users.

8 This document also provides a means for identifying the costs for providing the applicable levels of protection and a risk management process for evaluating those costs and the protection options. Application and Use: Commanders, Security and antiterrorism personnel, planners, and other members of project Planning teams will use this UFC to establish project specific design criteria for DoD Facilities , estimate the costs for implementing those criteria, and evaluating both the design criteria and the options for implementing it.

9 The design criteria and costs will be incorporated into project programming documents. This UFC also provides guidance for incorporation of Security and antiterrorism principles into installation master Planning . Need: This UFC is one in a series of Security Engineering Unified Facilities Criteria that address minimum standards, Planning , preliminary design, and detailed design for Security and antiterrorism. This UFC provides the starting point for application of all of the manuals within the Security Engineering series.

10 Without this UFC, there would be no standardized DoD-wide process for identifying and justifying design criteria for Security and antiterrorism and no basis for applying the other manuals in the series. Impact. The following direct benefits will result from publication of UFC 4-020-01 : Creates a standardized approach for identifying and justifying Security and antiterrorism design criteria for DoD Facilities Creates standardized nomenclature and criteria for asset, threat, and level of protection definition.