UL-Classified Head of Wall Assembly Fire Ratings

UL-Classified Head of Wall Assemblies Vertical Deflection Clips: VertiClip® SLD VertiClip SLD150, SLD250, SLD362, SLD400, SLD600 and SLD800, including step bushings, for use with light gauge steel framing utilizing standard ceiling runners or generic deflection channels, in dynamic head-of-wall joint

Tags:

  Walls, Assemblies, Wall assemblies

Information

Related documents

USG Area Separation Wall Systems Brochure (English) - …

www.usg.com

An area separation wall can be used in townhouses up to four stories (44 ) tall and with all common floor-ceiling heightsa. It must either be ... gypsum panel partition assemblies used to provide fire-resistive protection for common walls in townhouse construction. These systems install quickly and easily. Because they weigh at least

  System, Walls, English, Brochure, Assemblies, Wall systems brochure

TECHNICAL BULLETIN - Wall and Ceiling Bureau

www.wallandceilingbureau.org

Both Assemblies: Control joints can be utilized to create a separation between adjacent surfaces on one side of the wall and may not be required at the same location on the other side of the wall (Figure 1), if the requirements in section 20.2 (GA-4.7.1.1) to section 20.4 (GA-4.7.4) exist. At a location where an expansion joint is

  Walls, Assemblies

Installation Manual-ZIP System Sheathing-Wall and Roof

www.huberwood.com

ZIP System® sheathing and tape is compatible with butyl, polyurethane and 100% silicone sealants. When using 100% silicone sealants over ZIP System™ tape use a primer such as 3M Hi-Strength 90 or rub the tape with an acetone cleaner.

  Walls

Related search queries