Ultra low pressure BWRO T M G ( C ) - Toray …

1 Ultra low pressure BWROT M G ( C )TMG20-370C8 370(34) ,500( )34 TMG20-400C8 400(37) ,200( )31 TMG20N-400C8 400(37) ,200( )34 TMG20-440C8 440(41) ,300( )281. Membrane TypeCross Linked Fully Aromatic Polyamide Composite2. Test ConditionsFeed Water PressureFeed Water TemperatureFeed Water ConcentrationRecovery RateFeed Water pH110 psi( )77 F(25 C)500 mg/l Nacl15%73. Minimum Salt Minimum Product Flow Rate7,500gpd( )(TMG20-370C)8,200gpd( )(TMG20-400C)8,200gpd( )(TMG20N-400C)9,000gpd( )(TMG20-440C)DimensionsAll dimensions shown in Inches (millimeter).Feed WaterConcentrated BrineFB40(1,016)Flow (29) (201)TMG20-400 CTMG20-440 CType DiameterInchMembrane Areaft2(m2)Salt Rejection%Product Flow Rategpd(m3/ d)Feed Spacer ThicknessmilTMG20-370 CTMG20N-400 COperating the recommended design range, please consult the latest Toray technical bulletin, design guide lines,computer design program, and/ or call an application specialist.

2 If the operating limits given in this ProductInformation Bulletin are not strictly followed, the Limited Warranty will be null and elements are wet tested, treated with a 1% by weight percent sodium bisulfite storage solution, andthen vacuum packed in oxygen barrier bags, or treated with tested feed water solution, and then vacuumpacked in oxygen barrier bags with deoxidant inside. To prevent biological growth during short termstorage, shipment, or system shutdown, it is recommended that Toray elements be immersed in aprotective solution containing 500 - 1,000 ppm of sodium bisulfite (food grade) dissolved in presence of free chlorine and other oxidizing agents under certain conditions, such as heavy metalswhich acts as oxidation catalyst in the feed water will cause unexpected oxidation of the membrane.

3 It isstrongly recommended to remove these oxidizing agents contained in feed water before operating ROsystem. from the first hour of operation shall be customer is fully responsible for the effects of chemicals that are incompatible with the use will void the element Limited accepts no responsibility for results obtained by the application of this information or the safety or suitability of Toray 's products, either alone or in combination with other products. Users are advised to make their own tests to determine the safety and suitability of each product combination for their own data may change without prior notice, due to technical modifications or production 2014 Maximum Operating PressureMaximum Feed Water Temperature Maximum Feed Water SDI15 Feed Water Chlorine ConcentrationFeed Water pH Range, Continuous OperationFeed Water pH Range, Chemical CleaningMaximum pressure Drop per ElementMaximum pressure Drop per Vessel365psi ( MPa)113 F (45 C)5 Not Detactable2-111-1215 psi ( MPa)50 psi ( MPa)Operating InformationNoticeAmericas.

4 Toray Membrane USA, Office13435 Danielson St,Poway, CA 92064, USATel: +1 858 218 2390 Fax: +1 858 486 3063 Europe, Middle East and Africa: Toray Membrane Europe AGGrabenackerstrasse 8CH-4142 M nchenstein 1, SwitzerlandTel: +41 61 415 87 10 Fax: +41 61 415 87 20 CHINA: Toray BlueStar Membrane Co., Anxiang Street, Area B,Beijing Tianzhu Airport Economic Development Zone,Beijing ,101318 : +86 10 80490552 Fax: +86 10 80485217 Asia and Oceania: Toray Industries, Membrane Products Department1-1, Nihonbashi muromachi 2-chomeChuo-ku, Tokyo 103-8666, JapanTel : +81 3 3245 4540 Fax: +81 3 3245 4913http:/ /