Ultra Precision Thin Film Chip Resistors - Vishay

1 TNPU Draloric Revision: 01-Jul-161 Document Number: 28779 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Precision thin film chip Resistors TNPU e3 Ultra Precision thin film flat chip Resistors combine the proven reliability of TNPW e3 products with a most advanced level of Precision and stability. This unique combination makes the product perfectly suited for all applications with outstanding requirements towards size, reliable Precision and Low temperature coefficient and tight tolerances Sulfur resistance verified according to ASTM B 809 Superior moisture resistivity (85 C.)

2 85 % RH) Excellent overall stability at different environmental conditions % (1000 h rated power at 70 C) AEC-Q200 qualified Material categorization: for definitions of compliance please see Industrial equipment Telecommunication Medical equipment Instrumentation Test and measuring equipment AutomotiveNote(1)Please refer to APPLICATION INFORMATION, see INFORMATIONWhen the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board.

3 The rated dissipation applies only if the permitted film temperature is not Resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. TECHNICAL SPECIFICATIONSDESCRIPTIONTNPU0603 e3 TNPU0805 e3 TNPU1206 e3 Imperial size060308051206 Metric size codeRR1608 MRR2012 MRR3216 MResistance range100 to 100 k 100 to 332 k 100 to 511 k Resistance tolerance %; %; %Temperature coefficient 10 ppm/K; 5 ppm/KRated dissipation, P70 (1) WOperating voltage, Umax.

4 ACRMS/DC75 V150 V200 VPermissible film temperature, F max. (1)125 C125 C125 COperating temperature range-55 C to 125 C-55 C to 125 C-55 C to 125 CPermissible voltage against ambient (insulation):1 min; Uins100 V200 V300 VFIT observed x 10-9/h x 10-9/h x 10-9/hTNPU Draloric Revision: 01-Jul-162 Document Number: 28779 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT RESISTANCE CHANGE AT RATED DISSIPATIONOPERATION MODESTANDARDR ated dissipation, P70 TNPU0603 WTNPU0805 WTNPU1206 WOperating temperature range-55 C to 125 CPermissible film temperature, F CMax.

5 Resistance change at P70 for resistance range, | R/R| after:TNPU0603 e3100 to 100 k TNPU0805 e3100 to 332 k TNPU1206 e3100 to 511 k 1000 h %8000 h %225 000 h %TEMPERATURE COEFFICIENT AND RESISTANCE RANGETYPE / SIZETCRTOLERANCERESISTANCEE-SERIESTNPU06 03 e3 10 ppm/K %100 to 100 k E24; E192 5 ppm/K % % %TNPU0805 e3 10 ppm/K %100 to 332 k 5 ppm/K % % %100 to 200 k TNPU1206 e3 10 ppm/K %100 to 511 k 5 ppm/K % % %100 to 200 k TNPU Draloric Revision: 01-Jul-163 Document Number: 28779 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

6 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Products can be ordered using either the PART NUMBER or the PRODUCT / SIZECODEQUANTITYPACKAGING STYLEWIDTHPITCHPACKAGING DIMENSIONSTNPU0603 e3 TNPU0805 e3 TNPU1206 e3E52 = EN1000 Tape and reel cardboard tape acc. IEC 60286-3,Type 1a8 mm4 mm 180 mm / 7"ET1 = EA5000 PART NUMBER AND PRODUCT DESCRIPTIONPart Number: TNPU12061K32 AZEA00 TYPE / SIZERESISTANCETOLERANCETCRPACKAGINGTNPU0 603 TNPU0805 TNPU1206R = DecimalK = ThousandM = Million(4 digits)B = %A = %H = %Y = 10 ppm/KZ = 5 ppm/KEAENP roduct Description: TNPU1206 1K32 % T-16 ET1 %T-16ET1e3 TYPE / SIZERESISTANCETOLERANCETCRPACKAGINGLEAD (Pb)-FREETNPU0603 TNPU0805 TNPU1206 Examples.

7 1K32 = 1320 % % %T-13 = 10 ppm/KT-16 = 5 ppm/KET1E52e3 = Pure tintermination finishNPU12061KT2 AZEA003 TNPU Draloric Revision: 01-Jul-164 Document Number: 28779 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade AI2O3 ceramic substrate and conditioned to achieve the desired temperature coefficient.

8 Specially designed inner contacts are deposited on both sides. A special laser is used to achieve the target value by smoothly fine trimming the resistive layer without damaging the ceramics. A further conditioning is applied in order to stabilize the trimming result. The resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure tin on nickel plating. The result of the determined production is verified by an extensive testing procedure on 100 % of the individual chip Resistors .

9 Only accepted products are laid directly into the tape in accordance with IEC 60286-3 Type 1a (1).ASSEMBLYThe Resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase as shown in IEC 61760-1 (1). The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, potting compounds and their processes, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole Resistors are RoHS compliant, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes.

10 The immunity of the plating against tin whisker growth has been proven under extensive acknowledges the following systems for the regulation of hazardous substances: IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (2) The Global Automotive Declarable Substance List (GADSL) (3) The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (4) for its supply chainThe products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see the products fully comply with the following directives.