User Interface Document - EGNOS Resources

1 Date : 01/02/2002. european space agency Ref : E-RD-SYS-E31-010. GNSS-1 Project Office Issue : 2 Rev. : 0. Page : 1. user Interface Document F lix Tor n and Dr. Javier Ventura-Traveset THIS Document IS THE PROPERTY OF ESA. IT CANNOT BE REPRODUCED IN ANY FORM. OR DISCLOSED TO ANY THIRD PARTIES. WITHOUT WRITTEN AUTHORIZATION FROM ESA. Centre Spatial de Toulouse - 18 Avenue Edouard Belin - 31401 Toulouse Cedex 4 - France Tel. : +33 (0)561 282865 - Fax : +33 (0)561 282866. GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 2. DISTRIBUTION LIST. GNSS-1 Documentation. EGNOS : FT, LG, HS, JV, PM, MD, WE.

2 D/TOS/ETT: Juan Carlos de Mateo, Pedro Pablos, Michel Tossaint, Simon Johns. D/APP: Hans-Hermann Fromm. GISS: Giorgio Solari. ESTB Web Site (Publications Section): .. user Interface Document GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 3. Document CHANGE RECORD. Issue Revision Date Change Status Origin 0 0 15/11/01 Draft FT. 1 0 21/11/01 First release of the Document FT. 2 0 01/02/02 Detailed information about the new FT. SISNeT authorisation process included (major change of the DS2DC protocol). user Interface Document GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 4.

3 TABLE OF CONTENTS. 1. INTRODUCTION .. 6. PURPOSE OF THE 6. ORGANISATION OF THE Document .. 6. READING GUIDELINES .. 6. MAJOR CHANGES INTRODUCED IN ISSUE 7. 2. THE SISNET PLATFORM .. 8. INTRODUCTION .. 8. SISNET 8. IS SISNET USEFUL?.. 9. OVERVIEW OF THE SISNET PLATFORM .. 11. THE BASE STATION .. 13. THE DATA SERVER .. 14. THE user EQUIPMENT .. 17. THE user APPLICATION SOFTWARE .. 17. THE ESA SISNET user APPLICATION SOFTWARE .. 18. ESA SISNET-BASED DEVELOPMENTS .. 19. REAL-TIME MONITORING OF THE ESTB PERFORMANCE .. 21. POSITIONING THROUGH THE INTERNET .. 22. REAL-TIME ANALYSIS OF THE ESTB MESSAGES .. 23. REAL-TIME MONITORING OF THE ESTB SIS STATUS THROUGH THE INTERNET.

4 27. SUMMARY .. 28. 3. user APPLICATION SOFTWARE DEVELOPMENT .. 29. INTRODUCTION .. 29. HOW TO DEVELOP THE UAS?.. 29. HOW TO DEVELOP THE DS2DC CLIENT?.. 30. 33. 4. TECHNICAL SPECIFICATIONS OF THE DS2DC 34. INTRODUCTION .. 34. THE DS2DC PROTOCOL .. 34. FUNDAMENTALS OF THE ESA DS2DC PROTOCOL .. 34. AVAILABLE DS2DC COMMANDS .. 36. THE AUTHENTICATION 39. THE SINCA COMPRESSION ALGORITHM .. 40. SINCA DECOMPRESSION ALGORITHM .. 42. SUMMARY .. 44. user Interface Document GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 5. 5. PROGRAMMING TIPS AND SOURCE CODE 45. INTRODUCTION .. 45. IMPLEMENTATION OF THE CLIENT SOCKET.

5 45. REQUESTING AND OBTAINING THE EGNOS MESSAGES .. 48. DISPLAYING THE TEXT MESSAGES BROADCAST BY SISNET .. 50. SUMMARY .. 52. 6. REFERENCES .. 53. 7. LIST OF 55. APPENDIX A. DS2DC COMMAND REFERENCE.. 56. AUTH COMMAND .. 56. *AUTH COMMAND .. 57. *ERR COMMAND .. 58. MSG 59. *MSG 60. *TXT COMMAND .. 61. APPENDIX B. SISNET ERROR CODES AND ERROR MESSAGES.. 62. user Interface Document GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 6. 1. INTRODUCTION. Purpose of the Document This Document provides a description of the SISNET user Interface at different abstraction levels. The main purpose is to provide all the necessary knowledge for the development of SISNET-based Software applications.

6 The concepts and techniques exposed in this Document shall be carefully applied in any SISNET development, in order to obtain SISNET - compliant software. Organisation of the Document The Document is organised as follows: Chapter 1 explains the objectives of this user Interface Document (UID) and presents an overview of its contents. Chapter 2 provides a top-level view of the SISNET platform, demonstrating its utility and describing all the components of the platform. In addition, the SISNET power is demonstrated through some ongoing SISNET developments. Chapter 3 introduces all the high-level knowledge necessary for the development of SISNET applications.

7 Chapter 4 focuses the development of the most important component of any SISNET. application: the DS2DC client. The DS2DC protocol and the SINCA compression algorithm are explained in detail. Chapter 5 shows some source code samples, which may be useful for the development of SISNET applications. The source code is written in C++ language, and adapted to the Borland C++ Builder Development Environment. Chapter 6 presents some bibliography for further reading. Chapter 7 shows a list of the acronyms used in this Document . Reading Guidelines The Document is characterised by a top-down design. It starts from a top-level view of the SISNET.

8 Platform, and goes down to low-level aspects. Therefore, this nature makes the intended readership flexible. Depending on the reader's background on Software Engineering, more or less Chapters must be read. user Interface Document GNSS-1 Project Office Ref : E-RD-SYS-E31-010. Issue : 2 Rev. : 0 Date : 01/02/2002 Page : 7. A reader with a basic background on Software Engineering (SE) should well follow Chapters 2 and 3, obtaining a clear top-level view of the SISNET technology and the general ideas about the UAS. development process. Chapter 4 takes contact with Software development, using an architectural and algorithmic point of view.

9 That Section has interest for the Engineers who plan to develop a SISNET application, giving a clear idea of what to do, before start coding. Therefore, high-level knowledge about programming is required. Finally, Chapter 5 presents the most technical information, providing source code to help in the development process. That Section is oriented to the Software developer, since it requires technical knowledge in Programming. It is important to note SISNET is platform-independent and language- independent. Therefore, this Document (and the source code) can be used to implement SISNET. applications under any platform and using any programming language.

10 Major Changes Introduced in Issue This Issue of the Document introduces major changes with respect to the previous version (Issue 1, Revision 0). Those changes regard to a significant change on the operational philosophy of SISNeT, on the definition of the DS2DC protocol. In particular, the major change is the introduction of a new user authentication process before starting any dialogue with the SISNeT. Data Server. The most relevant changes to the Document are concentrated in Chapter 4, and Appendices A and B. These changes involve, in first place, the introduction of new authentication-related DS2DC. commands, supporting the new process.