User Manual - Swatch

1 USER MANUAL1/6BC = 1/10 = 1/2 SETTINGSTANdARddISpLAyChRoNo AUToMATICRETRoGRAdEA: Minutes counter (60 minutes)A1: 5 minutes counter (60 minutes)A2: Minutes counter (30 minutes)B: Seconds counterC: 1/10 second counterC1: 1/2 minutes counterC2: 6 minutes counter (6 hours)d: push-buttonE: CrownF: push-buttonG: hours handh: Seconds handI: Minutes handJ: Light FunctionA: Normal position of the crownC: position for setting the time To set the time, pull the crown out to posi-tion C and turn clockwise or anti-clockwise. After resetting has been completed, press the crown back to position B CA B CA B CUSER MANUAL2 /6 SETGOA B CA B CdATE SETTINGTo set the date, pull the crown out to posi-tion B and turn clockwise or anticlockwise.

2 After resetting has been completed, press the crown back to position The upper push-button to start the The lower push-button to read the intermediary once again to continue (repeat the las two actions as many times as you wish to read the intermediary time while the chrono carries on).4. The upper push-button to stop The lower push-button to MANUAL3 /6 Add The upper push-button to The upper push-button to read the firs The upper push-button to restart the The upper push-button to read the additional time (repeat these two steps as many time as you wish).5. The lower push-button to The upper push-button to start the once again to read the elapsed The lower push-button to : The duration of timing is limi-ted to 2 MANUAL4/6 STARTSTOPRESET112233 TAChyMETERSTANdARdMeasure the speed Base 100 or 1000 m.

3 The upper push-button when an action once again to stop after a distance of 100 or 1000 m. Read the speed indica- ted by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).3. The lower push-button to B CA B CA B CA B CA B C12A B C3456 STANdARdREAdJUSTMENTA djusting the chronograph (e. g.: after battery change or a hard shock)1. pull the crown to position press the upper button to reach the position 12h00 with the hand of the 1/10 seconds press the lower button to reach the position 12h00 with the hand of the pull the crown to the position press the upper button to reach the position 12h00 with the hand of the minutes press the crown to position MANUAL5 /6A B CA B CA B CA B CA B CA B C123456 RETRoGRAdEAdjusting the chronograph (e.)

4 G.: after battery change or a hard shock)1. pull the crown to position press the lower button to reach the position 0 with the hand of the minutes press the crown to the position press the upper button to reach the position 3h00 with the hand of the seconds press the lower button to reach the position 0 with the hand of the 1/2 minute counter. 6. press the crown to position B CA B CA B CA B CA B CA B C123456 IRoNy chrono MEdIUMA djusting the chronograph (e. g.: after battery change or a hard shock)1. pull the crown to position press the lower button to reach the position 12h00 with the hand of the minutes press the crown to the position press the upper button to reach the position 12h00 with the hand of the seconds press the lower button to reach the position 12h00 with the hand of the 1/10 sec.

5 Press the crown to position MANUAL6 /6P1P1P2P2P1P1P1P2P2P2 SKIN ChRoNoAdjusting the chronograph (e. g.: after battery change or a hard shock)1. Simultaneously p1 + p2 until A, B and C complete the p2. A completes a whole p1 to align p2 again, and B completes a whole p1 to align p2 again, and C completes a whole p1 to align Simultaneously p1 + p2 again, to com plete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If p1 + p2 are not pressed within 5 seconds, the watch will carry out the acknowledge- ment function automatically.