User's Guide (Full version) - instax | FUJIFILM

1 User's Guide (Full version) instax mini Link1NA_EN2 Table of ContentsBefore Use 3 Notes on Disposing of the Printer 3 Part Names 3 Installing the App 4 Charging the Battery 4 Battery Status Indication with the LED Light on Printer 4 Charging Status Indication with the LED Light on Printer 4 Loading/Unloading the instax mini Film Pack 5 Loading the Film Pack 5 Unloading a Used Film Pack 6 Turning on/off the Printer

2 6 Checking the Printer Status with the LED Light on Printer 6 Connecting and Printing 7 When Establishing Connection for the First Time 7 When the Printer and Your Smartphone Are Already Connected 9 Reprinting an Image 10 Controlling the App with the Angle of the Printer and the Power Button 10 Changing the App Mode When the Top Screen Is Selected on the App 10 Controlling Zoom and Shutter When Using the instax Camera on the App 11 Specifications 11 Troubleshooting 12 IMPORTANT SAFETY NOTICE 13 Common Sense Printer Care 13 Bluetooth Devices: Cautions 14 Independent JPEG Group (IJG) LicensesThis software is based in part on the work of the Independent JPEG Group.

3 2019 FUJIFILM Corporation. All rights UseBefore using the printer, check to make sure you have the Accessories USB cable for charging (1)(BOD700) User's Guide (1)Notes on Disposing of the PrinterA built-in lithium ion battery is used for this you dispose of the printer, follow your local regulations and dispose of it proper disposal in the United States at product end-of-life, please contact 1-800-800-3854 Option #1 not attempt to remove the built-in battery. Injury may IMPORTANT SAFETY NOTICE (p. 13) for safety Names When you use the printer for the first time, be sure to fully charge the Film ejection slot2 Power button/LED*13 USB port cover4 USB port5 Reset button*26 Film door lock7 Film door*1 For details on the LED indication, see pages 4 and 6.*2 If the printer does not work properly, press the reset button to reset the printer. Keep in mind the printer will not work properly if the battery is not properly the AppPlease install the instax mini Link Smartphone App on your smartphone before using the printer.

4 If you are using an Android OS smartphone, please search for the instax mini Link Smartphone App in Google Play Store and install it.*Requirements for Android OS smartphones: Android Ver. or higher with Google Play Store installed If you are using an iOS smartphone, please search for the instax mini Link Smartphone App in the App Store and install it.*Requirements for iOS smartphones: iOS Ver. or higher Depending on your smartphone model, you may not be able to use the instax mini Link Smartphone App even if you have installed it and your smartphone meets the above the instax mini Link App download site for the latest information on system requirements Charging the BatteryBe careful to properly attach the USB cable as that USB AC adapter is not included, but is typically provided with your an indoor power outletConnect the printer with a USB AC adapter supplied with your smartphone (not included with instax mini Link printer) using the supplied USB cable, then connect the USB AC adapter to an indoor power outlet.

5 You can print an image while charging is in progress. Charging time is approximately 80 to 120 Status Indication with the LED Light on PrinterYou can check the battery status when the printer is turned on and not connected to the can also check the battery status with your smartphone when connected to the statusLED lights up in redLow levelLED lights up in greenOver half levelCharging Status Indication with the LED Light on PrinterYou can check the charging status with the statusLED flashes in redChargingLED flashes in greenAlmost chargedLED lights up in green (When the printer is turned on and not connected to the App)ChargedLED goes off (When the printer is turned off )ChargedCharging from a PC: Connect the printer and PC directly. Do not connect via a USB hub or keyboard. If the PC goes into sleep mode while charging, charging is discontinued. To continue charging, exit sleep mode and then reconnect the USB cable.

6 The battery may not be able to charge depending on the specifications and settings or conditions of the PC .5NA_ENNotes The battery cannot be removed. The battery is not fully charged when shipped. Be sure to charge the battery before use. For notes about the battery, see Common Sense Printer Care . ( )Loading/Unloading the instax mini Film PackCautionDo not open the film door until you have used up the film; otherwise, the rest of the film will become exposed and turn white The film can no longer be used When you load the film pack, never press the two rectangular holes on the back of the film pack. Never use a film pack beyond its shelf life; otherwise, it may damage the FUJIFILM instax mini instant Print Film only. The instax SQUARE Film or instax WIDE Film cannot be on the film pack Each FUJIFILM instax mini Film pack contains one black film protective cover and 10 film sheets.

7 Do not remove the film pack from its inner bag before loading it into the printer. The film cover is ejected automatically when the film door is details, refer to the instructions and warnings on the package of FUJIFILM instax mini instant Print the Film Pack1 Slide and hold the film door lock and open the film Insert film pack by aligning the yellow marks 21 NoteBe sure to align the yellow marks on the printer and on the film Close the film door 4 Remove the black film cover that is automatically rejected Unloading a Used Film Pack1 Slide the film door lock and open the film door 122 Grasp the rectangular holes on the film pack, then pull film pack out from the printer 21 Turning on/off the PrinterPress and hold the Power button for approximately 1 second to turn the printer on or the printer on lights up the no operation occurs for roughly 10 minutes, the printer turns off the Printer Status with the LED Light on PrinterYou can check the printer status with the LED.

8 ColorLED statusStatusBlueLightingConnecting to the App/Print modeOrangeLightingConnecting to the App/Fun modePinkLightingConnecting to the App/ instax Camera modeWhite Flashing wave-like formConnecting to the App/Operation screenWhiteFlashingFirmware is being updatedPurpleLightingReprintingRainbow colorFlashingTransferring an image *Flashing*PrintingYellowLightingCritical error occurredYellowFlashing quicklyNon-critical error occurredYellowFlashing slowlyMinor error occurredRedFlashingChargingGreenFlashing Almost chargedGreenLightingCharged (When the printer is turned on and not connected to the App)*During printing, the color of the flashing LED changes depending on the main colors of the image being and PrintingWhen Establishing Connection for the First Time1 Press and hold the Power button for approximately 1 second to turn the printer on The LED lights Start the downloaded instax mini Link App 3 Read the terms of use, then put a checkmark in the [Agree to this content] box, and tap [Agree to this content ] 4 Quick instructions are displayed Read the instructions and tap [I Understood ] Set the [Bluetooth Connection] to [Later].

9 [Bluetooth Connection] can also be set in the process of printing. 5 Select the desired image to be printed 88 When a printer is connected, tap [Close] 9 Tap again The printer starts When the film has been ejected (the printer stops making a sound), hold the edge of the film, then take it out You can confirm the number of films remaining on the screen of the Tap or swipe the image up on the screen Before tapping , tapping on the lower right adjusts the image and tapping on the lower left applies a filter to the your Bluetooth settings are switched off, the following screen [Please turn on Bluetooth] opens the Bluetooth settings screen. Put the Bluetooth settings When a printer is detected, tap [Connect] If multiple printers are detected, select the printer you would like to connect to from the the printer s identifier (device name) on the bottom of the the Printer and Your Smartphone Are Already Connected1 Press and hold the Power button for approximately 1 second to turn the printer on The LED lights Start the downloaded instax mini Link App 3 Select the desired image to be printed 4 Tap or swipe the image up on the screen The printer starts tapping , tapping on the lower right adjusts the image and tapping on the lower left applies a filter to the When the film has been ejected (the printer stops making a sound)

10 , hold the edge of the film, then take it out You can confirm the number of films remaining on the screen of the the App with the Angle of the Printer and the Power ButtonWhen this printer is linked with the App on your smartphone or tablet, you can control the App by tilting the printer. (Smartphone App linked function)For details, refer to the FAQ of the instax mini Link Smartphone sure that [Camera operation settings] is set to [ON] on the instax mini Link App. When it is set to [OFF], this function is the App Mode When the Top Screen Is Selected on the AppStand the printer up to switch to Print the printer down with the Power button facing up to switch to Fun You can change the App mode using the printer only when the top screen is selected. The Fun mode and Print mode buttons on the screen can be used regardless of the selected an ImageYou can reprint the image you last printed by using the Reprint motion sensor the printer over with the film ejection slot facing down and press the Power When the printer is connected to the App and the App is in instax Camera mode, you cannot use the reprint function.