V-BAND CLAMPS/COUPLINGS - Clampco Products: …

1 Clampco PRODUCTS, CLAMPS/COUPLINGS18 How to Determine Your V-BAND clamp /CouplingDescription CodeClampco s description code contains 7 segments, each representinga different part of the is a sample description code:V01-3-52- 00-N- 0588-S2It s easy to create your made-to-order V-BAND clamp / coupling descriptioncode, just follow these 7 easy steps:1. Determine Latch & band or Strap Style CodeV01-3-52-00-N-0588-S22. Determine Number of Retainer SegmentsV01-3-52-00-N-0588-S23. Determine Retainer Series CodeV01-3-52-00-N-0588-S24. Determine Product Design CodeV01-3-52-00-N-0588-S25. Determine Bolt CodeV01-3-52-00-N-0588-S26. Determine Retainer Inside Diameter CodeV01-3-52-00-N-0588-S27. Determine Nut, Knob, or T-Handle CodeV01-3-52-00-N-0588-S2 Made-to-OrderClampco V-BAND Couplings, also known as V-BAND Clamps or V-Clamps, join flangeswith V-shaped profiles.

2 A V-BAND coupling operates by exerting a wedging load,which squeezes the flanges together. The V-BAND Couplings can be designed to workwith or without gaskets and O-rings. The material gauge, latch style, and numberof retainer segments all vary depending on the requirements for each application. V-BAND Couplings eliminate theneed for cumber some boltedflange designs and costly weldedflange designs. Because V-BandCouplings can be easily assembledand disassembled, they are oftenused on equipment that requiresfrequent service or V-BAND applica tionsinclude pumps, engines, exhaustsystems, filters, and food andchemical processing equip LATCHThe Clampco T-bolt latch is used for permanent or semi-permanent applications and/or safety on pressurizedsystems.

3 The T-bolt latch is our most economical OVER CENTER LATCHThe light-duty over center latch is used on applicationsthat require frequent assembly or disassembly. No toolsare required for opening and closing the clamp afterinitial installation. This latch style is ideal for light-dutyapplications on small diameters and requires a 3 T-bolt. (Note: Not recommended for pressurized applications)MEDIUM-DUTY OVER CENTER LATCHThe medium-duty over center latch is well suited forheavier applications and on larger diameters. No toolsare required for opening and closing the clamp afterinitial installation. It is available with either a 1 4in. or5 16in. diameter T-bolt.(Note: Not recommended for pressurized applications)HEAVY-DUTY OVER CENTER LATCHThe heavy-duty over center latch is well suited forheavy-duty applications and large diameters.

4 It isavailable with 3 8in. diameter T-bolt.(Note: Not recommended for pressurized applications)SADDLE QUICK RELEASE LATCHThe saddle quick release latch is also used for easeof dis assembly and where the ability to replace bolts isdesired. It is not recommended for diameters larger than10 in. [254 mm] due to trunnion/ band RELEASE LATCHThe Clampco quick release latch is used for ease ofdisassembly and is required where the ability to replacebolts is LATCH STYLESCODELATCH STYLEV01TT-BoltV02 TQuick ReleaseV03 TSaddle Quick ReleaseV07 TLight-Duty Over CenterV09 TMedium-Duty Over CenterVO1 TVO2 TVO3 TVO7 TVO9 TSTRAP BANDS: SINGLE LATCHS trap band Styles are more economical fordiameters 8 -10 in. [203-254 mm] and STYLEV11 TTwo T-BoltsV21 TQuick Release and T-BoltV31 TSaddle Quick Release and T-BoltV71 TLight-Duty Over Center and T-BoltV91 TMedium-Duty Over Center and T-BoltV11TV21TV31TV71TV91 TSTRAP BANDS: MULTIPLE LATCHESS trap band Styles are more economical fordiameters 8 -10 in.

5 [203-254 mm] and DETERMINE LATCH & band OR STRAP STYLE CODE2. DETERMINE NUMBER OF RETAINER SEGMENTSC lampco offers several latch styles and latch combinations for your the code that corresponds with the best design for your (Sample Description Code)V01-3-52-00-N-0588-S2(Sample Description Code)CODELATCH STYLEV01T-BoltV02 Quick ReleaseV03 Saddle Quick ReleaseV07 Light-Duty Over CenterV09 Medium-Duty Over CenterNUMBER OF LATCH DESCRIPTIONSEGMENTSOne-segment retainers are available for large couplings (approximately 12 in. [ mm] and larger). One-segment retainers are difficult to install 1due to their inherent stiffness. Therefore, they should be used on permanent applications. One-segment retainers can only be used with latch & band styles V01, V02, V03, V07, V09, V01T, V02T, V03T, V07T,and retainers are also generally used forV- band Couplings 8-10 in.

6 [203-254 mm] and , they provide increased installation and2removal flexibility. Two-segment retainers areprimarily recommended for double latch clamps butcan be used with single latch clamps. Please note:Two-segment retainers CANNOT be used with latch& band styles V01T, V02T, V03T, V07T and V09 TNUMBER OFLATCH DESCRIPTIONSEGMENTST hree-segment retainers are used for all couplingdiameters, especially those 8-10 in. [203-254 mm]and smaller. Three-segment retainers provide3even greater ease of assembly and disassemblyand offer the best balance between functionalityand economy. Three-segment retainers can onlybe used with latch & band styles V01, V02, V03,V07 and retainers are only recommendedfor exceptionally large couplings where two orthree segments are not adequate.

7 Four-segment4retainers can only be used with latch & bandstyles V01, V02, V03, V07, V09, V11, V21, V31,V71 and offers one, two, three, and four-segment V-BAND BANDS: SINGLE LATCHFull band Styles are recommended wheregreater strength is STYLEV11 Two T-BoltsV21 Quick Release and T-BoltV31 Saddle Quick Release and T-BoltV71 Light-Duty Over Center and T-BoltV91 Medium-Duty Over Center and T-BoltV11V21V31V71V91 FULL BANDS: MULTIPLE LATCHESFull band Styles are recommended wheregreater strength is PRODUCTS, CLAMPS/COUPLINGS203. DETERMINE RETAINER SERIES CODEV01-3-52- 00-N-0588-S2 (Sample Description Code) Clampco is currently tooled for over 20 standard retainer retainer shapes mate with the most common industrialflange profiles.

8 To arrive at the proper retainer series for yourapplication, please consider the following factors: the designand dimensions of the mating flanges; operating pressure andtemperature; whether or not gaskets or O-rings will be used;and what the system will carry (fluid, dry bulk solids, air, etc.). ENGLISH (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPaDIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP THICKNESS OF .031 in. [.787 mm]RETAINER THICKNESS OF .040 in. [ mm]RETAINER THICKNESS OF .050 in. [ mm]ENGLISH (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP THICKNESS OF.

9 062 in. [ mm]ENGLISH (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP THICKNESS OF .080 in. [ mm]ENGLISH (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP THICKNESS OF .090 in. [ mm]ENGLISH (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP (inches)METRIC (millimeters)COUPLINGPRESSURE IN PSICOUPLINGPRESSURE IN MPa DIAMETERFULL BANDSTRAP BANDDIAMETERFULL BANDSTRAP THICKNESS OF .070 in. [ mm]WARNING: The pressure ratings shown are the maximum pressures thatwill not cause yielding of any component.

10 The ratings are for V-BandClamps/Couplings with the following: 301 annealed retainers with 40degree included angles; 301/302/304 1 4hard or 1 2hard bands; andoperating at ambient temperatures of 70 degrees F. See the Materialsand Temperatures Chart on page 36 to calculate pressure ratings fordifferent materials and temperatures. Do not use pressure ratings for overcenter latch styles or for any other latch styles that are tightened by pressure must be released before coupling is THICKNESS OF .031 in. [.787 mm]RETAINER THICKNESS OF .040 in. [ mm]RETAINER THICKNESS OF .050 in. [ mm]RETAINER THICKNESS OF .062 in. [ mm]RETAINER THICKNESS OF .070 in. [ mm]RETAINER THICKNESS OF .080 in. [ mm]RETAINER THICKNESS OF.