Valves, Automation & Controls SERIES 77

1 Valves, Automation & ControlsSERIES 773 & 4 WAY HIGH PERFORMACEBALL VALVE*Mounting bracket must be used for high temperature (>180o F) and steam applications. SERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708) 562-9250 & Features Body Material316 Stainless Steel & Carbon Steel Full Port Design All sizes from through 4 are full port designs at all rated to 600 CWP. Stem DesignLive-loaded, bottom entry, blowout proof stem featuring packing that extends valve cycle life over conventional ball valves and is best choice for actuation. Stem seals are live-loaded using Belleville springs to provide consistent sealing forces, reducing or eliminating the need for frequent seal adjustment. ISO 5211 Integral Direct Mount Mounting PadDirect mount pad eliminates need for brackets and couplers*.Ideal for may be retrofitted on existing Sharpe SERIES 77 without disruption of line for secondary containment unit to be added when necessary.

2 Multiport ConfigurationsThe Sharpe SERIES 77 Valves are ideal choices for many piping designs involving diverting or mixing. In certain applications a single SERIES 77 valve can replace two, three or four 2-way valves, reducing cost and saving space. 4-Seat Design3-way and 4-way SERIES 77 valves utilize four seats to securely support the ball. Trunnion Support Ball Sizes 2 and larger valves incorporate a trunnion-supported ball for positive centering and reduced seat wear. End ConnectionsSeries 77 valves are available in many end connections, including threaded, socket weld and 150# flanged. Lockable Handle All Sharpe SERIES 77 valves are supplied with lockable lever or pipe handles. Traceability Body and end piece castings are marked with heat codes providing traceability to the chemical analysis and material test reports performed at the foundry. CMTR s (Certified Material Test Reports) are available upon 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708)

3 562-9250 & Materials - 1/2 - 1 1/2 NameQtyMaterial1 Body1316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**2 Ends3 or 4316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**3 Ball1316 Stainless Steel4 Seat4 TFM 1600/TFM Cavity Filler5 Stem1316 Stainless Steel6 Lower Thrust Washer1 TFM 16007 Body Seal4 PTFE8 Chevron Stem Packing1 setPTFE9 Thrust Washer1 TFM 160010 Gland1300 SERIES Stainless Steel11 Belleville Washer4 SUS304-CSP12 Socket Set Screws1300 SERIES Stainless Steel13 Stem Nut1300 SERIES Stainless NameQtyMaterial14 Washer1300 SERIES Stainless Steel15 Handle 1300 SERIES Stainless Steel16 Handle Sleeve1 Vinyl17 Stop Bolt1300 SERIES Stainless Steel18 Stop Nut1A2-7019 Bolts16300 SERIES Stainless Steel20 Bolt Washer16300 SERIES Stainless Steel21 Stop Plate1300 SERIES Stainless Steel22 Handle Adapter 1300 SERIES Stainless Steel23 Bolt1300 SERIES Stainless Steel24 Nut1300 SERIES Stainless Steel25 Body Flange1/0*316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**26 Nut1300 SERIES Stainless Steel*1 for 3-way, 0 for 4-way**POASERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708)

4 562-9250 NameQtyMaterial1 Body1316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**2 Ends3 or 4316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**3 Ball1316 Stainless Steel ASTM A351 CF8M4 Seat4 TFM 1600/ TFM Cavity Filler5 Stem1316 Stainless Steel6 Lower Thrust Washer2 TFM 16007 Body Seal4 PTFE8 Chevron Stem Packing1 setPTFE9 Thrust Washer1 TFM 160010 Gland1300 SERIES Stainless Steel11 Belleville Washer4 SUS304-CSP12 Socket Set Screws1300 SERIES Stainless Steel13 Stem Nut1300 SERIES Stainless Steel14 Washer1300 SERIES Stainless Steel15 Handle 1300 SERIES Stainless NameQtyMaterial16 Handle Sleeve1 Vinyl17 Stop Bolt1300 SERIES Stainless Steel18 Stop Nut1A2-7019 Stud20300 SERIES Stainless Steel20 Stud Washer20300 SERIES Stainless Steel21 Stop Plate1300 SERIES Stainless Steel22 Handle Adapter 1300 SERIES Stainless Steel23 Bolt1300 SERIES Stainless Steel24 Nut1300 SERIES Stainless Steel25 Body Flange1/0*316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**26 Stud Nut20300 SERIES Stainless Steel27 Body Cover1316 Stainless Steel ASTM A351 CF8 MCarbon Steel ASTM A216 WCB**28 Cover Seal1 PTFE29 Bushing1 TFM 1600 Parts & Materials - 2 - 4 * 1 for 3-way, 0 for 4-way** POAThe dimensions above are for information only.

5 Please refer to Sharpe Valves if you need dimensions for construction. SERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708) 562-9250 - 1/2 - 1 1/2 SizeAB1B2C dDE FHJKLM O PQS T Z1 (F04) (F05) (F05) (F07) dimensions above are for information only. Please refer to Sharpe Valves if you need dimensions for construction. SERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708) 562-9250 dDE FHJKLM O PQS T (F07) 1 (F10) (F10) (F10) 1/8-12 - 2 - 4 SERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Smith-Cooper international toll Free (877) 774-2773 Fax (708) 562-9250 SizeT PortL Port1/21383/42213135211-1/285492160932-1 /226715433652114649375 Valve SizeIN-LB1/21133/416513121-1/253827552-1 /214753147541736 Torque DataCv Data010020030040050060070080005010015020 0250300350400450500550 Pressure (PSIG)Temperature ( F)Pressure-Temperature Ratings SERIES 77 TFM Valve SizeBodyThreaded Socket Weld Butt WeldFlanged EndClamp EndBlind End150 Lb300 Lb1/2" " " " " " " " Weight (Lbs.)

6 SERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE 131 Technical Information* POSITION 1T-PORT 90 TURNPOSITION 1 POSITION 1 POSITION 1P2 NOITISOP2 NOITISOP2 NOITISOP2 NOITISOPOSITION 2 POSITION 1 POSITION 3 POSITION 3 POSITION 2 POSITION 1T- PORT 180 TURNL - PORT 90 TURNPOSITION 2 POSITION 1 POSITION 3 POSITION 2 POSITION 1 POSITION 3 POSITION 1 POSITION 1 POSITION 2 POSITION 2LL - PORT 90 TURNPOSITION 1 POSITION 1L - PORT 180 TURNL - PORT 180 TURNPOSITION 2 POSITION 2 POSITION 3 POSITION 3T-PORT 270 TURNPOSITION 2 POSITION 1 POSITION 3 POSITION 44 - WAY 90 TURNFLOW PLAN 3 FLOW PLAN 4 FLOW PLAN 1 FLOW PLAN 2 FLOW PLAN 5 FLOW PLAN 68 NALP WOLF7 NALP WOLFFLOW PLAN 1101 NALP WOLF9 NALP WOLFFLOW PLAN 12 FLOW PLAN 13 POSITION 3 POSITION 4 FLOW PLAN 14* SERIES 77 Valves are not to be used as an isolation to OrderDue to continuous development of our product range, we reserve the right to change the dimensions and information for this product as & StemSeatSealEndsEnd Cap TypeFlow Plan1/22776316 Stainless Steel6316 Stainless SteelMTFM SeatTPTFE6316 Stainless SteelAThreaded Ends (2-1/2 - 4 )**183/42-1/24 Carbon Steel**CTFM Cavity Fill4 Carbon Steel**BSocket Weld (2- 1/2 - 4 )**2913 CButt-weld Sch.

7 10,40,&80**3101-1/24D150# RF Flange411512613714 TFM is a registered trademark of Dyneon, LLC**POAToll Free 877-774-2773 Fax Angeles, CA Chicago, IL Atlanta, GA Vancouver, WASERIES 77 3 & 4 WAY HIGH PERFORMANCE BALL VALVE Rev 4/17