VIA 3 LED - lumenwerx.com

1 VIA 3 LEDPENDANT DIRECT asymmetric V. 2/ INDIRECT Name: VIA3-PENDANT-DIRECT-ASY-INDIRECT-ASY-SPE CA pril 25, 2019 Page: 1 / (T) 514-225-4304 (F) 514-931-4862 All rights are reserved to LumenWerx ULC. LumenWerx ULC. reserves the right to change or modify product specifications without notificationORDER GUIDEVIA3 PDIARO2 AROLEDLUMINAIRE IDDIRECT OPTICSINDIRECT OPTICSLIGHT SOURCECRIDIRECT LUMEN PACKAGESVIA3 PDI - via 3" pendant direct/indirectARO2 - asymmetric reflector optic version 2 ARO - asymmetric reflector opticLED - high performance LED80 - 80 CRI90 - 90 CRI375 - min. low output 375lm/ft500 - medium output 500lm/ft750 - max. high output 750lm/ft#### - other required lm/ftINDIRECT LUMEN PACKAGESCOLOR LENGTHVOLTAGEDRIVERELECTRICAL375 - min. low output 375lm/ft500 - medium output 500lm/ft750 - max.

2 High output 750lm/ft#### - other required lm/ft30 - 3000k35 - 3500k40 - 4000kStandard sections - 2', 3', 4', 5', 8' & 12'For all other specify length#FT - nominal length in feet#IN - length in inchesContinuous Run - for luminaires over 12'Minimum Individual section 2'120 - 120V277 - 277 VUNV - 120V-277V347 - 347V (not available with Lutron)D1 - 1% dimming 0-10 VDA - DaliLTEA2W - Lutron 1% - 2 wires 120 VLDE1 - Lutron 1% Eco Dim to OffLDE5 - Lutron 5% EcoSystem1 - 1 circuit2 - 2 circuits+#EB - emergency battery (min 8' fixture, except Lutron)+#EM - emergency light circuit+#NL - night light circuit+GTD### - generator transfer device, 120V or 277V55 WSW18 MOUNTINGFINISHCONTROLSOPTIONS55 WSW18 - power 5" + non power 5" white canopy & stem (18" stem)For all other options refer to our Pendant Mounting GuideW - matte whiteAL - aluminumB - matte blackCF# - custom finish specify RAL#GROUPED CONTROLSLSC - Local systemNSC - Network systemFU - fuseCU - customSee page 2 for ordering code detailed informationPROJECT:TYPE:NOTES:DESCRIPTIO NVia 3 features our Asymmetrical Lens Optic for smooth, comfortable and efficient illumination of vertical surfaces.

3 Via 3 asymmetric offers a wide range of lumen packages, color choices, electrical and controls options. It is part of the larger Via family, which includes visually coordinated recessed and mounted luminaires, as well as other light distributions, including wall washing and symmetric to 121 lm/w performanceCROSS SECTION4 3/16"3 1/32"VIA3 PDI - stem asymmetricWidespread Indirect OpticsShown with ARO2 opticsVIA 3 LEDPENDANT DIRECT asymmetric V. 2/ INDIRECT Name: VIA3-PENDANT-DIRECT-ASY-INDIRECT-ASY-SPE CA pril 25, 2019 Page: 2 / (T) 514-225-4304 (F) 514-931-4862 All rights are reserved to LumenWerx ULC. LumenWerx ULC. reserves the right to change or modify product specifications without notificationOPTICSD irect asymmetric Refractive Optic V. 2 (ARO2) - The Lumenwerx asymmetric Refractive Optic V. 2 (ARO2) has a directional Gaussian light distribution with peak intensity at 20 above nadir and 55 FWHM (Full Width at Half Maximum) beam angle.

4 ARO2 uses a highly reflective finished reflector combined with a matte beam shaping diffusing film to create a smooth, effective downward component without shadows or hot spots. No external shielding is required. Microstructure material applied to the snap-in lens provides the precise refractive power and visual comfort, while achieving high luminous efficacy over 120 lumens per Reflector Optic (ARO) has a split light distribution: a modified lambertian distribution with peak intensity at nadir to one side and batwing with peak intensity at 40 to the other. ARO uses a matte finished reflector combined with a high-transmission diffusing film. A visor shields luminaire hardware from lateral viewing angles. ARO is also available in an indirect SOURCE - LEDC ustom Linear array of mid-flux LED s are aluminum-mounted for optimal thermal performance.

5 Available in 3000K, 3500K and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize efficacy and lumen LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise PER 4' AT 4000 KMedium Indirect Output (2000 Lumens)LED outputColor TempWattsDirect LumensIndirect LumensTotal Nominal Delivered LumensEfficacy LPWlow 114medium 116high 118 Low Indirect Output (1500 Lumens)LED outputColor TempWattsDirect LumensIndirect LumensTotal Nominal Delivered LumensEfficacy LPWlow 118medium output4000K29200015003500 120high output4000K37300015004500 121 LUMINAIRE LENGTHVia 3 is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined together to create longer continuous run lengths.

6 Exact run length must be noted in the product code. The minimum individual section available is 2 foot, and continuous run lengths can be ordered in 2 inch individual sections are joined together onsite using the joiner kits provided. LumenWerx offers joiner kits that are extremely simple to work with in the field and result in a fixture that appears virtually seamless with no light leak at any system for Via 3 direct/indirectELECTRICALF actory-set, adjustable output current LED driver with universal (120-277 VAC) input. Dimmable from 100% to 1% with 0-10V dimming control. Rated life (90% survivorship) of 50,000 hours at 50 C max. ambient (and 70 C max. case) temperature. At maximum driver load: Efficiency>84%, PF> , THD<20%. Other specifiable options include Lutron Hi-Lume 1% (specify 2-wire, or Ecosystem Dim-to-Off), Lutron 5-Series (5% Ecosystem), DMX (RDM compatible) and DALI protocol drivers.

7 All of our standard 0-10V drivers are NEMA 410 installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens per 4ft (25 C) emergency lighting output. Recharge time of 24 OPTIONSF ixtures can be pendant-mounted, using a otherwise specified, LumenWerx provides the following hardware:For stem mounted fixtures - 55 WSW18 (5" white canopy for all power mounting point, and non power mounting point, and a 18" white stem)Caddy clips, if required specify under OPTIONSFor all other options, see our website for a detailed Pendant Mounting GuideVIA 3 LEDPENDANT DIRECT asymmetric V. 2/ INDIRECT Name: VIA3-PENDANT-DIRECT-ASY-INDIRECT-ASY-SPE CA pril 25, 2019 Page: 3 / (T) 514-225-4304 (F) 514-931-4862 All rights are reserved to LumenWerx ULC.

8 LumenWerx ULC. reserves the right to change or modify product specifications without notificationFINISHI nterior - 95%, reflective matte powder coated white paintExterior - matte white, matte black or aluminum powder finishes are also offers several options for integrating occupancy and daylight controls. Whether a sensors control its own fixture or is part of a group of fixtures, lights can be automatically controlled according to different energy saving Grouped Controls, on-board or remote sensor are part of a either a local or network sensor infrastructure. It s possible to scale the controls, from a switch to a fixture setup, to a room or a whole building Occupancy and or daylight CONTROLSL ocal systems permit added flexibility and interconnectivity. Each fixture can now become part of a group of fixtures and be controlled by On-Board or remote sensors as well as wireless switches or controllers.

9 With this architecture, it is now possible to have fewer fixtures with On-Board sensor which control all of the fixtures of the lighting zone. In order to have grouped controls programmed in factory, it is required that a floor layout with requested grouping and functionality be supplied. Field commissioning is also possible but must be requested and discussed before final Purchase Order is Controls, Lumenwerx fixtures are compatible with most popular BMS integration protocols such as DALI, DMX, EnOcean, BACnet, Enlighted and Lutron Ecosystem just to name a few. Field commissioning is usually required and details must be discussed before final Purchase Order is contact our controls department at for further - Extruded Aluminum ( " nominal) up to 90% Recycled ContentInterior brackets - Die formed cold rolled sheet steel 18 gauge thickJoining system - Die cast Zinc ( " nominal)Reflectors - Cold rolled steel " thick precisely die formed, 95% reflective matte white paintedEnd caps - Die cast Aluminum ( " nominal)Hanger - Chromed Griplock securely attached with spring steel hardware in end caps and/or joinersStem - " diameter threaded steel tube matte white or aluminum powder coating.

10 Custom finishes are also availableWEIGHTVia 3 4ft - - 3 8ft - - 3 12ft - - - Rated for Indoor Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard No. provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our 3 LEDPENDANT DIRECT asymmetric V. 2/ INDIRECT Name: VIA3-PENDANT-DIRECT-ASY-INDIRECT-ASY-SPE CA pril 25, 2019 Page: 4 / (T) 514-225-4304 (F) 514-931-4862 All rights are reserved to LumenWerx ULC. LumenWerx ULC. reserves the right to change or modify product specifications without notification375 LUMEN AT 80 CRI - LOW OUTPUT9006003001200150090060030012001500 2635267891051 PERFORMANCE PER 4'LED outputColor TempWattsDirect LumensIndirect LumensTotal Nominal Delivered LumensEfficacy LPWlow output3000K27150015003000 112low 114low 118500 LUMEN AT 80 CRI - MEDIUM OUTPUT9006003001200150090060030012001500 35070110511402 PERFORMANCE PER 4'LED outputColor TempWattsDirect LumensIndirect LumensTotal Nominal Delivered LumensEfficacy LPWmedium 114medium output3500K30200015003500 116medium output4000K29200015003500 120750 LUMEN AT 80 CRI - HIGH OUTPUT9006003001200150090060030012001500 526105115772102 PERFORMANCE PER 4'LED outputColor TempWattsDirect LumensIndirect LumensTotal Nominal Delivered LumensEfficacy LPWhigh