Vibration Eliminators - Metal hose

1 Refrigeration ConnectorsBulletin No. 302 Vibration EliminatorsTable 1 Anaconda Bronze Vibration Eliminators with Female Copper Tube EndsNominal ActualMaximumFlexibleOverallMaximumTubeP art Copper TubeOperating HoseLengthOutsideEnd (+/-1/4)Diameter(+/-1/8)Number (PIN)WeightSizein.(mm) Numberpsig(barg)in.(mm)in.(mm)in.(mm)in. (mm)Bagged/Boxedlbs(kgs)1/81/41418FZ7001 /47-1 (.05)( )(47)( )(191)( )( ) (.05)1/43/85614FZ7005/168-1 (.07)( )(47)( )(210)( )( ) (.07)3/81/23838FZ5003 (.11)( )(33)( )(229)( )( ) (.)

2 13)1/25/81212FY4501/29-3 (.20)( )(30)( )(248)( ( ) (.21)5/83/41258FY4501 (.23)( )(30)( )(254)( )( ) (.24)5/83/43458FY4503/411-1 (.39)( )(30)( )(286)( )( ) (.43)3/47/83434FY4503/411-1 (.41)( )(30)( )(292)( )( ) (.45)1 1-1 (.57)( )(30)( )(330)( )( ) (.61)1-1/41-3/85454FY5001-1/414-3 ( )( )(33)( )(375)( )( ) ( )1234 56 7 8910 Refer to the Notes on Page 3 SUITABLE FOR USE WITH THE FOLLOWING REFRIGERANTSR12 R125R401B R404A R407C R410A R502R22 R134A R402A R407A R408A R410B R507R23 R401A R402B R407B R409A R412A R508R509 ORDERING INSTRUCTIONSV ibration Eliminators can be ordered by indicatingthe Model Number (column 3), if they are baggedor boxed, or by the Part Identification Number(PIN)

3 In Column FOR USE WITH AMMONIAR efrigerant saturation pressure at 125 F(52 C) maximum and80 F(27 C) minimum must be equal to or less than the designs tabulated are recognized under the componentprogram of Underwriters Laboratories Inc. File 2585. purchased as "bagged" each Vibration eliminator iscleaned and dehydrated for refrigeration service, and sealedin plastic film. When purchased as "boxed" each vibrationeliminator is cleaned and dehydrated for refrigeration service, individually boxed and sealed in plastic maximum test pressure is times the maximum operating pressure which is tabulated in Column minimum burst pressure is 5 times the maximum operating pressure which is tabulated in Column 4.

4 Copper tube ends are designed as sweat connections forrefrigeration tubing. The inside surface conforms toASME/ANSI and configurations are available with male copper tube 2 Anaconda Stainless Steel Vibration Eliminators with Female Copper Tube EndsNominalActualMaximumFlexibleOverallM aximumTubePart Copper TubeOperating HoseLengthOutsideEnd LengthIdentificationTubeO. D.(+/-1/4)Diameter(+/-1/8)Number (PIN)WeightSizein. (mm)Numberpsig(barg)in. (mm)in. (mm)in. (mm)in. (mm)Bagged/Boxedlbs(kgs)1-1/21-5/86464FS 4001-1 ( )( )(27)(38)(432)(60)(50) ( )22-1 ( )( )(24)(50)(508)(83)(64) ( )2-1/22-5/85252FS3002-1 ( )( )(20)(64)(610)(99)(76) ( )33-1 ( )( )(20)(76)(686)(114)(89) ( )3-1/23-5/87272FS1503-1 ( )( )(10)(89)(584)(125)(82) ( )44-1 ( )( )(10)(102)(635)(146)(111) ( )

5 12345678910 Vibration EliminatorsSynthetic covered Vibration Eliminatorsare available for use when problems existfrom condensation and freezing ofmoisture on the outside surfaceof the Vibration warranty is given by Universal Metal Hose (Universal),located at 2133 South Kedzie, Chicago, Illinois 60623-3393, (773) 277-0700, for the benefit of the first purchaser of theproduct to which the warranty applies. This warranty applies only to those parts which are manufactured and delivered byUniversal. The warranty is that the parts manufactured and delivered byUniversal will be free from defects in material or workmanshipunder normal use and service for the time specified below.

6 In the event of failure of a part due to such a covered defect,Universal will repair or replace, at its option, the defective part atits factory location at 2133 South Kedzie, Chicago, Illinois60623-3393. The part must be returned to the factory by and at the expense ofthe person claiming the benefit of the warranty. The warranty shall be for a period of twenty-four (24) monthsafter the date of delivery of the product, twelve (12) months aftercommencement of use of the product, or the specified servicelife of the product, whichever period is the shortest.

7 All productsfor which warranty claims are made must be returned as providedabove to the factory within thirty (30) days from the date ofclaimed malfunction in order for this warranty to be only entity authorized to do any warranty repair is the manufacturer. The repairs or replacement by Universal will be accomplishedwith in forty-five (45) days from receipt of the defective parts atthe warranty is expressed in lieu of all other warranties,expressed or implied, including the warranty of merchantability,the implied warranty of fitness for a particular purpose, and of allother obligations or liabilities on the part of Universal and it neither assumes nor authorizes any other persons to assume forUniversal any other liabilities in connection with the sale of theproducts.

8 This warranty does not cover parts of products made by othersor products or any part thereof which have been repaired oraltered, except by Universal, or which shall have been subjectedto misuse, negligence or accident. Universal shall not be liable for damage or delay suffered by thepurchaser regardless of whether such damages are general, special or consequential in nature, whether caused by defectivematerial or workmanship or otherwise, or whether caused byUniversal's negligence regardless of the degree.

9 INSTALLATION INSTRUCTIONS2133 South KedzieChicago,IL 60623-3393 Voice:(773)277-0700 Fax:(733)277-07271-800-MET-HOSE (638-4673) Direct the torch away from the ferrule and braided contact of the flame with the ferrule and Brazing and soldering flux must be removed immediatelyafter installation. Chlorides will cause premature failure ofstainless steel Vibration Wrap the ferrule and approximately 2" of the braid witha wet cloth to prevent overheating during brazing and WarrantyWATERTIGHTCOVER4.

10 If condensation will collect and freeze: the entire flexiblesection, ferrules and braided hose, must be covered withwater tight Vibration Eliminators are most effective when installedperpendicular to the major motion. The fixed end should besecurely anchored as close as possible to the VibrationEliminator. When major motion exists in two planes twoVibration Eliminators should be SECURELYAS CLOSE AS POSSIBLETO Vibration ELIMINATORDIRECTION OFVIBRATIONSOURCE OF VIBRATIONDIRECTION OFVIBRATION 17111 South Wallace StreetSouth Holland, IL 60473-2735 Voice: 773-277-0700 Fax.