VORTEX USER MANUAL - CAMCO Amplifiers

1 VORTEX user MANUALUSER MANUALVORTEX 6, 4, and 200VP. 1 INFORMATION FOR USE FOR MODELS VORTEX 6, VORTEX 4, VORTEX and VORTEX 200 VVUM_GB_2005-2008-R4_11-2008 Copyright 2008 by CAMCO Produktions- und Vertriebs-GmbHf r Beschallungs- und BeleuchtungsanlagenFischpicke 5, D-57482 Wenden, Germany Telephone +49 (0) 2762 408-0 IMPORTANT safety INSTRUCTIONSUSER MANUALVORTEX 6, 4, and 200VP. 2 IMPORTANT safety INSTRUCTIONS1) Read the information for use ( user MANUAL ).2) Please keep this user MANUAL in a safe place during the lifetime of the am-plifi er. The user MANUAL forms an integral part of the amplifi er. Reselling of the amplifi er is only possible if the user MANUAL is available. Any changes made to the amplifi er have to be documented in writing and passed on to the buyer in the event of ) Heed all ) Follow all )Do not use this amplifi er near water (for example, in damp rooms or near a swimming pool).

2 Do not place any object fi lled with liquids, such a vase, on the amplifi ) Clean only with dry ) Do not block any ventilation openings. Install in accordance with the user ) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce ) Protect the power cord from being walked on, pinched or damaged in any other way. Pay particular attention to plugs and the point where they exit from the amplifi ) The amplifi er may only be used in accordance with the information provided in the user MANUAL . Before and during the usage of the amplifi er please ensure that all recommendations, especially the safety recommendations as detailed in the user MANUAL , are adhered VORTEX -Amplifi er is designed for the amplifi cation of pulsed audio signals and the amplifi er should only be connected to speakers with an average impedance that is not lower than the impedances specifi ed in points , and ) Do not place this amplifi er on an unstable cart, stand, tripod, bracket, or table.

3 The device may fall, causing serious injury, and serious damage to the device ) The amplifi er can only be disconnected from the power supply by removing the plug, which must be freely accessible at all times. Unplug this amplifi er during lightning storms or when unused for long periods of ) Refer all servicing to qualifi ed service personnel. Servicing is required when the power-supply cord or plug has been damaged, liquid has been spilled or objects have fallen into the amplifi er, the amplifi er has been exposed to rain or moisture, the amplifi er has been dropped or suffered damage in any other way, the amplifi er exhibits a distinct change from its normal function or RISK OF ELECTRIC SHOCK DO NOT TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS AMPLIFIER TO RAIN OR HIGH VOLTAGE HAZARDS EXIST WITHIN THIS PRODUCT.

4 REFER ALL SERVICING TO AUTHORISED OF ELECTRIC SHOCKDO NOT OPENTHE LIGHTNING FLASH WITH ARROW HEAD SYMBOL ALERTS THE user TO DANGEROUSLY HIGH VOLTAGE AT THE SPEAKON CONNECTORS THAT COULD POTENTIALLY BE LIFE LIGHTNING FLASH WITH ARROW HEAD SYMBOL, IS INTENDED TO ALERT THE user TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT S ENCLOSURE. THE EXCLAMATION MARK IS INTENDED TO ALERT THE user TO IMPORTANT instructions ALSO FOR MAINTENANCE IN THE LITERATURE ACCOMPANYING THE AMPLIFIER MAY ONLY BE CONNECTED TO A SOCKET WITH A CONNECTION TO OF SYMBOLS / SAFETYUSER MANUALVORTEX 6, 4, and 200VP. 31. Read the information for use ( user MANUAL )When shipping the VORTEX amplifi er, always use the original shipping carton and packing materials.

5 For maximum protection, repack the unit as it was origi-nally packed at the Environments Use this amplifi er only in E1, E2, E3 or E4 environments according to EN55103-2 Electromagnetic compatibility Product family standard for audio, video and audio-visual and entertainment lighting control apparatus for professional use Part 2: Immunity 3. VentilationSlots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the amplifi er and to protect it from overheating. These openings must not be blocked or covered. This amplifi er should not be installed unless proper ventilation is provided or manufacturer s instructions have been adhered Water And MoistureDo not use this amplifi er near water (for example, in damp rooms or near a swimming pool).

6 5. CleaningUnplug this amplifi er from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. 6. Power-cord ProtectionPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them, paying particular atten-tion to cords and plugs, and the point where they exit from the amplifi MANUALVORTEX 6, 4, and 200VP. 47. LightningFor added protection of this amplifi er during lightning storms, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the amplifi er due to lightning and power-line surges. Disconnection from the mains power supply can only be achieved by removing the plug from the mains socket and by external disconnecting all poles from the Interference of external objects and/or liquids with the applianceNever push objects of any kind into this amplifi er through openings as they may touch dangerous voltage points or short out parts that could result in a fi re or electric shock.

7 Never spill liquid of any kind on the amplifi AccessoriesDo not place this amplifi er on an unstable cart, stand, tripod, bracket, or table. The amplifi er may fall, causing serious injury, and serious damage to the product. Any mounting of the amplifi er should follow the manufacturers instructions , and should use a mounting accessory recommended by the ConnectingWhen you connect the amplifi er to other equipment, turn off the power and unplug all of the equipment from the supply source. Failure to do so may cause an electric shock and serious personal injury. Read the user MANUAL of the other equipment carefully and follow the instructions when making the Sound VolumeReduce the volume to minimum before you turn on the amplifi er to prevent sudden high levels of noise which may cause hearing or speaker damage.

8 (See also Volume control)12. Damages that require serviceUnplug this amplifi er from the mains supply and refer to your dealer/distributor or other authorised repair workshop if any of the following situations occur: if liquid has been spilled, or objects have fallen into the amplifi er if the amplifi er does not operate normally as described in the user MANUAL . Operate the controls only as described in the user MANUAL . if the amplifi er has been dropped or damaged in any other way. when the amplifi er exhibits a distinct change from its normal function or ServicingDo not attempt to service this amplifi er yourself. As opening or removing covers may expose you to dangerous voltage or other hazards, the amplifi er may only be opened by qualifi ed personnel.

9 Please refer to your Servicing and Replacement PartsAll service and repair work must be carried out by a CAMCO authorised dealer. When replacement parts are required, please ensure that the dealer/distributor only uses replacement parts specifi ed by the manufacturer. The use of un-authorized replacement parts may result in injury and/or damage through fi re or electric shock or other electricity-related safety CheckUpon completion of any service or repairs to this product, ask the dealer/distributor to perform safety checks to determine that the amplifi er is in proper operating condition. Recommendations on how to carry out the safety test can be found in DIN VDE 0701-1 Maintenance, Modifi cation and Test of Electronic Appliances.

10 EC DECLARATION OF CONFORMITYUSER MANUALVORTEX 6, 4, and 200VP. 5EC Declaration of Conformity in accordance to EC Directives:electro-magnetic compatibility (Council Directive 89/336/EEC, as amended by Directives 92/31/EEC and 93/68/EEC);low-voltage electrical equipment (Council Directive 73/23/EEC )Manufacturers Name: CAMCO Produktions- und Vertriebs-GmbHf r Beschallungs- und BeleuchtungsanlagenManufacturers Address:Fischpicke 5, D-57482 Wenden, GermanyDeclares that the product with the model name: CAMCO Power amplifi er VORTEX -6, VORTEX -4, and VORTEX -200 VConforms to the following standards: EN60065 safety EN55103-1 Emission EN55103-2 Immunity The operating conditions and application environments presupposed in the information for use ( user MANUAL ) are to be kept Note: The following formulations have been chosen: VORTEX -6, VORTEX -4, and VORTEX -200V for the type plate and for the EC de claration of conformity.