Warmline XPS - Insulation Online

1 Warmline XPSE xtruded Poly Bonded to PlasterboardThe Warmline insulating laminates are designed as a simpleeffective way to improve the thermal efficency in both wallsand roof applications. They are fully applicable with Part Lof the building andDrywall ProductsFixing instructions for Dot and dablFor bonding Warmline range to a wall use a proprietarygypsum based follow the manufacturers instructions. As permanufacturers recommendations apply a continuousribbon of adhesive around any 3 vertical rows of adhesive dabs to the walls at300mm centres. Also insure that there is a continuousbead at the bottom and the adhesive has set fix a minimum of 2 insulationanchors through the board into the wall. They must gointo the masonry by a minimum of instructions for mechanical fixinglFix to the wall treated batons 50mm x 25mm at amaximum of 600mm centres.

2 Also fit horizontal batons atboth floor and ceiling fit the Warmline board using drywall screws at150mm centres. Always insure that they penetrate thebatons by installing boards to rafters fix them at right anglesto the timbers. To ensure a solid finish bridging pieces areto used inbetween the Manufacturers & DistributorsFor more details you can contact our technical teamUnit 6, Coopers Point, Coopers Lane, Knowsley Industrial Park, Liverpool L33 7 UBSales: 07872 989689 Main Depot: 01515 463260 Fax: 0151 5484543 ProductDescription OverallFoamPlasterboardSheets m2perThermalU-valueU-valueCode & SizeThickness Thickness Thickness per Pallet Board Resistance Fixed BatonsDot & DabR-value(W/m2K)(W/m2K) x toPlasterboardCalculations are based on a 215mm thick solid brickwork wall and includes a 2mm plaster skim coat.

3 Timber battens are 25x50mm at 600mm CentresExtruded Poly Bonded to Plasterboard BenefitslAll thicknesses readily availablelSimple solution to upgrading walls and roofslQuick and easy to installlCan be used for both newbuild and refurblA simple way to meet building regulationslCost effective returnTechnical Specifications