Water, Sewer Fittings Flange B-22 Adaptors - E.J. …

1 Phone: 800-EJP-24HR (357-2447) Fax: JointsThe Dismantling Joint is a double flanged fitting that allows longitudinal adjustment in flanged pipe systems. It provides greater flexibility at both the planning and instal-lation stages of flanged piping Applications: The Dismantling Joint is particularly suitable for sim-plifying the installation and removal of:Isolation valves Non return valves Flow metering equipment Pump sets Pressure reducing valves Flanged pipe and Fittings Typical Dismantling Joint applications include.

2 Pump-ing stations, water treatment and sewage treatment plants, plant rooms, meter chambers, power generation equipment and gas distribution & Benefits:lo n g i t u d i n a l ad J u s tM e n tA maximum of 2" of longitudinal adjustment can be achieved, depending on diameter (see table on next page).This adjustability is provided by the telescopic action of the flanged spigot within the Flange adaptor. Once the required length is achieved, the Dismantling Joint can be locked at that length with the tie bars supplied.

3 This longi-tudinal adjustment allows for fast and simple maintenance of valves, pumps etc. and simplifies future piping modifica-tions, often resulting in reduced down time and eliminating the need for more complex anchoring s e o F i n s t a l l a t i o nThe Dismantling Joint can be installed with a spanner and a torque e e d o F i n s t a l l a t i o nDismantling Joints are supplied with high tensile steel tie bars which means fewer tie bars are required, conse-quently there are fewer tie bars than Flange holes, making installation faster and simpler.

4 The tie bars supplied with the Dismantling Joint also act as Flange jointing bolts, reducing the number of Flange bolts a l i n gThe gasket of the Dismantling Joint is compressed independently of the tie bars. Compression of the gasket is achieved by following standard Flange adaptor instal-lation procedures, speeding installation. It also allows for a socket and torque wrench to be used, ensuring that sealing failure cannot occur as the gasket is compressed to the required n g eDismantling Joints are available in any nominal size from 11 2" and larger with most common Flange drillings.

5 Dismantling Joint specials for specific project requirements can also be r r o s i o n a n d P r o t e c t i o nThe Flange adaptor and Flange spigot components of the Dismantling Joint are coated with the thermoplastic polymer Rilsan Nylon 11 as standard. Rilsan Nylon 11 has met and is approved to the stringent performance standards of WIS 4-52-01(part 1) which requires the highest adhesion, flexibility, penetration and impact resistance characteristics, ensuring that Dismantling Joints are well equipped to withstand transport, storage, site and corrosion damage.

6 Alternative finishes are also available. All tie bars are ZN3 Zinc r k i n g P r e s s u r e All Dismantling Joints are fully end load resistant and have a pressure rating equal to that of the l l F a c e F l a n g eFor applications where a full face Flange is required, the Flange of the spigot piece provides a full Flange sealing o d u c t q u a l i t yDismantling Joints are designed and manufactured un-der quality management systems to BS EN ISO 9001:1994 and have been tested to the most exacting performance requirements of WRc water Bylaws scheme (WBS).

7 Ga s k e t sDismantling Joints are fitted with grade E (EPDM) water quality gaskets as standard. For other applications or alternatives, please ask for " Dismantling Joint in plant room applicationFlange AdaptorsWater, Sewer & Drain FittingsB-22 Phone: 800-EJP-24HR (357-2447) Fax: JointsDismantling Joint installed on 6" Gate ValveFlange AdaptorsNOMINAL SIZEFLANGE DRILLING NOMINAL LENGTHMINIMUM LENGTHMAXIMUM OF TIE BARSDIAMETER & LENGTHWEIGHT (LBS.) "ANSI " " " "41 2" " "ANSI " " " "45 8" " "ANSI " " " "45 8" " "ANSI " " " "45 8" " "ANSI " " " "45 8" " "ANSI " " " "43 4" " "ANSI " " " "43 4" 13" "ANSI " " " "43 4" " "ANSI " " " "47 8" " "ANSI " " " "47 8" " "AWWA " " " "41" " "AWWA " " " "41" " "AWWA " " " "411 8" " "AWWA " " " "411 8" " "AWWA " " " "411 4" " "AWWA " " " "611 4" " "AWWA " " " "711 4" " "AWWA " " " "811 2" " "AWWA " " " "911 2" " "AWWA " " " "1111 2" "

8 "AWWA " " " "1115 8" " "AWWA " " " "1315 8" " "AWWA " " " "2013 4" " "AWWA " " " "1617 8" " , Sewer & Drain FittingsB-23 Phone: 800-EJP-24HR (357-2447) Fax: Adaptors For Ductile Iron and Steel PipeFlange Adaptors are your answer to fast and efficient Flange installations in the field. By using ductile iron or steel pipe cut to dimension and a Flange adaptor, you can quickly connect to virtually any 125 lb. faced and drilled Flange . A mechanical joint type gasket is included with the Flange adaptor and standard Flange bolts and nuts are used to make the connection.

9 No other gaskets are Adaptors join plain end pipe of ductile iron or steel, to Flange valves, pumps, Fittings and pipe virtually all types of liquid and process equipment. They require no threading or welding, and allow for pipe misalignment. The set screws eliminate additional restraining connections and prevent blow-off. Set screws should be tightened to 70 ft. lbs. Point Set ScrewPipe SealingPositive Flange Gasket SealingInstallation Notes: Flange Adaptors are used for field installations in lieu of standard threaded pipe flanges when the latter are found to be impractical due to time and/or cost screws are an integral part of the adaptor to give restraint and to prevent blow-off.

10 The set screws should be tightened to 70 ft. lbs are mechanical joint type and are furnished with the Flange Adaptors are 125 lb. faced and drilled. NOTES:250 lb. faced and drilled Flange Adaptors are available by special Adaptors cannot be installed face to face. Flange AdaptorsSIZEPRODUCT NUMBERDUCTILE IRON "37005370103"37015370204"37025370306"370 35370408"370453705010"370553706012"37065 3707014"370753708016"370853709018"370953 710020"371053711024"3711537120 water , Sewer & Drain FittingsB-24 Phone: 800-EJP-24HR (357-2447) Fax: Adaptors For PVC PipeFlange Adaptors join plain- end PVC pipe to valves, Fittings , pumps and virtually all types of liquid and process equipment.