Example: marketing

Waterborne emulsified-asphalt dampproofing …

97391 210 Hydrocide 9/14/01 4:05 PM Page 1. 210.. Waterproofing Systems SONOSHIELD . HYDROCIDE 600, 700, 700B. Waterborne emulsified - asphalt dampproofing compounds Features Benefits Where to Use Suitable for green or slightly damp surfaces Speeds dampproofing of new foundation walls Hydrocide 600, 700. Nonflammable Minimizes fire hazards during application and 700B. Uncured material may be cleaned with water User friendly Exterior surfaces below grade Flexible Withstands normal expansion and contraction Faces of cavity walls -40 to 150 F (-40 to 66 C) service temperature Suitable for most climates Bonds polystyrene insulation to range many substrates Exterior grade gypsum board How to Apply Hydrocide 600, 700, and 700B.

Waterproofing Systems 210 SONOSHIELD® HYDROCIDE® 600, 700, 700B Waterborne emulsified-asphalt dampproofing compounds ® 7 07110 BITUMINOUS DAMPPROOFING Where to Use Hydrocide® 600, 700

Tags:

  Compound, Asphalt, Waterborne, Waterborne emulsified asphalt dampproofing, Emulsified, Dampproofing, Waterborne emulsified asphalt dampproofing compounds

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Waterborne emulsified-asphalt dampproofing …

1 97391 210 Hydrocide 9/14/01 4:05 PM Page 1. 210.. Waterproofing Systems SONOSHIELD . HYDROCIDE 600, 700, 700B. Waterborne emulsified - asphalt dampproofing compounds Features Benefits Where to Use Suitable for green or slightly damp surfaces Speeds dampproofing of new foundation walls Hydrocide 600, 700. Nonflammable Minimizes fire hazards during application and 700B. Uncured material may be cleaned with water User friendly Exterior surfaces below grade Flexible Withstands normal expansion and contraction Faces of cavity walls -40 to 150 F (-40 to 66 C) service temperature Suitable for most climates Bonds polystyrene insulation to range many substrates Exterior grade gypsum board How to Apply Hydrocide 600, 700, and 700B.

2 Surface Preparation finished grade. Two-coat system: Apply a Hydrocide 700 and Hydrocide . Surface should be free of oil, Backfilling: Place backfill at prime coat of Hydrocide 600 asphalt 700B are excellent vapor retarders. grease, dirt, laitance, and loose least 24 to 48 hours after applica- emulsion, cut 20% by volume with Apply in 1 coat, carrying the coating material. Dry surfaces must be tion, but within 7 days. Do not clean water. Allow prime coat to dry in and around all joints, grooves, and dampened with water and kept rupture or damage the film or tacky to touch and apply 1 coat of slots, following all reveals and soffits damp until application. displace the coating or membranes. Hydrocide 700 as described above of windows and continuing 12 (305.)

3 Some situations may require under Dense Surfaces. Allow to set mm) out on adjoining partitions and Application protection board. and backfill as described above under soffits. Hydrocide 600 may also be Hydrocide 700 is applied with a Backfilling. used. Use 1, 2, or more coats, as trowel. Hydrocide 600 and 700B Exterior surfaces below grade Parge coat system: Apply a needed, depending on amount of are applied by brush, roller, or spray porous surfaces parge coat of cement mortar to the vapor retarding called for. with the proper equipment. Consult Three alternate techniques are block wall, carrying the parge coat Allow to set. If walls are to the spray equipment manufacturer equally effective. from the bottom of the footings to receive hard wall plaster, use furring for more information.

4 Membrane system: Apply 1 grade level and forming a cove at strips or metal lath. coat of Hydrocide 700 or 2 coats of the junction of the wall and footing. Hydrocide 700 and 700B. Exterior surfaces below Hydrocide 700B as described above Allow to cure (typically 7 days). have been used successfully for grade dense surfaces under Dense Surfaces. Within 4 Apply either 1 trowel coat of Apply Hydrocide 700 in 1 coat bonding polystyrene insulation hours, apply Sonoshield Reinforcing Hydrocide 700 or 2 brush, roller, by trowel. Apply 700B in 2 coats by board to a wide variety of Fabric or glass fabric membrane or spray coats of Hydrocide 700B. brush, roller, or spray. Allow first coat substrates. On-site testing with cloth over all surfaces of coating, as described above under Dense to dry tacky before applying second actual substrate is recommended.

5 Overlapping all edges at least 3 Surfaces. Allow to set and backfill as coat. (76 mm) . Press firmly into place described above under Backfilling. Clean Up Fill in all crevices and grooves, without wrinkles. Within 24 hours, Clean tools and equipment making sure coating is continuous apply an additional coat of Interior surfaces above grade immediately with hot, soapy water. and free from breaks and pinholes. Hydrocide 700 or Hydrocide 700B. vapor retarder Cured material can be removed with Carry coating over exposed top and Allow to set and backfill as described Hydrocide 600, 700, and 700B Reducer 990. outside edge of footing. Spread above under Backfilling. may be used individually or in around all joints, grooves, and slots combination for dampproofing and into all chases, corners, reveals, the exterior face of interior walls in and soffits.

6 Bring the coating to cavity wall construction. For Best Performance Protect from rain until coating Do not apply at temperatures Make certain the most current Proper application is the respon- has set. below 40 F (4 C) or when tem- version of this data guide is sibility of the user. Field visits by ASA specifications require furring peratures are expected to fall to being used; call Customer ChemRex personnel are for the or lath or similar design features 40 F (4 C) in the next 24 hours. Service (1-800-433-9517) to purpose of making technical to ensure absolute adhesion of Do not use Hydrocide 700 and verify the most current version. recommendations only and are plaster. 700B as plaster-bonds on ceilings Not intended as a waterproofing not for supervising or providing or under Portland cement mixes membrane.

7 Refer to HLM 5000 quality control on the jobsite. Keep from freezing in the container. on ceilings. (Form No. 1017900). Hydrocide products should be Hydrocide products should not protected or covered within be exposed to long-term UV. 7 days of application. 7. 07110. BITUMINOUS dampproofing . 97391 210 Hydrocide 9/14/01 4:05 PM Page 2. Technical Data Compliances Typical Properties Hydrocide 600 complies with ASTM D 1187, Type 1, and % Solids by volume % Solids by weight ASTM D 1227-95, Type 3, Class I. Hydrocide 600 50 52. Hydrocide 700 complies with Hydrocide 700 52 54. ASTM D 1227-95, Type 2, Class I Hydrocide 700B 51 53. and ASTM D 1187, Type 1. Hydrocide 700B complies with ASTM D 1227-95, Type 2, Class I, and ASTM D 1187, Type 1.

8 Viscosity Result Method Hydrocide 600, KU 95 - 105 Stormer Hydrocide 700 325 - 335 Penetrometer, 16 oz. cup, 150 g. weight Hydrocide 700B, KU 110 - 120 Stormer Order Information 55 Gallon Drums 5 Gallon Cans Coverage (208 L) ( L) Hydrocide 600 70 - 100 sq. ft. per gallon per coat Hydrocide 600, lbs. (kg) 47 (21) ( - m2/L). Hydrocide 700, lbs. (kg) 520 (236) 47 (21) Hydrocide 700 1/16 wet film: 25 sq. ft per gallon Hydrocide 700B, lbs. (kg) 47 (21) ( mm wet film: m2/L). 1/8 wet film: sq. ft. per gallon Hydrocide 600: A nonfibrated Do not allow these materials to freeze (3 mm wet film: m2/L). in container; do not store below Hydrocide 700B 30 - 35 sq. ft. per gallon per coat asphalt emulsion dampproofing 35 F (2 C).

9 ( - m2/L per coat). for application by brush or spray. Hydrocide 700: Fibrated asphalt - Shelf life is typically 1 year when emulsion dampproofing for stored in unopened containers application by trowel. under normal conditions. Hydrocide 700B: asphalt emul- sion similar to Hydrocide 700, but reinforced with shorter fibers for brush or spray application. Caution handling. Use only with adequate minutes. SEEK IMMEDIATE MEDICAL Proposition 65. ventilation. Keep container closed ATTENTION. In case of skin contact, This product contains materials listed Hydrocide 600, 700 and 700B when not in use. DO NOT take remove completely with dry cloth, by the state of California as known to contain asphalt , petroleum, silica, internally.

10 Use impervious gloves, eye then wash affected areas with soap cause cancer and birth defects or aluminum silicate protection and if the TLV is exceeded and water. If irritation persists, SEEK other reproductive harm. or if used in a poorly ventilated area, MEDICAL ATTENTION. If inhalation Risks use NIOSH/MSHA approved respiratory causes physical discomfort, remove VOC Content May cause skin, eye and respiratory protection in accordance with applica- to fresh air. If discomfort persists or Hydrocide 600, 700, and 700B. irritation. Ingestion may cause ble federal, state and local regulations. any breathing difficulty occurs or if contain 30 g/L or lbs. of VOC. irritation. All label warnings must be observed swallowed, SEEK IMMEDIATE MEDICAL per gallon of coating less water and until the container is commercially ATTENTION.


Related search queries