Western Railway Equipment Services

1 Western Railway Equipment Services Office (928)427-0275 Mobile (928)231-0412 Email 606 02-25-11 ADZERS Nordeberg tie adzer, F4L engine, Sale or Lease (ON) Nordberg tie adzer, 4 cylinder gas engine, self propelled. (OK) ANCHOR, CLIP APPLICATORS & TIGHTENERS 2001 Fairmont Tamper Anchor Applicator 306-B; Det engine; Serial #257083VG! (SC) 1997 Fairmont 306-B-2-3 Anchor boxer. Powered by a John Deere, rebuilt in 2006. (LA) 1978 Racine Anchor Applicator, Deutz diesel. (MO) Racine high speed Anchor adjuster, F3L Deutz. Sale $4, , Lease $1, (ON) Nordco Model D anchor applicators. (IL) Racine dual anchor spreader, F3L Deutz. Sale or Lease (ON) Four Modern Track 2003 walk behind clip applicators.

2 Two machines never used, the other two used very little for one job. The heads on these machines both install and remove the E Clips, and it takes only a minute to reverse the jaws to remove or install. The heads are removable as well, with cannon plug for the electric and two small quick connect hydraulic lines. (TN) Fairmont MBCR clip remover. Good Condition. 4 cyl Deutz. (IL) 1988 Racine-Pandrol dual clip applicator, Deutz diesel. (MA) 80s Racine clip applicator, Perkins Diesel. (MO) BALLAST BROOMS, COMPACTORS, CRIBBERS, CONSOLIDATORS & SCARIFIERS Fairmont W-87 Rotary Scarifier w/ extensions. Ser. #255352. Good working condition. (SD) Fairmont W-87 Rotary Scarifier. Very good condition and has been shopped (LA) Kershaw double broom, DD engine.

3 Sale or Lease (ON) Tamper Double Boom Model DB. Sale or Lease! (LA) Canron Ballast Consolidator CSC-2, Serial #A481747. (KY) Jackson 3100 Ballast Consolidator. Returned rental, has been stored in Serviceable condition. (ON) Kershaw 16-1 Brush Kribber. (OK) Kershaw 16-1 ballast cribber. 2 cyl. Wisconsin. (WA) Kershaw 16-1 ballast cribber. (SC) Kershaw 44-1 lateral Scarifier. In shop getting new engine, hoses cylinders & more. (LA) BALLAST REGULATORS 60 s Kershaw 2FW-G regulator. Great for contractors, small & easy to move. 6 cyl. gas engine, open cab. Cable operated wings & plow, stationary wire rope broom. 15,000 lbs., legal load if wings taken off. (IL) Kershaw 2FW-G, gas engine regulator.

4 No plow! (KY) 86 Pyke Model M, comes with snow wings, plow and blower. Ser. #8601 (MN) Kershaw 46-6 Ballast Regulator has been through our shop and tested on a job in Iowa. Needs paint but waiting on potential customer to let us know what colour he would want. (OK) Kershaw 26-3 regulators. Converted by the railroad with Knox-Kershaw kits in 2000 and 2001, they were Renumbered by their dates of rebuild. 3-53s and 3-53 Tubos. Rear entry w/ single pass plows and A/C. (LA) 1984 Kershaw 26-3 kit conversion. (ON) Kershaw 26-2-2, 4-53 Det., 4-spd trans. Sunstrand travel pump, single pass plow, good elements on broom. New paint and shopped. (LA) Kershaw 26-2. DD 3-53, replaced front axle, repaired drive shaft, and more.

5 (MO) Kershaw 26-2-2 with single pass plow, good running machine but needs paint. (WA) Kershaw 26-2 with new cab kit. Rear entry and in very good condition. (IL) 1977 BEB-17 w/ hydraulic wings. New pumps and brooms, overhauled trans., gear boxes And rear ends. (KY) BEA-17, an old machine but it still has many hours of work in it. (NC) 1989 C-154 ballast regulator, at our shop, needs some work. A Running, working machine! (LA) 1991 C-154 ballast regulator. Was a Good Working machine until transmission went out. (LA) C-154 ballast regulator. A good machine, needs shaft for hydraulic pump. W/ parts machine. (TX) Kershaw 26 plow and frame, needs cylinders. (GA) BALLAST TAMPERS Mk-III ECTR railroad surplus from a Canadian Railroad.

6 Had new transmission and vibratory heads added. Parked two years ago, but recently started and found in good working condition with minor repairs needed. (MI) 1998 Mk-IV Production tamper. Bought two years ago from the original owner. The previous owner Had put $100, into it before it was sold and that included a new engine. It now has 200 hours on the engine (PA) 1991 Mk-III ECTR in Excellent Condition. Graph table, 4X drive & ready to work. (SC) 1990 Mk-III ESTR 4-3B Cummins, rebuilt 7 mos., ago and used 50 hrs. since. Compuliner with laser system needs cannon. Good working machine. (TX) 1985s Mk-III ESTR, CN 63609 (KY) Early 80s Mk-II E-JD with jacks, lights and buggies, very good condition. (AR) Mk-II Chase tamper w/ total of 3,031 hrs.

7 Good Working Condition! (KY) 84 Mk-II Switch tamper w/ jacks. JRA_JDG Ser#674946. Needs repairs in wiring. (MO) Mk-II Torsion beam, ETDG. Ser/ 476516. (MN) Late 80s Mk-I Torsion beam, ETDG. Solid beam, no welds, runs well, needs glass. (PA) 1984 Mk-I EAS Switch tamper, no jacks, 4-71 Det. Just shopped, painted & replaced pins & bushing in work heads. (LA) 1980 Mk-1 Switch tamper, no jacks. (NC) Mk-I with jacks, not a switch tamper. (NC) Mk-I JRA pup 4-71 Detroit. Chase. No switch, west coast machine. Good Condition. (NE) Canron STM chase tamper rebuilt at our shop. Several machines available. (LA) Canron STM chase tamper.

8 DD engine. Sale or Lease (ON) Canron Chase tamper. Very nice condition and working. (ON) Canron Vibratool, no jacks, doesn t do switches, but a working machine. (WA) Canron Juniour, switch tamper, good for spot & chase tamping. (SC) Jackson 7000 production tamper. Ex-military and in good working condition. Needs some minor work. A good machine priced for savings. (WA) Remanufactured 6700 tamper, laser capable version curve liner. New Cummins, 4X drive, oil cooler kit, work heads, all pumps and gear boxes are new or rebuilt, new light sensors & hosing. this unit has been completely remanufactured and is ready for work. (OK) 4 Jackson 6700 Production Tampers. Early 90 models, were rebuilt by their railroad between 2001 and 2004.

9 All equipped with Cummins diesels, direct drive rear ends, laser liners, curve computers and A/C. Some are available w/ quick deployment buggies. They may be inspected at our shop may be seen while on a job (LA) 1991 Jackson 6700, rebuilt 2004, Cummins diesel, direct drive rear end, four wheel drive, a/c, quick deployment Buggies, new laser liner, version curve computer. (LA) 93 Jackson 6700 stretch cab, laser, system, a hard working machine! (AZ) Jackson 6500, put through the shop with extensive repairs. DD 4-73, 4 spd trans., chain drive, two wheel drive. Serviced and ready to work. (MO) Jackson 6500 Production tamper with travel cab. A good working machine and well taken care of. Will be overhauled at the end of September complete in from is going to be done and the radiator re-cored.

10 (MI) 1983 6500 that can be used as a parts machine or parted out. It is complete. (LA) 1980 Jackson 6000 w/ jacks. (KY) Jackson 3300s. Have some coming in from the railroad. (LA) 1979 Jackson 2900E chase tamper (SC) 1974 Jackson 2600 enclosed cab tamper w/ jacks. 3-53 Detroit. (SC) 1981 Jackson 2400 switch tamper with jacks. Ser.# 131383. Enclosed cab with a 3-53 Detroit diesel engine. (MN) Early Model Jackson 2300s, complete and are available for parts. (OH) 1975 Jackson 900 Tamper with jacks. Has a 4 cylinder John Deere diesel. (MN) Complete set of lights & buggies for a Jackson 2600, described in good condition. (SC) Complete set of light buggies for a Jackson 2300, good shape.